release.txt Driver File Contents (5702.zip)

		  ===========================
		  R E L E A S E    N O T E S
		  ===========================

	    Broadcom Gigabit Ethernet DOS/OS2 NDIS2 Driver
			 version 1.10

	    Copyright (c) 2002 Broadcom Corporation
		     All rights reserved.
		       April 29, 2002


04/29/02 - v1.10-
        Drivers allocate system's memory for adapter use to reduce the file size.

04/22/02 - v1.09-
        Removed unused adapter's specific features.

04/19/02 - v1.08- 
        1. Latest LM from ODI16 v1.17 that have following fixes:
            a) DMA once bit with PCI-X
            b) LINK polarity bit for 5703/02.
            c) Removed the runt packet configuration setup.
            d) The PHY ADC Decimator fix.
            e) Additional delays are needed during PCI config B2B access.
            f) 40us delay after GPIO access.
        3. Added PortNum Keyword.
        4. New banner displays other NICS present in the system (up to 8).
        5. Support up to 4 adapters.
        6. Os2 Traps during Fibre Auto-Negotiation.

04/03/02 - v1.07- 
        Removed debug statements conflict with retail OS/2 kernel.

03/27/02 - v1.06- 
        Fixed inconsistent Fibre Auto-Negotiation.

03/25/02 - v1.05- 
	Fixed high data rate Netbeui protocol's flowcontrol, Added Fiber LED control,
        and fixed locked up when cable is disconnected and re-connected during file
        transfer.

03/07/02 - v1.04- 
        Added 16a6, 16a7, 164d device ids. Drivers utilized ODI16 v1.15's LM supports
        nic send bds and wirespeed.

02/25/02 - v1.03- 
        Added LineSpeed, Duplex, and FuncNum keywords.

02/08/02 - v1.02- 
	Fixed BusNum and DevNum keywords to pickup the assigned adapter when there
	are more than one adapter present. Utilized ODI16 v1.14's LM modules.

02/07/02 - v1.01- 
	Add OS2 support. Current drivers does not support any Ax firm ware fixes.

02/06/02 - v1.00- 
	First Engineering Release.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 2.12