README file for ether.exe, a configuration program for software configured NE2000 cards running on a Personal Computer Power Series system with Windows NT: **IMPORTANT** Do not use the firmware (SMS) to configure the NE2000 (also IBM) ethernet cards on a Personal Computer Power Series 440 (Model 6015). Instead: 1) Get the file ether.exe from this directory. 2) Put ether.exe on a floppy disk 3) Boot the Windows NT system to the ARC Bootloader menu 4) Choose the option that says "Run a maintenance program" 5) Run ether.exe from here with the command A:ETHER.EXE OR 1) Put the ethernet card in an Intel-based computer and run the setup program that came with the card.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.