SCO UNIX
Introduction:
-------------
This document describes the procedure to install the SCO UNIX driver
for REALTEK RTL8019 Plug&Play ethernet adapter.
Location of Driver: \SCO\5.X\DRIVER.O
------------------
The following files will be used in this installation:
------------------------------------------------------
driver.o : RTL8019 MDI Driver Program
setup : Transfer dos format to unix format setup program
master : Used by netconfig
system : Used by netconfig
node : Used by netconfig
space.c : Used by netconfig
space.h : Used by netconfig
lkcfg : Used by netconfig
AOF/r2e : Used by netconfig
Installing driver procedure on SCO UNIX :
----------------------------------------
Before you start with the installation process, make sure that the
SCO UNIX system is properly installed. Similarly,your adapter should
also be properly installed in your machine.
1. Login as root user. (On maintenance mode)
2. Put RTL SCO UNIX Driver diskette to floppy A: and use doscp
command to copy the file "setup" for installing RTL SCO UNIX
PnP Driver into UNIX's directories as following :
# cd /
# doscp A:setup /setup
!! if you don't have the directory ,namely, "a:/sco/4.x/." in
the disk, you should modify contents of the setup file in
the floppy. Please check contents of the setup file.
# chmod +x /setup
# ./setup
4. Use netconfig utility
Avaiable options :
# netconfig
The screen will display the following messages, and Select
item (1) to Add a chain :
1) Add a chain
2) Remove a chain
3) Reconfigure an element in a chain
4) Quit
5. After the above option completed, the screen display next option
messages :
Select item (4) : sco_tcp SCO TCP/IP for UNIX
6. When the user completed the above option, then various adapter
drivers in SCO UNIX occur and select " RTL PnP Family Ethernet
Driver board 0" item.
7. Add chain sco_tcp -> pnp0 (y/n), TYPE 'y'
8. Enter the internet Address of this interface ,
for example : 192.9.9.1
9. Enter the netmask for this interface (default 255.255.255.0).
10. Does the interface use a broadcast address of all 1's (y/n),
default : y
11. Enter the boardcast address for this interface,
default : xxx.xx.x.255 press ENTER
12. Are these values correct ? (y/n) TYPE 'y'
13. Pseudo ttys are currently configured, do you want to:
1) Add Pseudo ttys
2) Remove Pseudo ttys
Select an option or enter q to quit [q] TYPE 'q'
14. Available options:
1) Add a chain
2) Remove a chain
3) Reconfigure a element in a chain
q. Quit
Select option: q
15. Do you want to relink to kernel now ? y
16. Do you want this kernel to boot by default (y/n) y
17. Do you want the kernel environment rebuilt (y/n) y
18. Reboot unix
# shutdown -g0
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.