TRENDnet Support Publishing \NETWARE\PRSNLNW.TXT TE-210CT PCMCIA Ethernet Card Installation for Personal Netware Contents -------- .Introduction .Requirements .Minimum Skill Level .Getting Started Introduction ------------ The ODI driver program allows you to run multiple protocol stacks and install up to two network adapters in a workstation. This ODI driver supports the Port, Node Address, Protocol and Frame options for creating your own NET.CFG file. For more information on these keywords, please refer to Novell's "NetWare ODI shell for DOS - NET.CFG options". This installation assumes that the PCMCIA drivers are working properly. Please consult README.TXT in the root directory for help with PCMCIA Drivers. Getting Started will describe the installation instructions. Requirements ------------ .A PCMCIA compatible Laptop .A PCMCIA chipset that is PCIC compatible (Intel, Cirrus, Vadem, and VLSI) or a Card Service has been installed .Personal Netware network operating system .A TE-210CT PCMCIA Ethernet Card .A knowledge of basic DOS commands and editing text files Minimum Skill Level ------------------- .A knowledge of basic DOS commands .A knowledge of editing text files .A knowledge of DOS basic file structure (CONFIG.SYS and AUTOEXEC.BAT) .A knowledge of the network driver configuration being used .Please see Support Options if you are not comfortable will this skill level Getting Started --------------- 1. Follow the normal installation procedure as described by Personal Netware. 2. It will prompt the user for a network driver choose "Other Network support driver". 3. It will request a path for the drivers. Respond with the path of the ODI DOS driver, .INS file, and NET.CFG sample installed with this readme. 4. Run STARTNET to access the Novell network.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.