CANON SOFTWARE LICENSE AGREEMENT IMPORTANT! This is a legal agreement ("Agreement") between you and Canon Inc. ("Canon") and governing your use of Canon's software programs including the related manuals or any printed material thereof (the "Software") for certain Canon's copying machines, printers and multifunctional peripherals (the "Products"). READ CAREFULLY AND UNDERSTAND ALL OF THE RIGHTS AND THE SOFTWARE. BY THE ACTION TO INDICATE YOUR ACCEPTANCE OR USING THE SOFTWARE, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO USE THE SOFTWARE. NO REFUND WILL BE MADE BECAUSE THE SOFTWARE WAS PROVIDED TO YOU AT NO CHARGE. 1. GRANT OF LICENSE Canon grants you a personal, limited and non-exclusive license to use ("use" as used herein shall include storing, loading, installing, accessing, executing or displaying) the Software solely for the use with Products only on computers directly or via network connected to the Products (the "Designated Computer"). You may allow other users of other computers connected to your Designated Computer to use the Software, provided that you must assure that all such users shall abide by the terms of this Agreement and shall be subject to restrictions and obligations borne by you hereunder. You may make one copy of the Software solely for a back-up purpose. 2. RESTRICTIONS You shall not use the Software except as expressly granted or permitted herein, and shall not assign, sublicense, sell, rent, lease, loan, convey or transfer to any third party the Software. You shall not alter, translate or convert to another programming language, modify, disassemble, decompile or otherwise reverse engineer the Software and you shall not have any third party to do so. 3. COPYRIGHT NOTICE You shall not modify, remove or delete any copyright notice of Canon or its licensors contained in the Software, including any copy thereof. 4. OWNERSHIP Canon and its licensors retain in all respects the title, ownership and intellectual property rights in and to the Software. Except as expressly provided herein, no license or right, express or implied, is hereby conveyed or granted by Canon to you for any intellectual property of Canon and its licensors. 5. EXPORT RESTRICTION You agree to comply with all export laws and restrictions and regulations of the country involved, and not to export or re-export, directly or indirectly, the Software in violation of any such laws, restrictions and regulations, or without all necessary approvals. 6. NO SUPPORT NEITHER CANON, CANON'S SUBSIDIARIES OR AFFILIATES, THEIR DISTRIBUTORS, OR DEALERS NOR CANON'S LICENSORS ARE RESPONSIBLE FOR MAINTAINING OR HELPING YOU TO USE THE SOFTWARE. NO UPDATES, FIXES OR SUPPORTS WILL BE MADE AVAILABLE FOR THE SOFTWARE. 7. NO WARRANTY AND DISCLAIMER OF INDEMNITY NO WARRANTY THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH YOU. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. SOME STATES OR LEGAL JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR JURISDICTION TO JURISDICTION. NEITHER CANON, CANON'S SUBSIDIARIES OR AFFILIATES, THEIR DISTRIBUTORS, OR DEALERS NOR CANON'S LICENSORS WARRANT THAT THE FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET YOUR REQUIREMENTS OR THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR FREE. NO LIABILITY FOR DAMAGES IN NO EVENT SHALL EITHER CANON, CANON'S SUBSIDIARIES OR AFFILIATES, THEIR DISTRIBUTORS DEALERS OR CANON'S LICENSORS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING WITHOUT LIMITATION, LOSS OF BUSINESS PROFITS, LOSS OF BUSINESS INFORMATION, LOSS OF BUSINESS INTERRUPTION OR OTHER COMPENSATORY, INCIDENTAL OR CONSEQUENTIAL DAMAGES) ARISING OUT OF THE SOFTWARE, USE THEREOF OR INABILITY TO USE THE SOFTWARE EVEN IF EITHER CANON, CANON'S SUBSIDIARIES OR AFFILIATES, THEIR DISTRIBUTORS, DEALERS OR CANON'S LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES OR LEGAL JURISDICTIONS DO NOT ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR PERSONAL INJURY OR DEATH RESULTING FROM NEGLIGENCE ON THE PART OF SELLER, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. RELEASE OF LIABILITY TO THE FULL EXTENT PERMITTED BY APPLICABLE LAW, YOU HEREBY RELEASE CANON, CANON'S SUBSIDIARIES AND AFFILIATES, THEIR DISTRIBUTORS, DEALERS AND CANON'S LICENSORS FROM ANY AND ALL LIABILITY ARISING FROM OR RELATED TO ALL CLAIMS CONCERNING THE SOFTWARE OR ITS USE. 8. TERM This Agreement is effective upon your acceptance hereof by the action to indicate your acceptance or using the Software and remains in effect until terminated. You may terminate this Agreement by destroying the Software including any and all copies thereof. This Agreement shall also terminate if you fail to comply with any terms hereof. Upon termination of this Agreement, in addition to Canon enforcing its respective legal rights, you must then promptly destroy the Software including any and all copies thereof. Notwithstanding the foregoing, Sections 4, and 7 through 11 shall survive any termination of this Agreement. 9. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE The Software is a "commercial item," as that term is defined at 48 C.F.R. 2.101 (October 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212 (September 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S. Government End Users shall acquire the Software with only those rights set forth herein. Manufacturer is Canon Inc./30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan. 10. SEVERABILITY In the event that any section hereof is declared or found to be illegal by any court or tribunal of competent jurisdiction, such section shall be null and void with respect to the jurisdiction of that court or tribunal and all the remaining provisions hereof shall remain in full force and effect. 11. ACKNOWLEDGEMENT BY THE ACTION TO INDICATE YOUR ACCEPTANCE OR USING THE SOFTWARE, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTOOD IT, AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU ALSO AGREE THAT THIS AGREEMENT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN YOU AND CANON CONCERNING THE SUBJECT MATTER HEREOF AND SUPERSEDES ALL PROPOSALS OR PRIOR AGREEMENTS, VERBAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN YOU AND CANON RELATING TO THE SUBJECT MATTER HEREOF. NO AMENDMENT TO THIS AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY AUTHORISED REPRESENTATIVE OF CANON. Should you have any questions concerning this Agreement, or if you desire to contact Canon for any reason, please write to Canon's sales subsidiary or distributor/dealer, serving the country where you obtained the Products. Canon Inc. Supplement =====Canon Advanced Raster Printing System Driver ===== for Microsoft Windows 98/Me Ver. 1.10 Copyright Canon Inc. 2002 All Rights Reserved Trademarks and Notices o ColorGear, FontComposer, FontGallery, MaxiMam, imageCLASS D300, LASERCLASS 500 are registered trademarks of Canon Inc. in Japan. o CARPS, NetSpot, and PageComposer are registered trademarks of Canon Inc. o Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. o Adobe Photoshop, Adobe, Aldus, PageMaker are registered trademarks of Adobe Systems Incorporated. o MICROGRAFX is a registered trademark of Microfax Inc. of North America. o In this document: Microsoft(R) Windows(R) 98 is referred to as "Windows 98". Microsoft(R) Windows(R) Millennium Edition is referred to as "Windows Me". o Other products mentioned herein are registered trademarks of their respective companies. CONTENTS Overview 1. Introduction 2. System Requirements 3. Printer Driver Installation Methods Using the CARPS Printer Driver 1. Print Job Settings 2. Cautions, Limitations, Restrictions Customer Service ===== Overview ===== 1. Introduction Thank you for choosing the Canon CARPS Printer Driver for Microsoft Windows. This printer driver allows you to print documents from any Windows application. This printer driver has the following features: o You can change the printer settings as you like and save them as Profiles. o The Object feature allows you to choose the most appropriate printing mode for your documents simply by choosing the corresponding Object icon. o Before printing your current job, you can preview it using the Preview screen. 2. System Requirements The following hardware and software are recommended for this printer driver: -Software: Microsoft Windows 98/Me -Hardware: Computers that operate on Microsoft Windows 98/Me -Printers: imageCLASS D320/D340 : LASERCLASS 510 Note: o This printer driver cannot be used to print from the machine of any operating system other than the ones described above. 3. Printer Driver Installation Methods The printer driver must be installed in Windows before the printer can output a print job. Follow one of the procedures below to install the printer driver. Note: o Close all other software applications before you install the printer driver. Make sure that no other printer driver is activated. Installing the Printer Driver To install the printer driver using the USB cable: 1) Make sure that the USB cable is disconnected from the computer. (The USB cable will be connected to the computer in 7).) 2) Double-click the "Setup.exe" icon to start the Installer. * In some systems, the "Setup.exe" icon may be labeled as "Setup". 3) When the Wizard opens, click the "Next" button. 4) The LICENSE AGREEMENT appears. After reading through the terms of the license, select "I accept the terms in the license agreement." and click "Next". 5) In the USB connection screen, select the "Install printer driver installer through a USB connection" check box. 6) When the message "Cannot stop installation after starting. Do you want to continue?" appears on the screen, click "Yes" to continue the installation process. 7) When the installation screen is displayed, connect the printer and the computer with the USB cable. Then, the installation starts. To install the printer driver using other connection (other than USB cable): 1) Double-click the "Setup.exe" icon to start the Installer. * In some systems, the "Setup.exe" icon may be labeled as "Setup". 2) When the Wizard opens, click the "Next" button. 3) The LICENSE AGREEMENT appears. After reading through the terms of the license, select "I accept the terms in the license agreement." and click "Next". 4) In the USB connection screen, make sure that the "Install printer driver installer through a USB connection" check box is not marked. * If a USB driver has already been installed in your computer, the USB connection screen does not appear at this point. 5) In the processing selection screen, select the installation method, and then click the "Next" button. This Wizard screen appears only when the same or older version of printer driver has already been installed. If you are installing the printer driver for the first time, go to the next step. 6) From the Port Settings list, select the port to where the printer is connected, then click the "Settings" button. The next dialogue box will be displayed for the port settings. Use Standard Port: for pre-set USB port, etc. Use Network Printer: for printers shared on a network Add Port: to add a new port 7) Enter the name of the printer in the Printer Name text box. If you want to set the printer as the default printer, select "Set as default", and click "Next". 8) Check all the installation settings, then click "Start". 9) After reading the next message, "Unable to cancel setup after setup is started. Are you sure you want to start setup? ", click "Yes" to start the installation. 10) When the installation is finished, a message prompts you to read the Readme.txt file. Click "Yes", then read the Readme.txt file. 11) When the installation is finished, the setup screen opens. Make sure that "Yes, I want to restart my computer now." is selected, then click the "Exit" button. To install the printer driver in the Printers window: 1) On the desktop, click the "Start" button, point to "Settings", then click "Printers" to open the Printers window. 2) Double-click the "Add Printer" icon to start the Add Printer Wizard. Follow the Printer Wizard instructions to complete the installation. 3) When you need to select the name of the printer, select "Have Disk". 4) Select the file source for your operating system, click the "OK" button, or click the "Browse" button and select the name of the printer. Then, select the name of the printer type and click the "Next" button. 5) Depending on your system, select whether to use the current driver or to replace it with the new driver. At this time, you must replace the existing driver. 6) Click the "Finish" button. The printer driver files start to copy. 7) When the installation is finished, restart your computer. Uninstalling the Printer Driver 1) Double-click the "Uninstall.exe" icon. 2) The Uninstaller starts. Select the name of the printer to uninstall, then click "Delete". Note: o If you click the "CleanUp" button, all files related to the printer driver, including files used for other programs and registered information will be deleted. Click the "Remove" button to uninstall the printer driver. ===== Using the CARPS Printer Driver ===== 1. Print Job Settings This printer driver provides you to set various printer settings. Refer to the following procedures when performing printer settings. To perform printer settings from the Printers window: You can change the printer settings from the Printers window. The settings you changed will remain until you change them again. 1) On the desktop, click the "Start" button, point to "Settings", then click "Printers". 2) Double-click the icon of the printer. 3) From the "Printer" menu, select "Properties", then change the printer settings as you like. 4) When you are finished, click the "OK" button. To perform printer settings from the software application: The settings using the following procedure are valid until the software application is closed. 1) In the software application, start the print job. (For example, from the "File" menu select "Print".) 2) In the Print dialog box, select the name of the printer to use, then click the "Properties" button. 3) Change the printer settings as you like. 4) When you are finished, click the "OK" button. Displaying the On-line Help Refer to the Help file for details on how to perform the settings. When you click the "?" mark in the upper right hand corner of a dialog box, and then click an item, an explanation of that item appears. When you click the "Help" button, information about the printer driver appears. 2. Cautions, Limitations, Restrictions Note the following limitations when using the printer driver or printing a document. o For some computers, when a print job is cancelled, the next print job may not be performed correctly because a reset printer signal is not sent from the computer. After canceling a print job, always reset the printer before starting the next print job. ===== Customer Service ===== If you have questions about how to use the software, or if any points are not clear, refer to the contact list in the operating instructions and contact the service center nearest you. You can also find more information about the software on the Canon Home Page (http://www.canon.com/support). ===== NOTHING FOLLOWS =====Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.