; VA16X.INF -- This file contains descriptions of VAIO CD-ROM ; Host Adapters supported in Windows 95,98 and 2000 ; Copyright 2000 Sony Corporation, All rights reserved. [version] signature="$Windows NT$" ;Class=hdc ;ClassGuid={4D36E96A-E325-11CE-BFC1-08002BE10318} ; hdc Class=SCSIAdapter ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318} ; scsi Provider=%SONY% ;;~LayoutFile=layout.inf ;;~CatalogFile=va16x.cat Catalogfile=va16.cat Catalogfile.NTx86=va16w2.cat DriverVer=03/10/2000,1.10.02 ;;~;============================================= ;;~; Class Install ;;~[ClassInstall32.NT] ;;~Addreg=SCSIClass ;;~;Addreg=HDC_Class ;;~[SCSIClass] ;;~HKR,,,,%SCSIClassName% ;;~HKR,,Installer32,,"SysSetup.Dll,ScsiClassInstaller" ;;~HKR,,Icon,,"-10" ;;~HKR,,LegacyInfOption,,"SCSI" ;;~HKR,,DeviceType,0x10001,4 ; FILE_DEVICE_CONTROLLER ;;~HKR,,DeviceCharacteristics,0x10001,0x100 ; Use same security checks on relative opens ;;~[HDC_Class] ;;~HKR,,,,%HDCClassName% ;;~HKR,,Icon,,"-9" ;;~HKR,,Installer32,,"SysSetup.Dll,HdcClassInstaller" ;;~HKR,,TroubleShooter-0,,"tshoot.chm,hdw_drives.htm" ;;~HKR,,DeviceType,0x10001,4 ; FILE_DEVICE_CONTROLLER ;;~HKR,,DeviceCharacteristics,0x10001,0x100 ; Use same security checks on relative opens ;----------------------------------------------- ;;~[ClassInstall] ;;~Addreg=SCSIReg ;;~[SCSIReg] ;;~HKR,,,,%SCSIClassName% ;;~HKR,,EnumPropPages,,"iosclass.dll,SCSIEnumPropPages" ;;~HKR,,Icon,,-10 ;_______________________________________________ [DestinationDirs] DefaultDestDir = 12 ; DIRID_DRIVERS [Manufacturer] %SONY%=SONY [SONY] %NinjaATA.DeviceDesc% = NinjaATA_Inst, PCMCIA\_-NINJAATA--3768 ;=============================================== [NinjaATA_Inst.NTx86] CopyFiles = @va16w2.sys [NinjaATA_Inst.NTx86.Services] AddService = va16w2, %SPSVCINST_ASSOCSERVICE%, NinjaATA_Service_Inst, Miniport_EventLog_Inst ;[NinjaATA_Inst.LogConfigOverride] ;LogConfig = NinjaATA_Inst.LogConfig0 ;;~[NinjaATA_Inst.LogConfig0] ;;~ConfigPriority=NORMAL ;;~IOConfig=180-187,386-387 ;;~IRQConfig=3,5,7,9,10,11 ;;~PcCardConfig=21:0:0(W) [NinjaATA_Service_Inst] ServiceType = %SERVICE_KERNEL_DRIVER% StartType = %SERVICE_BOOT_START% ErrorControl = %SERVICE_ERROR_NORMAL% ServiceBinary = %12%\va16w2.sys LoadOrderGroup = SCSI Miniport AddReg = pnpsafe_pcmcia_addreg ;AddReg = pnpsafe_isa_addreg ;;~[pnpsafe_isa_addreg] ;;~HKR, "Parameters\PnpInterface", "1", 0x00010001, 0x00000001 [pnpsafe_pcmcia_addreg] ; isa with no legacy detection HKR, "Parameters\PnpInterface", "1", 0x00010001, 0x00000011 ;The EventLog entries are the same for all SCSI miniports. [Miniport_EventLog_Inst] AddReg = Miniport_EventLog_AddReg [Miniport_EventLog_AddReg] HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll" HKR,,TypesSupported,%REG_DWORD%,7 ;HKLM,%DataBase%,"Driver",,"VA16W2" ;HKLM,%DataBase%,"DeviceType",,"SCSI" ;----------------------------------------------- [NinjaATA_Inst] CopyFiles=@va16.mpd AddReg=IOS,WBATAPI_Reg ;;~UpdateCfgSys=DOS_NJATA [WBATAPI_Reg] HKR,,PortDriver,,va16.mpd ;;~[NinjaATA_Inst.det] ;;~addreg=ForceMPCopy [NinjaATA_Inst.HW] AddReg=Argumentreg [Argumentreg] HKR,,AdapterSettings,,"" ;;~[DOS_NJATA] ;;~DevDelete=VA16CLI.SYS ;;~DevDelete=VA16365.SYS ;;~DevDelete=VA16CD.SYS [IOS] HKR,,DevLoader,,*IOS HKR,,DontLoadIfConflict,,Y ;;~[ForceMPCopy] ;;~HKR,,NoSetupUI,,1 [SourceDisksFiles] va16w2.sys=1 va16.mpd=1 [SourceDisksNames] 1="Sony 16bit ATA Interface PC Card Driver Disk",,, ;________________________________________________ [Strings] SONY = "Sony Corporation" ;;~SCSIClassName="SCSI and RAID controllers" ;;~HDCClassName= "IDE ATA/ATAPI controllers" ;;~DataBase = "SYSTEM\CurrentControlSet\Services\Pcmcia\DataBase\ \NinjaATA-" NinjaATA.DeviceDesc = "Sony 16bit ATA Interface PC Card" ;Handy macro substitutions (non-localizable) SPSVCINST_ASSOCSERVICE = 0x00000002 SERVICE_KERNEL_DRIVER = 1 SERVICE_BOOT_START = 0 SERVICE_ERROR_NORMAL = 1 REG_EXPAND_SZ = 0x00020000 REG_DWORD = 0x00010001Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.