1. mcuip6000dwin301ea22.exe Driver
2. readme_english.txt File Contents

readme_english.txt Driver File Contents (mcuip6000dwin301ea22.exe)

______________________________________________________________________

              Canon Memory Card Utility Version 3.0.1
                                for
                     Microsoft(R) Windows(R)
                            Instructions
             *** Copyright CANON INC. 2000 - 2006 ***
______________________________________________________________________

- "Microsoft" and "Windows" are either registered trademarks or 
  trademarks of Microsoft Corporation in the U.S. and/or other countries.
- Windows Vista is either a registered trademark or trademark of
  Microsoft Corporation in the United States and/or other countries.
- All other names and brands mentioned here may be trademarks or
  registered trademarks of their respective owners.

----- CONTENTS -----

Before You Get Started
  1. Introduction
  2. Product Contents

Restriction on Use of Memory Card Utility

======================================================================
Before You Get Started
======================================================================

1. Introduction ------------------------------------------------------

  This product is a utility program for Memory Cards used with
  Microsoft Windows Vista TM, Windows XP, Windows 2000,
  Windows Millennium Edition (Windows Me) and Windows 98
  (afterwards called Windows).
  When using a Canon IJ printer with a card slot, this product
  manages files on the inserted Memory Card for Windows programs.
  In addition, image files on a Memory Card can be viewed via
  Easy-PhotoPrint, or saved on a computer easily by simply pressing
  a button on the printer's operation panel.

2. Product Contents --------------------------------------------------

  This product includes the following components.

  Installer (Setup.exe)
    This program installs the Canon Memory Card Utility in
    your computer.

  USB Memory Card Driver
    Windows uses the driver to read and write data on the
    Memory Card in the card slot of the IJ printer
    (Windows Me and Windows 98 only).

  Memory Card Utility
    This utility program ejects a Memory Card in the card slot of
    the IJ printer, displays the contents of the Memory Card and
    starts the USB Memory Card Settings.
    Furthermore, this utility program opens image files on a Memory
    Card via Easy-PhotoPrint, or saves them on a computer.

  USB Memory Card Settings
    Sets the read/write (read-only/write-enabled) attribute of
    the IJ printer card slot.

  Readme (readme.txt)
    This file. It provides important information about the
    Canon Memory Card Utility.
    When you finish installation, select [Start]-[(All) Programs]
    -[Canon Utilities]-[PIXMA iP6000D Memory Card Utility]-[Readme]
    to display the contents of this file.
  
======================================================================
Restriction on Use of Memory Card Utility
======================================================================

The following restrictions are placed on the use of this product.
Pay attention to these restrictions before use.

  Some of the features of this product may not operate properly
  when multiple supported IJ printers are connected to the computer.
  Avoid connecting multiple IJ printers to the computer.

  In the following cases, it may take several seconds to recognize the 
  removable drive. Wait a while without ejecting the Memory Card or 
  disconnecting the USB cable or turning off the printer.
  - When the IJ printer is connected to the computer 
    during direct printing.

  Easy-PhotoPrint 3.0.0 or higher must be installed on your computer
  in order to start the program from the operation panel.

  While the access lamp is flashing (memory card is being accessed),
  do not perform the following operations.
  - Remove the memory card.
  - Disconnect the USB cable.
  - Turn the printer off.

  If many or large images are saved on the memory card, it may take some
  time to start Easy-PhotoPrint or save images using the operation panel.
  In such cases, wait a while until the "Loading..." message disappears.

  When multiple users are logged on via User Switching, the printer's
  Save button and Easy-PhotoPrint start button may not work correctly.
  In such cases, log off all users, then log on only 
  the Memory Card Utility user and try again (Windows Vista only).