1. 4401_652.zip Driver
2. release.txt File Contents

release.txt Driver File Contents (4401_652.zip)

                   ============================
                    R E L E A S E    N O T E S
                   ============================

       Broadcom Management Application Programming Interface
          for Windows NT 4.0, Windows 2000, XP 32/64 bit,
                     Win98, Win98SE and WinMe
                         Version 3.0.3

          Copyright (c) 2000 - 2002 Broadcom Corporation
                       All rights reserved.
                          Aug. 27, 2002

CHANGES in v3.0.3
------------------
- Force APIs that depend on BmapiInitDiag() must be issued from the
  same thread that BmapiInitDiag() was called. Please refer to
  "Broadcom Management API.doc" for detail information.

CHANGES in v3.0.2
------------------
- Change ASF community name from 32 bytes to 20 bytes.
- Support 5705 loopback test. Require NDIS driver 3.30 or later.

CHANGES in v3.0.1
------------------
- Fix ClearQuest:
  5040: 5705 fails Control Registers Test in BACS.
  5092: ASF status mismatched when compared between BMAPI and DOS
  Diag.
  5094: ASFIpMon does NOT work with BMAPI v3.0.0.

CHANGES in v3.0.0
------------------
- Add BmapiGetBRCMNicInfoEx().
- Add BmapiGetLastDiagPort().
- Add BmapiWriteFirmwareInfo().
- Modify BM_FW_MEDIA_MANUFACT_REGION.
- Modify BM_ASF_TABLE and BM_ASF_MISC.
- Modify BM_BRCM_ADAPTER_INFO_EX.
- Add support for 5705.
- Add support for 'port swap' for 5704.
- Fix ClearQuest:
  4752: ASF Config fails to enable ASF for 2nd port of b5704A0
  LOM.
  4804: Cannot get Vital Sign information for 5701 &5703-Fiber when
  the driver is loaded and the adapter is enabled.
  4920: 5702: Reverse N-Way NIC will lose connection after running
  diagnostics in BACS  

CHANGES in v2.2.23
------------------
- Add BmapiGetPowerMode().
- Add BmapiSetPowerMode().
- Require miniport driver version 3.18.

CHANGES in v2.2.22
------------------
- Add BmapiGetIpAddrInfo().
- Add BmapiTestNetwork().
- Add 4401 support in BmapiForceBRCMNicLinkSpeed().
- Add 5704 support for ASF.

CHANGES in v2.2.21
------------------
- Fix ClearQuest:
  4073: 5704 Fails PHY LoopBack test on BACS v2.31.

CHANGES in v2.2.20
------------------
- Fix ClearQuest:
  3938: After disabling our NIC, launching BACS causes system to
  blue screen.

CHANGES in v2.2.19
------------------
- Add BmapiReadNicMem().
- Add BmapiWriteNicMem().
- Change BmapiTestEEPROM() to work with driver version eariler than
  2.56.

CHANGES in v2.2.18
------------------
- Fix ClearQuest:
  2799: Gigabit Transmit & Gigabit Receive LED in Vital Signs
  intermittently turns on and off

CHANGES in v2.2.17
------------------
- Fix ClearQuest:
  3666: BASP 3.0.7 fails to create identical teams using 3rd vendor
  cards

CHANGES in v2.2.16
------------------
- Add BmapiGetBrcmVirNic().
- Support BASP on NT 4.0 workstation, W2k Professional ans XP
  professional.

CHANGES in v2.2.15
------------------
- Eliminate possible EEPROM corruption on 5702/5703 A0/A1 rev caused
  by applications.
- Require network adapter driver version 2.63 or later.

CHANGES in v2.2.14
------------------
- Fix ClearQuest:
  3281: 4401 Broadcom Control Suite Failure during MAC-Loopback Test
        Require 4401 miniport driver v3.20 or later.

CHANGES in v2.2.13
------------------
- Support WMI on Windows 98SE, windows Me, Windows NT4, Windows XP.

CHANGES in v2.2.12
------------------
- Fix the problem that BMAPI can not get IP address information in
  Win 98/Me if network adapters are using DHCP.

CHANGES in v2.2.11
------------------
- Fix the problem that BmapiSetASFTable() writes 16 bytes longer
  than it is supposed to and causing EEPROM corruption.

CHANGES in v2.2.10
------------------
- Enhancement for ASF feature.
- Fix Win 98/Me problem of reporting wrong ASIC revision.

CHANGES in v2.2.9
------------------
- Add BmapiReadFirmware().
- Add support for Broadcom 440x fast ethernet cards.

CHANGES in v2.2.8
------------------
- Add BmapiWriteFirmware().
- Add more data in BM_ADAPTER_INFO_EX.

CHANGES in v2.2.7
------------------
- Modify BM_ASF_CFG structure.

CHANGES in v2.2.6
------------------
- Support 5702/5703 Flash with ASF.
- Add BmapiGetFirmwareInfo().

CHANGES in v2.2.5
------------------
- Support 5702/5703 LOM with SEEPROM.

CHANGES in v2.2.4
------------------
- Improve events delivering implementation.

CHANGES in v2.2.3
------------------
- Support concurrent diagnose for different NIC.
- Applications MUST call BmapiInitDiag() before calling any
  diagnostic functions. Application also MUST call BmapiUnInitDiag()
  after diagnostic is done.
- Support NIC firmware v2.6 for ASF feature.
- Add following APIs:
    BmapiTestControlRegistersEx()
    BmapiTestMIIRegistersEx()
    BmapiTestEEPROMEx()
    BmapiTestInternalMemoryEx()
    BmapiTestInterruptEx()
    BmapiTestLoopBackEx()
    BmapiTestCPUEx()
    BmapiTestLEDsEx()
    BmapiSuspendDriverEx()
    BmapiResumeDriverEx()


CHANGES in v2.2.2
------------------
- Bug fix for ASFConfig.

CHANGES in v2.2.1
------------------
- Support ASFConfig run on NT4.0.

CHANGES in v2.2.0
------------------
- Replace b57dtect.dll with BASFND.sys to access to PCI information.
- Support 802.3AD teaming.

CHANGES in v2.1.5
------------------
- Change from "Broadcom Virtual adapter" to "BASP Virtual Adapter".

CHANGES in v2.1.4
------------------
- Fix Prod00002283, PCI Bus Mode in Vital Sign displayed unknown PCI
  clock speed.

CHANGES in v2.1.3
------------------
- Enhancement in BmapiTestEEPROM().
- Add support for PCI-X 100 MHz.
- Add support for PCI-X 50MHz.

CHANGES in v2.1.2
------------------
- Bug fix in BmapiUninitialize() reported by OEM.

CHANGES in v2.1.1
------------------
- Add support of fiber NICs.

CHANGES in v2.1.0
------------------
- Add support of Win98, WinSe and WinME
- Add two more API BmapiInitDiag() and BmapiUnInitDiag()
- Bug fix in BmapiUninitialize() reported by OEM.

CHANGES in v2.0.1
------------------
- Add version resource to dll.

CHANGES in v1.3.3
------------------
- Support for selective teaming.
- Add new API BmapiGetNicPciInfo().

CHANGES in v1.3.2
------------------
- Add new API BmapiGetNicStatistics64().

CHANGES in v1.3.0
------------------
- When team configuration is changed in Windows 2000, only the
  physical and virtual adapters that are involved in the change may
  need to restart.
- Fix Prod00000980, BASCS - internal error is reported with
  Save/Restore function.
- Add new API BmapiGetHandleByServiceName() and
  BmapiIMOnlineDevice().

CHANGES in v1.2.8
------------------
- Since we never want to support Alteon on 'Advanced Failover'
  feature, the codes for that part are removed.

CHANGES in v1.2.7
------------------
- Fix the problem that SNMP subagent for event trap can not get team
  name and service name of the adapter in event callback.
- Add BmapiRefreshData() to support applications that want to
  refresh BMAPI internal data.

CHANGES in v1.2.6
------------------
- 'extra_info' passed to callback function for registered events 
  will be available only for events BMAPI_EVT_ACTIVE and 
  BMAPI_EVT_INACTIVE.
- Load Balance/Fail Over driver supports only 63 tagged VLANs and
  one optional untagged VLAN.
- Fix intermittent loopback test failed.