1. Dell_Golden_Disc.zip Driver
2. readme.txt File Contents

readme.txt Driver File Contents (Dell_Golden_Disc.zip)

Gemplus CCID Smart card reader drivers for RedHat WS 3.0.for x86 processor architecture
Version 1.0.0, August 2004.

Before proceeding, you might want to check whether a
new driver version is available from http://support.gemplus.com


Contents:
---------

   0. License
   1. Description
   2. Installation
   3. Release notes
   4. Support

0. License
--------------

All included programs are free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 2 of the License, or (at your
option) any later version.

All included programs are distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software Foundation,
Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA


1. Description
--------------
  This archive contains RPM packages of the CCID device driver for the Gemplus CCID based devices, the PCSC-Lite daemon and the libusb v0.1.8.

          The libusb:
            * libusb-0.1.8-2.1.i386.rpm
            * libusb-debuginfo-0.1.8-2.1.i386.rpm
            * libusb-devel-0.1.8-2.1.i386.rpm

          The CCID device driver:
            * ccid-1.0.0-0.i386.rpm
            * ccid-debuginfo-1.0.0-0.i386.rpm

          The pcsc-lite:
            * pcsc-lite-1.2.9-0.beta5.1.i386.rpm
            * pcsc-lite-debuginfo-1.2.9-0.beta5.1.i386.rpm
            * pcsc-lite-devel-1.2.9-0.beta5.1.i386.rpm
            * pcsc-lite-libs-1.2.9-0.beta5.1.i386.rpm

  This archive contains the sources of the CCID device driver for the Gemplus CCID based devices and the PCSC-Lite daemon.

          The CCID device driver:
            * ccid.tar.gz

          The pcsc-lite:
            * pcsc-lite.tar.gz

  It requires:
    * A RedHat WS 3.0 platform based on a x86 processor architecture,
    * A Gemplus CCID based device

  If you intend to use this driver with a different configuration (such as a non x86 platform), please contact the support at the address indicated at the very end of this document.


2. Installation
-------------------------
  On the RedHat WS 3.0 distribution, firstly, you have to upgrade the libsub components as follow:
   [localhost@localdomain /path] # rpm -U libusb-0.1.8-2.1.i386.rpm libusb-debuginfo-0.1.8-2.1.i386.rpm libusb-devel-0.1.8-2.1.i386.rpm

  Then you can install the pcsc-lite daemon:
   [localhost@localdomain /path] # rpm -i pcsc-lite-1.2.9-0.beta5.1.i386.rpm pcsc-lite-debuginfo-1.2.9-0.beta5.1.i386.rpm pcsc-lite-devel-1.2.9-0.beta5.1.i386.rpm pcsc-lite-libs-1.2.9-0.beta5.1.i386.rpm

  Finally, you can install the CCID driver:
   [localhost@localdomain /path] # rpm -i ccid-1.0.0-0.i386.rpm ccid-debuginfo-1.0.0-0.i386.rpm

  The pcsc-lite daemon will start automatically during the next boot,

  Remark : If necessary you can also start it manually after the installation using the following command :
  [localhost@localdomain /etc/rc.d/init.d] # ./pcscd start

3. Release notes
----------------

  Version 1.0.0:  This is the initial driver version.


4. Support
----------

In case of problem, please contact Gemplus through the Gemplus web site
(http://www.gemplus.com/) or depending on your location :

For North America
        email : HOTLINEUSA@gemplus.com
        tel +1 (877) 436-7233

For ASIA
        email : ASIA.hotline@gemplus.com
        No phone line

For other countries
        email : hotline@gemplus.com
        tel +33 (0) 442 36 50 50

----------------------------------------------------------------------