***************************************************************************** * SMC Networks, Inc. * * SMC EZ Card 10/100 (SMC1244TX V2) * * NDIS/3/4 Driver for Windows NT 3.51/4.0 * * * * Copyright (C) 2002 SMC Networks, Inc. * * All Rights Reserved. * ***************************************************************************** They are used with Microsoft Windows NT Release 3.51 or 4.0 on the X86 platform. The driver named FastNIC conforms to the Network Driver Interface Specification (NDIS) 3.0 & 4.0. Contents: --------- A) Installing driver on Microsoft Windows NT 3.51 B) Installing driver on Microsoft Windows NT 4.0 A) Installing driver on Microsoft Windows NT 3.51 ============================================== 1. From the Main group of NT, choose the Control Panel icon. 2. From the Control Panel window, choose the Network icon. 3. From the Network Settings dialog box, choose the Add Adapter button. The Add Network Adapter dialog box appears. 4. From the list of network cards, select "<other> Requires disk from manufacturer", and then press <Enter> button. 5. Insert this driver disk in drive A, enter drive and pathname A:\ and then choose the OK button. 6. In the Select OEM Option dialog box, you will see the following products in the menu, select the exact product and use the OK button to install it. SMC EZ Card 10/100 (SMC1244TX V2) 7. And then SMC EZ Card 10/100 (SMC1244TX V2) Setup dialog box appear, you must specify "Media Type" of the adapter plugged in your PC. Because netcard detection function does not support in SETUP program, please make sure these settings match your adapter's configuration. Otherwise the network ability of Windows NT can not work properly. The connection types for FastNIC Adapter are -------------------------------------------- AutoSense ; performs automatic media ; detection during driver ; initialization. 10BaseT ; RJ-45 connector, line speed is ; 10 Mega bits per second. 10BaseT Full_Duplex ; communication in full duplex mode, ; speed is 20Mbps. 100BaseTx ; RJ-45 connector, line speed is ; 100 Mega bits per second. 100BaseTx Full_Duplex ; communication in full duplex mode, ; speed is 200Mbps. 8. After that, installation is completed. PCI adapter becomes one of the Installed Adapter Cards and the driver becomes one of the Installed Network Software. You can see: "[x]SMC EZ Card 10/100 (SMC1244TX V2)" within the Installed Adapter Cards menu and "SMC EZ Card 10/100 (SMC1244TX V2) Driver" within the Installed Network Software menu. 9. Now, the SETUP program has already copied FastNIC.SY_ from the A:\WINNT directory to C:\WINNT\SYSTEM32\DRIVERS\FastNIC.SYS and the OEMSETUP.INF from A:\WINNT to C:\WINNT\SYSTEM32 but renamed it to another installation information file (like OEMNAD??.INF). NOTICE!! C:\WINNT is the directory where your NT O.S. is located. 10. To complete network installation, remember to bind the adapter to transport drivers by choosing the "Bindings" button under the Network Setting dialog box. 11. After restarting your system, you will acquire network service. B) Installing driver on Microsoft Windows NT 4.0 ============================================= 1. Click the "Start" command button, select the "Settings" icon to display an option list under it. 2. Click the "Control Panel" icon. 3. Double-click the "Network" icon. 4. Select the "Adapters" item, then click the "Add..." button in the "Network" dialog box. 5. Click the "Have Disk..." button in the "Select Network Adapter" dialog box. 6. Insert the Driver Diskette in your floppy drive. Enter the full pathname A:\ of the driver installation information file (OEMSETNT.INF) in the "Insert Disk" dialog box, then click the OK button. 7. Select "SMC EZ Card 10/100 (SMC1244TX V2)", then click the OK button in the "Select OEM Option" dialog box. 8. And then SMC EZ Card 10/100 (SMC1244TX V2) Setup dialog box appear, you must specify "Media Type" of the adapter plugged in your PC. Because netcard detection function does not support in SETUP program, please make sure these settings match your adapter's configuration. Otherwise the network ability of Windows NT can not work properly. The connection types for FastNIC Adapter are -------------------------------------------- AutoSense ; performs automatic media ; detection during driver ; initialization. 10BaseT ; RJ-45 connector, line speed is ; 10 Mega bits per second. 10BaseT Full_Duplex ; communication in full duplex mode, ; speed is 20Mbps. 100BaseTx ; RJ-45 connector, line speed is ; 100 Mega bits per second. 100BaseTx Full_Duplex ; communication in full duplex mode, ; speed is 200Mbps. 9. To complete network installation, remember to bind the adapter to the transport drivers by choosing the "Bindings" button from the "Network" dialog box. 10. Click the "Close" button in the "Network" dialog box. 11. Remove the Driver Diskette from your floppy drive. 12. Restart your computer to initialize the network function. Trademarks: Microsoft Windows NT is a trademark of Microsoft Corporation.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.