Netware Client32 Driver Introduction: ------------- This document describes the procedure to install the NetWare Client32 driver for REALTEK RTL8019 Plug&Play ethernet adapter. Location of Driver: \CLIENT32\PNPSRV.LAN Sample Configuration Files: --------------------------- STARTNET.BAT (Client 32 for DOS will contain): SET NWLANGUAGE=English C:\NOVELL\CLIENT32\NIOS.EXE LOAD C:\NOVELL\CLIENT32\LSLC32.NLM LOAD C:\NOVELL\CLIENT32\CMSM.NLM LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM LOAD C:\NOVELL\CLIENT32\PNPSRV.LAN FRAME=ETHERNET_802.2 LOAD C:\NOVELL\CLIENT32\PNPSRV.LAN FRAME=Ethernet_802.3 LOAD C:\NOVELL\CLIENT32\PNPSRV.LAN FRAME=Ethernet_II LOAD C:\NOVELL\CLIENT32\PNPSRV.LAN FRAME=Ethernet_SNAP A. Driver Installation Procedures on Clien32 for DOS : ------------------------------------------------------ 1.If you have completed installed the Netware Client 32 for DOS, all you have to do is to modify STARTNET.BAT. Please see the sample STARTNET.BAT above. If not, Please follow the next step 2 - step 7. 2.Run INSTALL.EXE from Netware Client 32 for DOS diskette 1 (or from Netware 4.11 CD). When the product manual appears, mark the "Netware Client 32 for DOS" item, then press <Enter>. 3.Select "OTHER DRIVERS" item from "32-bit Network Board Drivers" menu, then press <Enter>. 4.Insert Realtek RTL8019 Driver Diskette, then specify the driver path like A: 5.Select "Realtek RTL8019 ISA driver", then press <Enter>. 6.Following instructions to complete the Client32 for DOS software installation. 7.Reboot your machine. Installation Notes: ------------------- * Installing Multiple LAN Adapters: The keyword "EtherID" is the ethernet address of a adapter. This keyword is provided for multiple LAN adapters in a single server by the driver PNPSRV.LAN. So, add EtherID in LOAD commands. For example: C:\NOVELL\CLIENT32\NIOS.EXE LOAD LSLC32.NLM LOAD CMSM.NLM LOAD ETHERTSM.NLM LOAD PNPSRV EtherID=0123456789AB FRAME=Ethernet_802.2 LOAD PNPSRV EtherID=0123456789BC FRAME=Ethernet_802.2 B. Driver Installation Procedures on Client32 for Windows 3.x : --------------------------------------------------------------- Refer to Content A. On step 2, mark "Netware Client 32 for DOS" and "Client 32 for Windows". On step 4, specify the driver path like A:\CLIENT32\PNPSRV.LAN , then following step 3..7 to complete the installation. C. Driver Installation Procedures on Client 32 for Windows 95 : --------------------------------------------------------------- If you have installed the Microsoft Client in your Windows 95 system, you should remove the adapter object & NDIS 2/3 driver of the RTL8019 adapter from the Windows 95 system. If you have installed previously Realtek's RTL8019 NDIS 2/3 driver, you should do the following steps before installing the RTL8019 Client 32 driver. ( Note: If you never pluged Realtek RTL8019 ISA adapter into your PC, Procedure C.1 is not necessary. And you just start from Procedure C.2) C.1 Remove the previously installed adapter object & driver of Realtek RTL8019, if any. ------------------------------------------------------------------- 1. Click the "My Computer" icon in the Main Program Group. 2. Click the "Control Panel" icon from My Computer window. 3. Click the "System" icon from the Control Panel window. 4. Click the "Network adapter" icon from System window. 5. Click the "Realtek RTL8019 PnP Ethernet Adapter" icon from System window. 6. Click <Remove> button, then click <OK> button. 7. Close the opened windows. C.2 Driver Installation on Client 32 for Windows 95 : ----------------------------------------------------- 1. Plug Realtek's RTL8019 adapter into your PC machine. 2. Turn the power on to bootup the Windows 95. 3. Windows 95 will then prompt the "Realtek RTL8019 Ethernet ISA Adapter" in New Hardware Found dialog box. 4. Following instructions to complete the installation, Windows 95 will ask you to keyin the proper path of the following diskette: a. Netware Client 32 for Windows 95 Disk b. Realtek RTL8019 PnP Ethernet ISA Adapter Driver Diskette: Insert RTL8019 Driver Diskette, then, assign the path to A:\Client32 c. Windows 95 CD-ROM Installation Notes: ------------------- * RTL8019 should be setted in jumpless (non-pnp) mode. If setted in pnp mode, Windows 95 system will auto-detect the adapter, then auto-load RTL8019 NDIS3 driver which has been included in OS.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.