NWPA Update Package Installation Instructions for NetWare v4.11
1. From the website at http://developer.novell.com/devres/sas/certinfo.htm
download NWPA_UP.EXE from the "Download the Update Package" link.
2. Install DOS and the CD-ROM driver on the target server machine.
3. Create the directory C:\UPDATE, then change to that directory.
4. Copy NWPA_UP.EXE to C:\UPDATE.
5. Execute NWPA_UP.EXE in the C:\UPDATE directory.
6. Delete NBI31X.NLM, NWTAPE.CDM, and NWTAPE.DDI.
*** For new NetWare v4.11 servers:
Note:If your server already had NetWare v4.11 installed, jump to step 7
of the next section "For currently installed NetWare v4.11 servers."
7. Change directory to the D:\ directory on the CD-ROM drive, if its drive
letter is D:
8. Enter install at the DOS command line. Proceed through the installation of
NetWare v4.11 as usual.
** When prompted by Install to select a device driver to load, select it to
Ultra66 driver.
** Swith to console mode by using <ALT><ESC> before contining installation,
and type "load c:\update\IDEHD.CDM". Do this is to make sure that the idehd.cdm is
version 2.00(1998-8-5) or newer.(The older default IDEHD.CDM doesn't support
LBA mode addressing,and will have problems with Ultra66 driver.)
9. After IDEHD.CDM is loaded, use <ALT><ESC> to switch to the installation monitor,and proceed through the installation of NetWare v4.11 as usual. When the installation program prompts you to edit STARTUP.NCF, enter the following lines after any set parameters but before any file loading, then save the file:
load c:\update\nwpa
load c:\update\nbi
load c:\update\idehd.cdm
10. Remove the NetWare CD-ROM.
11. DOWN and EXIT the server.
12. Reboot the server.
*** For currently installed NetWare v4.11 servers:
7. Edit STARTUP.NCF and add the following lines after any set parameters
but before any file loading:
load c:\update\nwpa
load c:\update\nbi
load c:\update\idehd.cdm
Also add subsequent line "load Ultra66" to load the
Ultra66.HAM driver.
8. Boot the server
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.