Canon Advanced Printing Technology for Canon LBP-800 R1.12 ******************************IMPORTANT!********************************** READ CAREFULLY AND IF YOU DO NOT AGREE TO THE FOLLOWING TERMS, RETURN THE CD-ROM UNUSED TO THE SELLER: This is a legal agreement between you and Canon Inc. ("Canon") and governing your use of the programs stored in the CD-ROM, Printer Driver for Canon Laser Beam Printer (the "Software"). 1. GRANT OF LICENSE Canon grants you a personal, limited and non-exclusive license to install and use only for the use with Canon's Laser Beam Printer contained in the box you purchased (the "Laser Beam Printer") the Software only on a single computer directly or via local area network connected to the Laser Beam Printer (the "Designated Computer"). You may allow other users of other computers connected to the local area network in which your Designated Computer is contained (the "LAN Users") to use the Software, provided that you must assure that all such users shall abide by the terms of this agreement and shall be subject to restrictions and obligations borne by you hereunder. 2. OTHER RESTRICTIONS You may not install or use the Software on any hardware configuration where the Software is accessible from any users other than the LAN Users. You may not assign, sublicense, sell, rent, lease, loan, convey or transfer to any third party, or send or bring the Software out of the country where you originally obtained it to other countries without required authorization of applicable governments, or copy, duplicate, translate or convert to another programming language the Software, except as expressly provided herein. You may not alter, modify, disassemble, decompile or otherwise reverse engineer the Software and you may not have any third party to do so. 3. COPYRIGHT NOTICE You may not modify, remove or delete a copyright notice of Canon and its licensors contained in the Software, including any copy thereof. 4. NO SUPPORT CANON, CANON'S SUBSIDIARIES, THEIR DISTRIBUTORS, DEALERS AND/OR CANON'S LICENSORS ARE NOT RESPONSIBLE FOR MAINTAINING OR HELPING YOU TO USE THE SOFTWARE. NO UPDATES, FIXES OR SUPPORTS WILL BE MADE AVAILABLE FOR THE SOFTWARE. 5. NO WARRANTY AND DISCLAIMER OF INDEMNITY Canon, Canon's subsidiaries, their distributors, dealers and/or Canon's licensors will not guarantee uninterrupted service, or absence or correction of errors. Therefore, the Software is licensed on an "AS IS" basis without warranty of any kind. CANON, CANON'S SUBSIDIARIES, THEIR DISTRIBUTORS, DEALERS AND/OR CANON'S LICENSORS DISCLAIM ALL IMPLIED WARRANTIES, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE. NEITHER CANON, CANON'S SUBSIDIARIES, THEIR DISTRIBUTORS, DEALERS NOR CANON'S LICENSORS ARE LIABLE FOR ANY LOSS OR DAMAGE INCLUDING CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE SUCH AS LOSS OF PROFITS, EXPENSE OR INCONVENIENCE, WHATSOEVER CAUSED BY OR ARISING OUT OF THE SOFTWARE OR THE USE THEREOF. CANON, CANON'S SUBSIDIARIES, THEIR DISTRIBUTORS, DEALERS AND/OR CANON'S LICENSORS SHALL HAVE NO OBLIGATION TO INDEMNIFY YOU AGAINST ANY CLAIM OR SUIT BROUGHT BY ANY THIRD PARTY ALLEGING THAT THE SOFTWARE OR THE USE THEREOF INFRINGES ANY INTELLECTUAL PROPERTY OF SUCH THIRD PARTY. 6. TERM The license granted hereunder is effective upon your acceptance hereof by installing the Software and remains in effect until terminated. You may terminate the license by destroying the Software and all copies thereof, including those as used and/or installed by LAN Users. The license granted hereunder will also terminate if you or other LAN Users fail to comply with any term hereof. Upon termination of the license, in addition to Canon enforcing its respective legal rights, you and LAN Users must then promptly destroy the Software and any copy thereof. 7. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE The Software is a "commercial item," as that term is defined at 48 C.F.R. 2.101 (Oct 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212 (Sept 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.72024 (June 1995), all U.S. Government End Users shall acquire the Software with only those rights set forth herein. 8. SEVERABILITY In the event that any provision hereof is declared or found to be illegal by any court or tribunal of competent jurisdiction, such provision shall be null and void with respect to the jurisdiction of that court or tribunal and all the remaining provisions hereof shall remain in full force and effect. 9. ACKNOWLEDGEMENT BY INSTALLING THE SOFTWARE, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTOOD IT, AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU ALSO AGREE THAT THIS AGREEMENT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN YOU AND CANON CONCERNING THE SUBJECT MATTER HEREOF AND SUPERSEDES ALL PROPOSALS OR PRIOR AGREEMENTS, VERBAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN YOU AND CANON RELATING TO THE SUBJECT MATTER HEREOF. NO AMENDMENT TO THIS AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY AUTHORISED REPRESENTATIVE OF CANON. Do you agree to the above terms? By installing the Software, you are deemed to agree to be bound by the above terms. If you do not agree to the above terms, eject the CD-ROM and return it to the seller. ******************************IMPORTANT!********************************** Thank you for purchasing the Canon Laser Beam Printer LBP-800, with enhanced performance and ease-of-use from the Canon Advanced Printing Technology. We hope that you'll appreciate its exceptional print quality, flexible paper handling, fast printing speed, and trouble-free operation. Your best source of information on this product is the Canon LBP-800 On-Line Help and the Canon LBP-800 On-Line Manuals. This README file has been created to address some very important or specific issues that may be encountered during the use of this product. ================================================================== Contents: 1. Caution for installation 2. Scaling 3. Overlay 4. Halftone 5. Toner Saver 6. Sharing a parallel port with another device 7. ECP settings: Windows 9x 8. Printing On-Line Help: Windows NT4.0/2000 9. Uninstalling network printer that other user connected: Windows NT4.0/2000 10. Restriction on Windows NT4.0/2000 network printer 11. Restarting Windows with a remaining print job: Windows NT4.0/2000 ================================================================== 1. Caution for installation If you have installed a printer driver of R1.02 (Ver.1.00.0.019) or earlier on OS on which a Plug and Play device is installed, you may fail to execute plug and play installation. In this case, you can install the software by taking the following steps. <Installation Procedure> 1)Uninstall the printer driver(s) of R1.02 (Ver.1.00.0.019) or earlier. 2)While you are starting OS, cancel the Plug and Play dialog box, which prompts you to install LBP-800. 3)Install the software by using the [Add Printer] wizard in the [Printers] folder. During this installation, select the latest INF file in the Install From Disk dialog box, which can be open by clicking [Have Disk] in the Add Printer wizard dialog box. 4)To remove unnecessary files, execute "CAPSWEEP.EXE" in the installation media. * "CAPSWEEP.EXE" is located in the following path. - From the driver software CD:(i.e. D:drive is CD-ROM drive) D:/English/CAPSWEEP.EXE - From the location of the downloaded Web version ../disk1/CAPSWEEP.EXE ================================================================== 2. Scaling Some applications may not print correctly when scaling is set at other than 100% by LBP-800 Printer Setup or Properties. In this case, please set its scaling at 100%. If the application has own its scaling function, please set scaling from the application. ================================================================== 3. Overlay Depending on its application, the printout using overlay form may be different from what you expect to be printed. For example, the contents of overlay form beyond the printing area may not be printed unless changing its printing area (or margin) setting. Please try to print it setting its margin as wide as to fit all contents of overlay form in the printable area. ================================================================== 4. Halftone The Halftone settings are valid when printing colored bitmap, area filling, and colored text. However the Smooth setting is only valid when printing colored bitmap. ================================================================== 5. Toner Saver Using Toner Saver mode, the objects filled with some graphic patterns may not be printed as shown on the display. ================================================================== 6. Sharing a parallel port with another device LBP-800 is capable of sharing a parallel port with another device such as a scanner which conforms to the contention management described in DDK (Device Driver Development Kit). When both devices are, however, used simultaneously, this may cause a problem with an operation. ================================================================== 7. ECP settings: Windows 9x Depending on the PC in use, the printout may not come out properly if "ECP with DMA" is used. In such a case, please select "ECP without DMA" or "Standard" in the Port Setting dialog box using the Printer Status Window. If the problem is not resolved by this, you may be able to solve this by changing its BIOS setup (i.e. parallel port mode or parallel port address). ================================================================== 8. Printing On-Line Help: Windows NT4.0/2000 If you want to print the contents of the On-Line Help, start up the [Canon LBP-800 Help] from the Canon CAPT Tools group. ================================================================== 9. Uninstalling network printer that other user connected: Windows NT4.0/2000 When you execute the [Canon LBP-800 Uninstallation] on the PC that other user have already connected to the Canon LBP-800 network printer servers, information of the Canon LBP-800 network printer that other user connected will not be removed. In this case, other user should remove his Canon LBP-800 printer icon before you execute uninstallation. ================================================================== 10. Restriction on Windows NT4.0/2000 network printer When a network printer is installed on Windows NT4.0/2000, even though you change its connection destination to a local port, the printer cannot be used as a local printer. If you need to establish a local printer, you must install a printer driver, selecting a local port. ================================================================== 11. Restarting Windows with a remaining print job: Windows NT4.0/2000 If you need to restart Windows NT4.0/2000 with a remaining LBP-800 print job, first double-click the LBP-800 in the Printers folder and pause the print job. Then restart Windows NT4.0/2000. ================================================================== <END OF README.TXT>Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.