CNT32DOS.TXT Driver File Contents (1050460638320LNIC_10_100B_driver_020617.zip)

            VIA VT6105 Rhine III Fast Ethernet Adapter Installation
                         for NetWare Client 32 for DOS

Introduction:
=============
  This document shows you how to setup the driver and how to use the enhanced
  functions by setting the custom keywords.


Installation:
=============
  Before starting with the installation process, make sure that the adapter
  is properly installed and configured. You can use the diagnostic program
  in DOS mode to make sure your connection with the network is correct.

  Install Driver While setting up your Client32:
  ----------------------------------------------
    While you are installing Client32 programs, please have this driver disk
    of the adapter near you.

    1. When the Installation program ask you to specify a lan driver, please
       select "OTHER DRIVERS" or "User Supplied Driver" to install driver from
       the diskette that come with your lan adapter.

    2. Insert the driver diskette into drive A, and specify the
       path of the driver to copy the driver files to your system.

    3. A STARTNET.BAT file will be generated in the Client32 directory.
       (\NOVELL\CLIENT32 or other if you change the default path)

    4. When all the Clinet32 programs installation is completed, reboot
       your PC.

  System with existing Netware client programs:
  ---------------------------------------------
    If there are Client32 programs installed in your system already, you can
    use the following procedures to setup your driver.
    1. Add a Load driver command line to your STARTNET.BAT file in your
       Client32 directory. For example:

          LOAD C:\NOVELL\CLIENT32\FETNWSRV.LAN FRAME=Ethernet_802.2

       The following is a sample of the STARTNET.BAT file:

          SET NWLANGUAGE=ENGLISH
          C:\NOVELL\CLIENT32\NIOS.EXE
          LOAD C:\NOVELL\CLIENT32\LSLC32.NLM
          LOAD C:\NOVELL\CLIENT32\CMSM.NLM
          LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM
          LOAD C:\NOVELL\CLIENT32\FETNWSRV.LAN FRAME=Ethernet_802.2
          LOAD C:\NOVELL\CLIENT32\FETNWSRV.LAN FRAME=Ethernet_802.3
          LOAD C:\NOVELL\CLIENT32\IPX.NLM
          LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM


    2. Execute STARTNET.BAT to connect to Server.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 1.01