1. LC310_CARPSv2.30.exe Driver
2. Readme.txt File Contents

Readme.txt Driver File Contents (LC310_CARPSv2.30.exe)

CANON SOFTWARE LICENSE AGREEMENT

IMPORTANT!

This is a legal agreement ("Agreement") between you and Canon Inc. 
("Canon") and governing your use of Canon's software programs 
including the related manuals or any printed material thereof  
(the "Software") for certain Canon's copying machines, printers and 
multifunctional peripherals (the "Products").

READ CAREFULLY AND UNDERSTAND ALL OF THE RIGHTS AND RESTRICTIONS 
DESCRIBED IN THIS AGREEMENT BEFORE USING THE SOFTWARE. BY THE ACTION 
TO INDICATE YOUR ACCEPTANCE OR USING THE SOFTWARE, YOU AGREE TO BE 
BOUND BY THE TERMS AND CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT 
AGREE TO THE FOLLOWING TERMS AND CONDITIONS OF THIS AGREEMENT, DO 
NOT USE THE SOFTWARE. NO REFUND WILL BE MADE BECAUSE THE SOFTWARE 
WAS PROVIDED TO YOU AT NO CHARGE.


1.  GRANT OF LICENSE
Canon grants you a personal, limited and non-exclusive license to 
use ("use" as used herein shall include storing, loading, 
installing, accessing, executing or displaying) the Software solely 
for the use with Products only on computers directly or via network 
connected to the Products (the "Designated Computer").
You may allow other users of other computers connected to your 
Designated Computer to use the Software, provided that you must 
assure that all such users shall abide by the terms of this 
Agreement and shall be subject to restrictions and obligations borne 
by you hereunder. 

You may make one copy of the Software solely for a back-up purpose.

2.  RESTRICTIONS
You shall not use the Software except as expressly granted or 
permitted herein, and shall not assign, sublicense, sell, rent, 
lease, loan, convey or transfer to any third party the Software.
You shall not alter, translate or convert to another programming 
language, modify, disassemble, decompile or otherwise reverse 
engineer the Software and you shall not have any third party to do 
so.

3.  COPYRIGHT NOTICE
You shall not modify, remove or delete any copyright notice of Canon 
or its licensors contained in the Software, including any copy 
thereof.

4.  OWNERSHIP
Canon and its licensors retain in all respects the title, ownership 
and intellectual property rights in and to the Software.  Except as 
expressly provided herein, no license or right, express or implied, 
is hereby  conveyed or granted by Canon to you for any intellectual 
property of Canon and its licensors.

5.  EXPORT RESTRICTION
You agree to comply with all export laws and restrictions and 
regulations of the country involved, and not to export or re-export, 
directly or indirectly, the Software in violation of any such laws, 
restrictions and regulations, or without all necessary approvals.

6.  NO SUPPORT
NEITHER CANON, CANON'S SUBSIDIARIES OR AFFILIATES, THEIR 
DISTRIBUTORS, OR DEALERS NOR CANON'S LICENSORS ARE RESPONSIBLE FOR 
MAINTAINING OR HELPING YOU TO USE THE SOFTWARE. NO UPDATES, FIXES OR 
SUPPORTS WILL BE MADE AVAILABLE FOR THE SOFTWARE.

7.  NO WARRANTY AND DISCLAIMER OF INDEMNITY
[NO WARRANTY]  THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF 
ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO 
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND 
PERFORMANCE OF THE SOFTWARE IS WITH YOU. SHOULD THE SOFTWARE PROVE 
DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, 
REPAIR OR CORRECTION. SOME STATES OR LEGAL JURISDICTIONS DO NOT 
ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION 
MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS 
AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR 
JURISDICTION TO JURISDICTION.

NEITHER CANON, CANON'S SUBSIDIARIES OR AFFILIATES, THEIR 
DISTRIBUTORS, OR DEALERS NOR CANON'S LICENSORS WARRANT THAT THE 
FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET YOUR REQUIREMENTS OR 
THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR 
FREE.

[NO LIABILITY FOR DAMAGES] IN NO EVENT SHALL EITHER CANON, CANON'S 
SUBSIDIARIES OR AFFILIATES, THEIR DISTRIBUTORS DEALERS OR CANON'S 
LICENSORS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING WITHOUT 
LIMITATION, LOSS OF BUSINESS PROFITS, LOSS OF BUSINESS INFORMATION, 
LOSS OF BUSINESS INTERRUPTION OR OTHER COMPENSATORY, INCIDENTAL OR 
CONSEQUENTIAL DAMAGES) ARISING OUT OF THE SOFTWARE, USE THEREOF OR 
INABILITY TO USE THE SOFTWARE EVEN IF EITHER CANON, CANON'S 
SUBSIDIARIES OR AFFILIATES, THEIR DISTRIBUTORS, DEALERS OR CANON'S 
LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME 
STATES OR LEGAL JURISDICTIONS DO NOT ALLOW THE LIMITATION OR 
EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR 
PERSONAL INJURY OR DEATH RESULTING FROM NEGLIGENCE ON THE PART OF 
SELLER, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

[RELEASE OF LIABILITY] TO THE FULL EXTENT PERMITTED BY APPLICABLE 
LAW, YOU HEREBY RELEASE CANON, CANON'S SUBSIDIARIES AND AFFILIATES, 
THEIR DISTRIBUTORS, DEALERS AND CANON'S LICENSORS FROM ANY AND ALL 
LIABILITY ARISING FROM OR RELATED TO ALL CLAIMS CONCERNING THE 
SOFTWARE OR ITS USE.

8.  TERM
This Agreement is effective upon your acceptance hereof by the 
action to indicate your acceptance or using the Software and remains 
in effect until terminated. You may terminate this Agreement by 
destroying the Software including any and all copies thereof. This 
Agreement shall also terminate if you fail to comply with any terms 
hereof. Upon termination of this Agreement, in addition to Canon 
enforcing its respective legal rights, you must then promptly 
destroy the Software including any and all copies thereof.
Notwithstanding the foregoing, Sections 4, and 7 through 11 shall 
survive any termination of this Agreement.

9.  U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE
The Software is a "commercial item," as that term is defined at 
48 C.F.R. 2.101 (October 1995), consisting of "commercial computer 
software" and "commercial computer software documentation," as such 
terms are used in 48 C.F.R. 12.212 (September 1995). Consistent with 
48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 
(June 1995), all U.S. Government End Users shall acquire the 
Software with only those rights set forth herein. Manufacturer is 
Canon Inc./30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan.

10.  SEVERABILITY
In the event that any section hereof is declared or found to be 
illegal by any court or tribunal of competent jurisdiction, such 
section shall be null and void with respect to the jurisdiction of 
that court or tribunal and all the remaining provisions hereof shall 
remain in full force and effect.

11.  ACKNOWLEDGEMENT
BY THE ACTION TO INDICATE YOUR ACCEPTANCE OR USING THE SOFTWARE, YOU 
ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTOOD IT, AND 
AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU ALSO AGREE THAT 
THIS AGREEMENT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT 
BETWEEN YOU AND CANON CONCERNING THE SUBJECT MATTER HEREOF AND 
SUPERSEDES ALL PROPOSALS OR PRIOR AGREEMENTS, VERBAL OR WRITTEN, AND 
ANY OTHER COMMUNICATIONS BETWEEN YOU AND CANON RELATING TO THE 
SUBJECT MATTER HEREOF. NO AMENDMENT TO THIS AGREEMENT SHALL BE 
EFFECTIVE UNLESS SIGNED BY A DULY AUTHORISED REPRESENTATIVE OF CANON.


Should you have any questions concerning this Agreement, or if you 
desire to contact Canon for any reason, please write to Canon's 
sales subsidiary or distributor/dealer, serving the country where 
you obtained the Products.

Canon Inc.


Supplement

===== Canon CARPS Printer Driver Ver.2.30 =====
for Microsoft Windows 2000/XP 
Copyright Canon Inc. 2005 
All Rights Reserved 


Trademarks and Notices
o Canon is a registered trademark of Canon Inc.
o Microsoft and Windows are registered trademarks of Microsoft 
  Corporation in the United States and/or other countries.
o In this document: Microsoft(R) Windows(R) 2000 is referred to as 
  "Windows 2000." Microsoft(R) Windows(R) XP is referred to as 
  "Windows XP."
o Other products mentioned herein are registered trademarks of their 
  respective companies.


CONTENTS

General Notes
1. Introduction
2. System Requirements
3. Installing and Uninstalling Driver

Application Notes
1.Printing
 1.1. Print Job Settings

Customer Service


                              ===== General Notes =====


1. Introduction

Thank you for choosing the CARPS Printer Driver for Microsoft 
Windows. The CARPS Printer Driver allows you to print documents 
from your computer.


2. System Requirements 

The CARPS Printer Driver can be installed and used in the following 
system environments:

      - Software  : Microsoft Windows 2000 Professional 
                    Microsoft Windows XP Professional/Home Edition 
      - Hardware  : Computers that operate on Microsoft Windows 2000 
                    Professional, 
                    Microsoft Windows XP Professional/Home Edition 
      - LC310/L390/L408S 

Notes:
o The CARPS Printer Driver cannot be used with the machine of any 
  operating system other than the ones described above.
o Some USB hubs may experience problems with CARPS Printer Driver.
  If this happens, connect the machine directly to the USB port on 
  your computer, or change the USB port that the machine is 
  connected to.


3. Installing and Uninstalling Driver


Installing Driver

Before you install the software, be sure to:
o Confirm the machine is not connected to your computer.
o Turn on the machine. (See the Starter Guide.)
o Quit any Windows application running on your computer.

Important:
o Be sure to log on as a member of Administrators. The full control 
  access right is necessary for the installation of the driver.

Note:
o Use of a USB cable 3 m long or less is recommended.


1)  Insert the CD-ROM into your CD-ROM drive. The "LASER CLASS 310 
    CD-ROM Setup" screen appears. 
    * If the "LASER CLASS 310 CD-ROM Setup" screen is not displayed, 
      on the Windows desktop, click "Start" and then "My Computer" 
      (Windows 2000: double-click "My Computer").
      Then open the CD-ROM icon, and double-click "MInst(MInst.exe)."
      If you are installing from a copy saved on a network or hard 
      disk, double-click "MInst(MInst.exe)" in the copy.

2)  Select the type of installation.
    On the "LASER CLASS 310 CD-ROM Setup" screen, click 
    "Easy Installation."

3)  On the "Easy Installation" screen, click "Install."

4)  The License Agreement appears. 
    After reading the License Agreement, click "Yes."

5)  The CARPS Printer Driver Setup Wizard Ver 2.30 appears.
    Click "Next" to proceed.

6)  The license Agreement for the printer driver appears.
    After reading the License Agreement, check "I accept the terms 
    in the license agreement" and click "Next."

7)  Check "Install Printer Driver through a USB Connection" and 
    click "Next."

8)  When prompted, connect the USB cable to the machine and your 
    computer. When you connect the USB cable to the computer, the 
    machine is automatically detected as a new hardware.
    Wait for a while as the software is installed on your computer.

9)  When the installation of the CARPS Printer Driver is finished, 
    click "Exit."

10) On the "Install" screen, click "Next."

11) On the "Installation is Complete" screen, check "Restart 
    Computer Now (Recommended)" and click "Restart."


Uninstalling and Reinstalling the Software

If the driver is not working properly, remove the driver and 
install it again.
Even if you want to reinstall the software, you must still remove 
the currently installed software.

Before you remove the driver, make sure the following:
o You have the installation software available for installation.
o No application is running on your computer.

Important:
o Uninstallation needs to be done by a user with administrator 
  privileges.


Removing the CARPS Printer Driver

1)  Click "Start" on the Windows task bar and select 
    "(All) Programs," then "Canon Printer Uninstaller," click 
    "CARPS Printer Driver Uninstaller Ver.2.0."

2)  When the "Delete Printer" dialog box appears, select the 
    corresponding printer, and then click "Delete."

3)  When the confirmation message dialog box appears, click "Yes."

4)  After finishing the uninstallation, click "Exit."


                       ===== Application Notes =====


1. Printing

 1.1. Print Job Settings

 The CARPS Printer Driver provides you to set various printer 
 settings. Refer to the following procedures when performing printer 
 settings.

 To perform printer settings from the Printers window:
 You can change the printer settings from the Printers window.
 The settings you changed will remain until you change them again.

 1)  On the desktop, click "Start," then click "Printers and Faxes" 
     (in Windows 2000, click "Printers" in "Settings").

 2)  Right-click the "Canon LC310/L390/L408S" icon and select 
     "Properties" from the pop-up menu.

 3)  Change the printer settings as you like.

 4)  When you are finished, click "OK."

 To perform printer settings from the software application:
 The settings using the following procedure are valid until the 
 software application is closed.

 1)  In the software application, start the print job. (For example, 
     select "Print" from the "File" menu.)

 2)  In the Print dialog box, select the name of the printer to use, 
     then click "Properties."

 3)  Change the printer settings as you like.

 4)  When you are finished, click "OK."


 Displaying the On-line Help

 Refer to the Help file for details on how to perform the settings.
 When you click the "?" mark in the upper right hand corner of a 
 dialog box, and then click an item, an explanation of that item 
 appears. When you click "Help," information about the printer 
 driver appears.


                               ===== Customer Service ===== 


If you have questions about how to use the software, or if any 
points are not clear, refer to the contact list in the operating 
instructions and contact the service center nearest you.


                                ===== NOTHING FOLLOWS =====