1. XPL6000.exe Driver
2. HINT_MM.TXT File Contents

HINT_MM.TXT Driver File Contents (XPL6000.exe)

Congratulations, you have successfully programmed your
Receive Mode to Manual Mode.

If you need to change your Receive Mode to one of the other choices,
you can go through the Desktop Manager to change the default 
mode by following these simple steps:

	1. Start the MultiPASS Desktop Manager.
	2. Select Setup from the menu bar.
	3. Choose Receive Fax from the drop down list.
	4. In the Answer section, select the Receive Mode from the
	    drop down list.
	5. Click OK.

See your User's Manual for details.

In this Receive Mode the MultiPASS L6000 rings for all incoming
calls. If the incoming call is from another fax, you must press
'START/COPY' on your MultiPASS L6000 to receive the document.

When the MultiPASS L6000 rings, you must pick up the
telephone attached to the MultiPASS L6000. If you pick up
another phone attached to the same line but NOT attached
to the unit, the MultiPASS L6000 will continue to ring.

HINT: If you have only one telephone line, the most efficient
way to use your MultiPASS L6000 is to attach a cordless phone.
When the telephone rings, you can pick up the cordless phone
anywhere; you don't need to be near the MultiPASS L6000.
If the call is from a fax, you simply enter a code on the phone
to start the transmission to the MultiPASS L6000.
(This is the remote feature; see your User's Manual for details.)