;----------------------------------------------------------------------------
; Atheros AR5001 Wireless Network Card
;
; INF file for installing Atheros AR5001 Wireless Network Card
; on Windows NT 4.0
;
;----------------------------------------------------------------------------
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
ISA
EISA
MCA
PCI
[Options]
ATH
[OptionsTextENG]
ATH = "Atheros Wireless Network Adapter"
[AllFileConstants]
GenericInfVersion = "3.1.1.54"
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer = "Atheros Communications, Inc."
CardName = "AR5001-0000-0000"
DISABLEPCMCIASYS = "0" ; "1"
PCIVendorID = 5772 ; 0x168c
; Devices: 0x0011, 0x0012, 0x0013
PCIDeviceIDList = { 17, 18, 19 }
[FileConstants-ATH]
GenericAdapterName = "Atheros Wireless Network Adapter"
GenericTitleName = "Atheros Wireless Network Adapter"
GenericDriverName = "Atheros Wireless Network Driver"
GenericSysName = "AR5211N4.SYS"
GenericName = "AR5211N4"
ProductMajorVersion = "2"
ProductMinorVersion = "10"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "AR5211N4"
ProductSoftwareDesc = "Atheros Wireless Network Adapter"
ProductSoftwarePath = "\SystemRoot\System32\drivers\"$(GenericSysName)
NetRuleSoftwareType = "ar5211n4Sys ndisDriver ar5211n4Driver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """ar5211n4Sys"" yes no container"
NetRuleSoftwareClass = {"ar5211n4Driver basic"}
NetRuleSoftwareBindable = {"ar5211n4Driver ar5211n4Adapter non exclusive 100"}
ProductHardwareName = "AR5211N4"
ProductHardwareDesc = "Atheros Wireless Network Adapter"
NetRuleHardwareType = "AR5211N4 ar5211n4Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"ar5211n4Adapter basic"}
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
VERS1Manufacturer = "Atheros"
VERS1Product = "AR5001 Wireless Network Adapter"
VERS1Type = "AR5001"
PCMCIA = 0
[GeneralConstants]
From = ""
To = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MaximumAllowed = 33554432
RegistryError = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExist = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
DefaultConfigName = "Default"
Nictype = 2
[date]
; Now is a list which contains { Sec From 1-1-1970, Year, Month, Day, Hour,
; Minute, Second }
Now = {} ? $(!LIBHANDLE) GetSystemDate
;---------------------------------------------------------------------------
; 1. Identify
;
; DESCRIPTION: To verify that this INF deals with the same type of options
; as we are choosing currently.
;
; INPUT: None
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL
; $($R1): Option Type (COMPUTER ...)
; $($R2): Diskette description
;---------------------------------------------------------------------------
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
;------------------------------------------------------------------------
; 2. ReturnOptions:
;
; DESCRIPTION: To return the option list supported by this INF and the
; localised text list representing the options.
;
;
; INPUT: $($0): Language used. ( ENG | FRN | ... )
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE
; STATUS_FAILED
; STATUS_NOTSUPPORTED
; $($R1): Option List
; $($R2): Option Text List
;------------------------------------------------------------------------
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == $(KeyNull)
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
;------------------------------------------------------------------------
; InstallOption:
;
; This section is shelled to by main installation processing
; or by NCPASHEL.INF during reconfig, removal, update, etc.
;
; FUNCTION: To copy files representing Options
; To configure the installed option
; To update the registry for the installed option
;
; INPUT: $($0): Language to use
; $($1): OptionID to install
; $($2): SourceDirectory
; $($3): AddCopy (YES | NO)
; $($4): DoCopy (YES | NO)
; $($5): DoConfig (YES | NO)
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE |
; STATUS_USERCANCEL |
; STATUS_FAILED
;------------------------------------------------------------------------
[InstallOption]
set Status = STATUS_FAILED
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
Set !DebugOutputControl = 1
Debug-Output "INF: InstallOption"
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms AllFileConstants
read-syms FileConstants"-"$(Option)
read-syms DialogConstants$(!STF_LANGUAGE)"-"$(Option)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
endif
read-syms AllFileConstants$(!STF_LANGUAGE)
read-syms FileConstants$(!STF_LANGUAGE)"-"$(Option)
detect date
set-title $(FunctionTitle)
set To = Begin
set From = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
Set ActivateDetection = FALSE
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
set StartLabel = configureadapter
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
set From = end
set To = end
goto nonfatalinfo
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
; Set the Default values
set bssTypeValue = "1" ; bssType = AP (Infratructure)
set defaultKeyValue = "0" ; defaultKey = Shared Key 1 (key0)
set uniqKeyLengthValue = "0" ; uniqKeyLength = 40 bits
set keyLength0Value = "0" ; keyLength0 = 40 bits
set keyLength1Value = "0" ; keyLength1 = 40 bits
set keyLength2Value = "0" ; keyLength2 = 40 bits
set keyLength3Value = "0" ; keyLength3 = 40 bits
set MapRegistersValue = "256"
set QoSValue = "0" ; QoS = Disabled
set sleepModeValue = "2" ; sleepMode = Normal Power Save
set AdHocBandValue = "0" ; 11b mode
set AwakeTimePerfValue = "200" ; 200 msec
set beaconIntervalValue = "100" ; 100 msec
set ccodeValue = "US" ; US reg domain
set clistValue = ""
set EncryptionAlgValue = "2" ; Auto
set FragThresholdValue = "2346" ; No Fragmentation
set HwTxRetriesValue = "4" ; # of xmit retries done by hardware
set NetBandValue = "3" ; A + A turbo default
set NetworkAddressValue = ""
set privacyInvokedValue = "0" ; Disabled
set uniqKeyValue = ""
set key0Value = ""
set key1Value = ""
set key2Value = ""
set Key3Value = ""
set rateCtrlEnableValue = "1" ; enable rate control
set RTSThresholdValue = "2346" ; request-to-send disabled
set scanTypeValue = "2" ; use reg domain for scan type
set SsidValue = ""
set SwTxRetryScaleValue = "6" ; 6 xmit s/w reties
set BusNum = 0
set SlotNum = 0
set FunctionNum = 0
set cNetBandValue = 3 ; NCP netband value
Set From = $(fatal)
Set To = $(fatal)
Goto $(StartLabel)
;-----------------------------------------------
; Installation Section
;-----------------------------------------------
installadapter = +
; PCI Support.
; If a device is not found, don't error out => assume it's Cardbus.
Debug-Output "INF: Starting Install"
Debug-Output "INF: Vendor ID = $(PCIVendorID)"
Debug-Output "INF: Device ID List= $(PCIDeviceIDList)"
set AdapterList = {}
ForListDo $(PCIDeviceIDList)
set PCIDeviceID = $($)
Shell $(UtilityInf), GetPCIInformation, $(PCIVendorID) $(PCIDeviceID)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; append all adapters onto the adapter list
ForListDo $($R0)
set AdapterList = >( $(AdapterList), {*($($),1), *($($),2), *($($),3)} )
EndForListDo
EndForListDo
Debug-Output "INF: Adapter List= $(AdapterList)"
ifstr(i) $(AdapterList) != {}
; Only support one PCI adapter
set BusNum = *(*($(AdapterList),1),1)
set SlotNum = *(*($(AdapterList),1),2)
set FunctionNum = *(*($(AdapterList),1),3)
endif
; Check whether the same version of the software exists
;
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MaximumAllowed) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
; Same version already existed in the local machine
; Popup the dialog and ask the user whether he wants to continue
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
; Add a new adapter card?
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
goto end
endif
set OldVersionExist = $(TRUE)
endif
endif
; prompt for media
;
IfStr(i) $(SrcDir) == ""
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
endif
Debug-Output "INF: install control panel"
install "Install-Cpl"
goto adaptersetup
;-----------------------------------------------
; Configuration Section
;-----------------------------------------------
; Confugure the adapter by invoking the NCP
;
configureadapter = +
Debug-Output "INF: configure adapter"
shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" "Configure is not supported, use control panel to do configuration"
goto successful
adaptersetup = +
Set From = adapteroptions
adapteroptions = +
set ENABLER = 0
; If installing, go create the necessary keys;
; if configuring, they're already open
;
skipoptions =+
Debug-Output "INF: skipoptions"
ifint $(OldVersionExist) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
endif
StartWait
; Add Software Component
ifint $(OldVersionExist) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
Debug-Output "INF: install driver"
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
Debug-Output "INF: add software component"
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwarePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
; $R1 contains the product version key handle
; $R2 contains the NetRules subkey handle
; $R3 contains the new Services key handle
; $R4 contains the Parameters key
; $R5 contains the Linkage Key
set RegistryError = $($R0)
set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
Ifstr(i) $(RegistryError) != NO_ERROR
EndWait
Debug-Output "Registry error: add software components"
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDesc)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Debug-Output "INF set product keys"
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryError = $($R0)
Ifstr(i) $(RegistryError) != NO_ERROR
EndWait
Debug-Output "Registry error: add value list."
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Debug-Output "INF set software keys"
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryError = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $(RegistryError) != NO_ERROR
EndWait
Debug-Output "Registry error: add value list."
goto fatalregistry
endif
endif
; Create the HARDWARE\Netcard region and its corresponding service
;
Debug-Output "INF set hardware keys"
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Cannot add hardware component"
goto ShellCodeError
endif
set RegistryError = $($R0)
Ifstr(i) $(RegistryError) != NO_ERROR
EndWait
Debug-Output "Registry error: add hardware component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
; $R1 Registry key variable for HARDWARE\Netcard\(n)
; $R2 Registry key variable for HARDWARE\Netcard\(n)\\NetRules
; $R3 Registry key handle for <service>\Parameters key
; $R4 Adapter number assigned to adapter
; $R5 Service name generated by combining svc name with adapter number
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDesc)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Debug-Output "INF set mfg keys"
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Debug-Output "INF set rule keys"
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryError = $($R0)
Ifstr(i) $(RegistryError) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
goto writeparameters
; REQUIRED: $(KeyParameters) contains service Parameters key handle
;
writeparameters = +
Shell $(UtilityInf), GetBusTypeNum
set BusTypeNum = $($R1)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
; Add the rest of the parameters to the Services area
Debug-Output "INF Create Driver Parameters"
set NewValueList = {{bssType, $(NoTitle),$(!REG_VT_SZ),$(bssTypeValue)},+
{sleepMode, $(NoTitle),$(!REG_VT_SZ),$(sleepModeValue)},+
{defaultKey, $(NoTitle),$(!REG_VT_SZ),$(defaultKeyValue)},+
{uniqKeyLength, $(NoTitle),$(!REG_VT_SZ),$(uniqKeyLengthValue)},+
{keyLength0, $(NoTitle),$(!REG_VT_SZ),$(keyLength0Value)},+
{keyLength1, $(NoTitle),$(!REG_VT_SZ),$(keyLength1Value)},+
{keyLength2, $(NoTitle),$(!REG_VT_SZ),$(keyLength2Value)},+
{keyLength3, $(NoTitle),$(!REG_VT_SZ),$(keyLength3Value)},+
{MapRegisters, $(NoTitle),$(!REG_VT_SZ),$(MapRegistersValue)},+
{QoS, $(NoTitle),$(!REG_VT_SZ),$(QoSValue)},+
{tpc, $(NoTitle),$(!REG_VT_SZ),$(tpcValue)},+
{AdHocBand, $(NoTitle),$(!REG_VT_SZ),$(AdHocBandValue)},+
{AwakeTimePerf, $(NoTitle),$(!REG_VT_SZ),$(AwakeTimePerfValue)},+
{beaconInterval, $(NoTitle),$(!REG_VT_SZ),$(beaconIntervalValue)},+
{ccode, $(NoTitle),$(!REG_VT_SZ),$(ccodeValue)},+
{clist, $(NoTitle),$(!REG_VT_SZ),$(clistValue)},+
{EncryptionAlg, $(NoTitle),$(!REG_VT_SZ),$(EncryptionAlgValue)},+
{FragThreshold, $(NoTitle),$(!REG_VT_SZ),$(FragThresholdValue)},+
{Ssid, $(NoTitle),$(!REG_VT_SZ),$(SsidValue)},+
{NetworkAddress, $(NoTitle),$(!REG_VT_SZ),$(NetworkAddressValue)},+
{uniqKey, $(NoTitle),$(!REG_VT_SZ),$(uniqKeyValue)},+
{key0, $(NoTitle),$(!REG_VT_SZ),$(key0Value)},+
{key1, $(NoTitle),$(!REG_VT_SZ),$(key1Value)},+
{key2, $(NoTitle),$(!REG_VT_SZ),$(key2Value)},+
{key3, $(NoTitle),$(!REG_VT_SZ),$(key3Value)},+
{privacyInvoked, $(NoTitle),$(!REG_VT_SZ),$(privacyInvokedValue)},+
{rateCtrlEnable, $(NoTitle),$(!REG_VT_SZ),$(rateCtrlEnableValue)},+
{RTSThreshold, $(NoTitle),$(!REG_VT_SZ),$(RTSThresholdValue)},+
{scanType, $(NoTitle),$(!REG_VT_SZ),$(scanTypeValue)},+
{HwTxRetries, $(NoTitle),$(!REG_VT_SZ),$(HwTxRetriesValue)},+
{SwTxRetryScale, $(NoTitle),$(!REG_VT_SZ),$(SwTxRetryScaleValue)},+
{BusType, $(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
{SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)},+
{FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)},+
{DriverDesc,$(NoTitle),$(!REG_VT_SZ),$(GenericAdapterName)},+
{AdapterType, $(NoTitle),$(!REG_VT_DWORD),0},+
{PCMCIA, $(NoTitle),$(!REG_VT_DWORD),0},+
{DriverType,$(NoTitle),$(!REG_VT_DWORD),1},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{NwayProtocol,$(NoTitle),$(!REG_VT_DWORD),1},+
{PlatformType,$(NoTitle),$(!REG_VT_DWORD),1}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
; go get the subsystem ID so the correct NIC type can be set
;
; 1.) Call Executable to populate the reg keys with the PCI data for the current instance of the NIC
RunProgram ExitCode "" "" ANTPCIEX.EXE
; 2.) Check open key for the data of interest. *** DeviceID, SubSystemID, SubVendorID, and VendorID are present
GetRegValue $(KeyParameters) "ANTDeviceID" Array_DeviceID
GetRegValue $(KeyParameters) "ANTVendorID" Array_VendorID
GetRegValue $(KeyParameters) "ANTSubSystemID" Array_SubSystemID
GetRegValue $(KeyParameters) "ANTSubVendorID" Array_SubVendorID
Set Value_DeviceID = *($(Array_DeviceID),4)
Set Value_VendorID = *($(Array_VendorID),4)
Set Value_SubSystemID = *($(Array_SubSystemID),4)
Set Value_SubVendorID = *($(Array_SubVendorID),4)
ifint $(Value_DeviceID) == 17 ; 0x11 - MAUI2
Set Nictype = 0
set NetBandValue = "3" ; 11a mode
set cNetBandValue = 3
endif
ifint $(Value_DeviceID) == 18 ; 0x12 - Oahu
ifint $(Value_SubSystemID) == 4129 ; 0x1021 - CB-21
Set Nictype = 0
set NetBandValue = "3" ; 11a mode
set cNetBandValue = 3
endif
ifint $(Value_SubSystemID) == 8225 ; 0x2021 - MB-21
Set Nictype = 2
set NetBandValue = "3" ; 11a mode
set cNetBandValue = 3
endif
ifint $(Value_SubSystemID) == 4130 ; 0x1022 - CB-22
Set Nictype = 1
set NetBandValue = "7" ; 11ab mode
set cNetBandValue = 7
endif
ifint $(Value_SubSystemID) == 8226 ; 0x2022 - MB-22
Set Nictype = 2
set NetBandValue = "7" ; 11ab mode
set cNetBandValue = 7
endif
endif
ifint $(Value_DeviceID) == 19 ; 0x13 - Venice
ifint $(Value_SubSystemID) == 4133 ; 0x1025 - CB-21g
Set Nictype = 1
set NetBandValue = "12" ; 11bg mode
set cNetBandValue = 12
endif
ifint $(Value_SubSystemID) == 8229 ; 0x2025 - CB-21g
Set Nictype = 2
set NetBandValue = "12" ; 11bg mode
set cNetBandValue = 12
endif
ifint $(Value_SubSystemID) == 4134 ; 0x1026 - CB-22ag
Set Nictype = 1
set NetBandValue = "15" ; 11abg mode
set cNetBandValue = 15
endif
ifint $(Value_SubSystemID) == 8230 ; 0x2026 - MB-22ag
Set Nictype = 2
set NetBandValue = "15" ; 11 abg mode
set cNetBandValue = 15
endif
ifint $(Value_SubSystemID) == 4135 ; 0x1027 - CB-22g
Set Nictype = 1
set NetBandValue = "12" ; 11bg mode
set cNetBandValue = 12
endif
ifint $(Value_SubSystemID) == 8231 ; 0x2027 - MB-22g
Set Nictype = 2
set NetBandValue = "12" ; 11bg mode
set cNetBandValue = 12
endif
ifint $(Value_SubSystemID) == 4144 ; 0x1030 - CB-31
Set Nictype = 1
set NetBandValue = "12" ; 11bg mode
set cNetBandValue = 12
endif
ifint $(Value_SubSystemID) == 8240 ; 0x2030 - MB-31
Set Nictype = 2
set NetBandValue = "12" ; 11bg mode
set cNetBandValue = 12
endif
ifint $(Value_SubSystemID) == 4145 ; 0x1031 - CB-32
Set Nictype = 1
set NetBandValue = "15" ; 11ag mode
set cNetBandValue = 15
endif
ifint $(Value_SubSystemID) == 8241 ; 0x2031 - MB-32
Set Nictype = 2
set NetBandValue = "15" ; 11ag mode
set cNetBandValue = 15
endif
ifint $(Value_SubSystemID) == 4161 ; 0x1041 - CB-41
Set Nictype = 1
set NetBandValue = "12" ; 11bg mode
set cNetBandValue = 12
endif
ifint $(Value_SubSystemID) == 8257 ; 0x2041 - MB-41
Set Nictype = 2
set NetBandValue = "12" ; 11bg mode
set cNetBandValue = 12
endif
ifint $(Value_SubSystemID) == 4162 ; 0x1042 - CB-42
Set Nictype = 1
set NetBandValue = "15" ; 11ag mode
set cNetBandValue = 15
endif
ifint $(Value_SubSystemID) == 8258 ; 0x2042 - MB-42
Set Nictype = 2
set NetBandValue = "15" ; 11abg mode
set cNetBandValue = 15
endif
endif
; now write the driver's wireless mode key
;
SetRegValue $(KeyParameters) {"NetBand", 0,$(!REG_VT_SZ),$(NetBandValue)}
; add parameters below the driver list
;
set CfgParameters = "CustomParams\Configurations"
CreateRegKey $(KeyParameters) {$(CfgParameters),0,GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" MyCfgParmHandle
CloseRegKey $(KeyParameters)
ifstr $(MyCfgParmHandle) == $(KeyNull)
shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" "ConfigParm registry create failed. Could not create key:"$($)" ("$(RegLastError)")"
goto successful
endif
set NewValueList = {{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion, $(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{NicType, $(NoTitle),$(!REG_VT_DWORD),$(Nictype)},+
{SelectedConfigurationIndex,$(NoTitle),$(!REG_VT_DWORD),0},+
{SelectedConfigurationName,$(NoTitle),$(!REG_VT_SZ),$(DefaultConfigName)}}
Shell $(UtilityInf), AddValueList, $(MyCfgParmHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
CloseRegKey $(MyCfgParmHandle)
goto ShellCodeError
endif
ifint $(DISABLEPCMCIASYS) == 1
set PCMCIAKeyName = $(!NTN_ServiceBase)"\Pcmcia"
OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIAKeyName) $(MaximumAllowed) PCMCIAKey
SetRegValue $(PCMCIAKey) {Start, 0, $(!REG_VT_DWORD),4} ; '4' disables the driver
CloseRegKey $(PCMCIAKey)
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryError = $($R0)
Ifstr(i) $(RegistryError) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
EndWait
; ----------------------------------------------------------------------------------------------------------
; add driver info to the SYSTEM\CurrentControlSet\Services\resman\Database\Atheros for CardWizard
; ----------------------------------------------------------------------------------------------------------
set CWKey = "SYSTEM\CurrentControlSet\Services\resman"
set CWDatabaseKey = $(CWKey)"\Database"
set CWManufacturerKey = $(CWDatabaseKey)"\"$(Manufacturer)
set CWCardNameKey = $(CWManufacturerKey)"\"$(CardName)
Debug-Output "INF Check the presence of CardWizard"
OpenRegKey $(!REG_H_LOCAL) "" $(CWKey) $(MaximumAllowed) MyPcmciaHandle
Ifstr $(MyPcmciaHandle) == $(KeyNull)
goto successful
endif
Debug-Output "INF Create Registry Keys for CardWizard"
OpenRegKey $(!REG_H_LOCAL) "" $(CWCardNameKey) $(MaximumAllowed) MyPcmciaHandle
Ifstr $(MyPcmciaHandle) == $(KeyNull)
Debug-Output "INF: Create Registry Keys (for CardName)"
OpenRegKey $(!REG_H_LOCAL) "" $(CWDatabaseKey) $(MaximumAllowed) MyPcmciaKey
CreateRegKey $(MyPcmciaKey) {$(Manufacturer),0,GenericClass} "" $(MaximumAllowed) "" MyPcmcialHandle
CloseRegKey $(MyPcmciaKey)
OpenRegKey $(!REG_H_LOCAL) "" $(CWManufacturerKey) $(MaximumAllowed) MyPcmciaKey
CreateRegKey $(MyPcmciaKey) {$(CardName),0,GenericClass} "" $(MaximumAllowed) "" MyPcmcialHandle
CloseRegKey $(MyPcmciaKey)
OpenRegKey $(!REG_H_LOCAL) "" $(CWCardNameKey) $(MaximumAllowed) MyPcmciaHandle
endif
set NewValueList = {{Driver,$(NoTitle),$(!REG_VT_SZ),$(GenericName)}}
Shell $(UtilityInf), AddValueList, $(MyPcmciaHandle), $(NewValueList)
Debug-Output "<DBG> AddValueList - Driver:REG_SZ:"$(CardName)
CloseRegKey $(MyPcmciaHandle)
goto successful
;-----------------------------------------------
; Binding section
;-----------------------------------------------
bindingadapter =+
Debug-Output "INF - binding not suppported"
set Error = "Binding: Sorry, not yet implemented."
goto fatal
;-----------------------------------------------
; Removeadapter section
;-----------------------------------------------
removeadapter = +
Debug-Output "INF - remove adapter"
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
; Remove Software Component
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryError = $($R0)
Ifstr(i) $(RegistryError) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryError = $($R0)
Ifstr(i) $(RegistryError) != NO_ERROR
goto fatalregistry
endif
endif
ifint $(DISABLEPCMCIASYS) == 1
set PCMCIAKeyName = $(!NTN_ServiceBase)"\Pcmcia"
OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIAKeyName) $(MaximumAllowed) PCMCIAKey
SetRegValue $(PCMCIAKey) {Start, 0, $(!REG_VT_DWORD),0} ; '0' restores the driver to "BOOT"
CloseRegKey $(PCMCIAKey)
endif
goto end
;-----------------------------------------------
; Upgrade Software section
;-----------------------------------------------
UpgradeSoftware = +
; Update Software\ManufacturerName\ProductName\CurrentVersion and
; install new drivers and INF
Debug-Output "INF - upgrade"
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MaximumAllowed) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = $($R0)
ifstr(i) $(!UG_Filename) != ""
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
endif
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
CloseRegKey $(KeyProduct)
else
goto fatalregistry
endif
goto end
successful = +
goto end
abandon = +
Debug-Output "INF adandon"
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryError = $($R0)
Ifstr(i) $(RegistryError) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryError = $($R0)
Ifstr(i) $(RegistryError) != NO_ERROR
goto fatalregistry
endif
endif
goto end
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(From)
else
goto "end"
endif
nonfatalinfo = +
Set Severity = STATUS
Set CommonStatus = STATUS_USERCANCEL
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(From)
else
goto "end"
endif
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryError)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[DebugConfiguration]
Set InfName = "OEMSETUP.INF"
return
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Cpl $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Install-Cpl]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-Cpl $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Source Media Descriptions]
1 = "Atheros Setup Disk for NT"
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
1, OEMSETUP.INF, SIZE=58000, RENAME=$(!UG_Filename)
[Files-Cpl]
1, ANTPCIEX.EXE , SIZE=184000
1, ANTPCISY.SYS , SIZE=4000
[Files-ATH]
1, AR5211N4.SYS, SIZE=53000
[LanguagesSupported]
ENG
[AllFileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
[FileConstantsENG-ATH]
FunctionTitle = $(GenericTitleName)" Setup"$(GenericInfVersion)
ProductSoftwareTitle = $(GenericDriverName)
ProductHardwareTitle = $(GenericAdapterName)
[DialogConstantsENG-ATH]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.