CANON SOFTWARE LICENSE AGREEMENT
IMPORTANT!
This is a legal agreement ("Agreement") between you and Canon Inc. ("Canon")
and governing your use of Canon's software programs including the related
manuals or any printed material thereof (the "Software") for certain Canon's
copying machines, printers and multifunctional peripherals (the "Products").
READ CAREFULLY AND UNDERSTAND ALL OF THE RIGHTS AND
RESTRICTIONS DESCRIBED IN THIS AGREEMENT BEFORE USING THE
SOFTWARE. BY THE ACTION TO INDICATE YOUR ACCEPTANCE OR
USING THE SOFTWARE, YOU AGREE TO BE BOUND BY THE TERMS AND
CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO THE
FOLLOWING TERMS AND CONDITIONS OF THIS AGREEMENT, DO NOT
USE THE SOFTWARE. NO REFUND WILL BE MADE BECAUSE THE
SOFTWARE WAS PROVIDED TO YOU AT NO CHARGE.
1. GRANT OF LICENSE
Canon grants you a personal, limited and non-exclusive license to use ("use"
as used herein shall include storing, loading, installing, accessing, executing
or displaying) the Software solely for the use with Products only on computers
directly or via network connected to the Products (the "Designated Computer").
You may allow other users of other computers connected to your Designated
Computer to use the Software, provided that you must assure that all such users
shall abide by the terms of this Agreement and shall be subject to restrictions
and obligations borne by you hereunder.
You may make one copy of the Software solely for a back-up purpose.
2. RESTRICTIONS
You shall not use the Software except as expressly granted or permitted herein,
and shall not assign, sublicense, sell, rent, lease, loan, convey or transfer
to any third party the Software. You shall not alter, translate or convert to
another programming language, modify, disassemble, decompile or otherwise
reverse engineer the Software and you shall not have any third party to do so.
3. COPYRIGHT NOTICE
You shall not modify, remove or delete any copyright notice of Canon or its
licensors contained in the Software, including any copy thereof.
4. OWNERSHIP
Canon and its licensors retain in all respects the title, ownership and
intellectual property rights in and to the Software. Except as expressly
provided herein, no license or right, express or implied, is hereby conveyed or
granted by Canon to you for any intellectual property of Canon and its
licensors.
5. EXPORT RESTRICTION
You agree to comply with all export laws and restrictions and regulations of
the country involved, and not to export or re-export, directly or indirectly,
the Software in violation of any such laws, restrictions and regulations, or
without all necessary approvals.
6. NO SUPPORT
NEITHER CANON, CANON'S SUBSIDIARIES OR AFFILIATES, THEIR
DISTRIBUTORS, OR DEALERS NOR CANON'S LICENSORS ARE
RESPONSIBLE FOR MAINTAINING OR HELPING YOU TO USE THE
SOFTWARE. NO UPDATES, FIXES OR SUPPORTS WILL BE MADE
AVAILABLE FOR THE SOFTWARE.
7. NO WARRANTY AND DISCLAIMER OF INDEMNITY
[NO WARRANTY] THE SOFTWARE IS PROVIDED "AS IS" WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
SOFTWARE IS WITH YOU. SHOULD THE SOFTWARE PROVE
DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION. SOME STATES OR LEGAL
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED
WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR
JURISDICTION TO JURISDICTION.
NEITHER CANON, CANON'S SUBSIDIARIES OR AFFILIATES, THEIR
DISTRIBUTORS, OR DEALERS NOR CANON'S LICENSORS WARRANT
THAT THE FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET
YOUR REQUIREMENTS OR THAT THE OPERATION OF THE SOFTWARE
WILL BE UNINTERRUPTED OR ERROR FREE.
[NO LIABILITY FOR DAMAGES] IN NO EVENT SHALL EITHER CANON,
CANON'S SUBSIDIARIES OR AFFILIATES, THEIR DISTRIBUTORS
DEALERS OR CANON'S LICENSORS BE LIABLE FOR ANY DAMAGES
WHATSOEVER (INCLUDING WITHOUT LIMITATION, LOSS OF BUSINESS
PROFITS, LOSS OF BUSINESS INFORMATION, LOSS OF BUSINESS
INTERRUPTION OR OTHER COMPENSATORY, INCIDENTAL OR
CONSEQUENTIAL DAMAGES) ARISING OUT OF THE SOFTWARE, USE
THEREOF OR INABILITY TO USE THE SOFTWARE EVEN IF EITHER
CANON, CANON'S SUBSIDIARIES OR AFFILIATES, THEIR
DISTRIBUTORS, DEALERS OR CANON'S LICENSORS HAVE BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES OR
LEGAL JURISDICTIONS DO NOT ALLOW THE LIMITATION OR
EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES, OR PERSONAL INJURY OR DEATH RESULTING FROM
NEGLIGENCE ON THE PART OF SELLER, SO THE ABOVE LIMITATION
OR EXCLUSION MAY NOT APPLY TO YOU.
[RELEASE OF LIABILITY] TO THE FULL EXTENT PERMITTED BY
APPLICABLE LAW, YOU HEREBY RELEASE CANON, CANON'S
SUBSIDIARIES AND AFFILIATES, THEIR DISTRIBUTORS, DEALERS AND
CANON'S LICENSORS FROM ANY AND ALL LIABILITY ARISING FROM
OR RELATED TO ALL CLAIMS CONCERNING THE SOFTWARE OR ITS
USE.
8. TERM
This Agreement is effective upon your acceptance hereof by the action to
indicate your acceptance or using the Software and remains in effect until
terminated. You may terminate this Agreement by destroying the Software
including any and all copies thereof. This Agreement shall also terminate if
you fail to comply with any terms hereof. Upon termination of this Agreement,
in addition to Canon enforcing its respective legal rights, you must then
promptly destroy the Software including any and all copies thereof.
Notwithstanding the foregoing, Sections 4, and 7 through 11 shall
survive any termination of this Agreement.
9. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE
The Software is a "commercial item," as that term is defined at 48 C.F.R. 2.101
(October 1995), consisting of "commercial computer software" and "commercial
computer software documentation," as such terms are used in 48 C.F.R. 12.212
(September 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1
through 227.7202-4 (June 1995), all U.S. Government End Users shall acquire the
Software with only those rights set forth herein. Manufacturer is Canon Inc./
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan.
10. SEVERABILITY
In the event that any section hereof is declared or found to be illegal by any
court or tribunal of competent jurisdiction, such section shall be null and
void with respect to the jurisdiction of that court or tribunal and all the
remaining provisions hereof shall remain in full force and effect.
11. ACKNOWLEDGEMENT
BY THE ACTION TO INDICATE YOUR ACCEPTANCE OR USING THE
SOFTWARE, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS
AGREEMENT, UNDERSTOOD IT, AND AGREE TO BE BOUND BY ITS TERMS
AND CONDITIONS. YOU ALSO AGREE THAT THIS AGREEMENT IS THE
COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN YOU
AND CANON CONCERNING THE SUBJECT MATTER HEREOF AND
SUPERSEDES ALL PROPOSALS OR PRIOR AGREEMENTS, VERBAL OR
WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN YOU AND
CANON RELATING TO THE SUBJECT MATTER HEREOF. NO AMENDMENT
TO THIS AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY
AUTHORISED REPRESENTATIVE OF CANON.
Should you have any questions concerning this Agreement, or if you desire to
contact Canon for any reason, please write to Canon's sales subsidiary or
distributor/dealer, serving the country where you obtained the Products.
***************************************************************************
Copyright (c) 2004 Canon, Inc.
Windows(R) 98/Me/NT4.0/2000/XP/Server 2003 PCL5e/5c Printer Driver
- Version 6.41
Windows(R) 98/Me/NT4.0/2000/XP/Server 2003 PCL6 Printer Driver
- Version 4.40
**************************************************************************
This README file contains supplemental information to help you install and
use your PCL5c, PCL5e or PCL6 printer driver software with Microsoft(R)
Windows(R) 98, Windows Me, Windows NT(R) 4.0, Windows 2000,
Windows XP and Windows Server 2003.
As with most software and hardware products, some information is made
available after the development of the manual. Updated information
regarding this driver software is provided in this README file. If you
require additional assistance, please contact Canon authorized dealer
or Canon authorized service provider.
Microsoft, Windows and Windows NT are registered trademarks of Microsoft
Corporation in the United States and/or other countries.
Important
---------
To view the manual in PDF format, Adobe Reader/Adobe Acrobat Reader is
required. If Adobe Reader/Adobe Acrobat Reader is not installed on
your system, please download it from the Adobe Systems Incorporated
website (http://www.adobe.com).
CONTENTS
========
Overview
System Requirements
Installing the Printer Driver
Accessing the Properties Dialog Box
Accessing Help Information
Cautions, Limitations and Restrictions
Overview
========
This printer driver allows you to print documents from any Windows 98,
Windows Me, Windows NT 4.0 Windows 2000, Windows XP or Windows Server 2003
application to your printer using Hewlett-Packard's PCL5c, PCL5e or PCL 6 data
format.
System Requirements
===================
The Canon PCL5c, PCL5e or PCL6 Printer Driver does not require any additional
system configuration beyond those required to run Windows
98/Me/NT4.0/2000/XP/Server 2003.
However, at least one of the following output ports is required:
- parallel printer port (LPT1, LPT2, etc.)
- USB port
- network interface
The network interface is recommended for the highest quality printing
throughput.
Installing the Printer Driver
=============================
To use this printer driver with software applications that operate
with Microsoft Windows 98/Me/NT4.0/2000/XP/Server 2003, use the following
installation procedure.
Note
----
* When using the installer for Windows NT4.0, Service Pack 6 or later must be
installed in your system.
* If you do not restart the computer when a message appears prompting you to do
so, Microsoft Office may not operate correctly after that. If this happens,
restart your computer.
* Under the Windows NT4.0 Terminal Server environment, you cannot install the
printer driver correctly if you execute the installer on the Remote Login
screen of the client PC. In this case, install the driver on the Terminal
Server. If you want to do so on the Remote Login screen, contact your Canon
authorized dealer or Canon authorized service provider.
* If you use the installer under Windows 98/Me, the installation may be
suspended depending on the system environment you use. In this case, restart
your computer, and then retry the installation.
* If you log on Windows NT4.0/2000 as a Power User and run the installer, the
installation may not be completed correctly. In this case, log in as an
Administrator, and then retry the installation.
* When updating the printer driver under the Windows NT4.0 Terminal Server
environment, use the installer and select "Update Drivers" or "Add Printers
and Update Drivers" function instead of using the New Driver button in the
Add Printer Wizard.
* If the following Canon drivers have been installed for Windows 2000/XP/
Server 2003,
it is necessary to restart the computer after the installation.
- PCL5e v4.70 or older printer driver
- PCL6 v2.40 or older printer driver
- PS v1.00 printer driver
- Fax v1.40 or older driver
* If you update the Canon PCL5e v4.60 or PCL6 v2.60 printer driver to PCL5e
v6.21 or PCL6 v4.21, the printer configuration may not be passed on
correctly.
* Under the environment where MetaFrame FR3 is installed and
AutoCreatedPrinter exists, the printer driver installation using the
Installer will be interrupted. When you exit the Installer, an error message
is displayed. After closing the error message, you cannot open the Printers
folder and log off the Client PC until you restart the computer.
In this case, delete AutoCreatedPrinter, restart the computer, and then
restart the Installer to install the printer driver. AutoCreatedPrinter will
be recreated automatically after restarting the computer.
* When you are using a shared printer in the Print Server of the Windows
NT4.0/2000 (Point and Print) environment, if you update the Canon PCL5e
v4.xx/PCL6 v2.xx to PCL5e v6.20/PCL6 v4.20 or later using the Installer, the
Printer Properties dialog box in the Client PC may not open correctly.
In this case, update the driver using the Add Printer Wizard, or first
uninstall the existing printer driver then install the new version of the
printer driver.
To install using the Installer:
1. Insert the Printer Driver Software CD-ROM into the CD-ROM drive.
2. Double-click the My Computer icon, and then double-click the CD-ROM drive
icon.
3. Double-click the PCL, and us_eng folder icons, and then double-click the
Setup.exe icon to start the installation process.
4. In the first dialog box of the Printer Driver Setup Wizard, click the Next
button, and then follow the instructions on the screen.
5. Select Manually Set Port to Install, and then click the Next button.
6. If the dialog box to select if a USB connection is used for installation is
displayed, click the Next button without selecting anything.
7. If the dialog box to select items to install is displayed, select PCL
Printer Driver and click the Next button.
8. If the dialog box to select how to execute the setup is displayed, select
Add Printers, or Add Printers and Update Drivers and click the Next button.
9. Click the Add/Delete button to select the driver you want to install.
10.Select the driver you want to install from the Printer List in the Add/
Delete Printers for Driver Installation dialog box. Then click the Add to
the Printer List for Driver Installation button.
11.Click the OK button in the Add/Delete Printers for Driver Installation
dialog box.
12.Check that the driver you want to install is selected in the Printer
Driver Setup Wizard dialog box. Then click the Next button.
13.Select the port setting method from Port Settings, click the Settings
button, and then select the port from the dialog box displayed next.
Then click the Next button.
14.In the next dialog box, check the installation settings, and then click the
Start button.
15.After the files are copied, click the Exit button to finish the
installation program.
You are now ready to print from any Windows software application.
Note:
* You can add a new driver without affecting existing driver if you select Add
Printers for step 8. If you select Add Printers and Update Drivers, all
existing drivers are updated automatically when you add a new driver.
* If you are using a shared printer in the Print Server (Point and Print)
environment, it is necessary to install Canon Driver Information Assist
Service in the server PC in order to set up the printer configuration
automatically or to use the Job Accounting feature.
To install using the Add Printer Wizard:
1. Click the Start button, point to Settings, and then click Printers.
2. In the Printers folder, double-click the Add Printer icon to start the Add
Printer Wizard.
3. Confirm the Wizard is started, and then click the Next button.
4. Follow the instructions on the screen to continue with the installation.
5. Insert the Printer Driver Software CD-ROM into the CD-ROM drive, and then
click the Have Disk button.
6. Click the Browse button to select the folder of the driver you want to
install, and then click the OK button.
PCL5c/PCL5e printer driver
- Windows 98/Me: \PCL\us_eng\win98_me\pcl5e_5c
- Windows NT4.0: \PCL\us_eng\winnt40\pcl5e_5c
- Windows 2000/XP/Server 2003: \PCL\us_eng\win2k_xp\pcl5e_5c
PCL6 printer driver
- Windows 98/Me: \PCL\us_eng\win98_me\pcl6
- Windows NT4.0: \PCL\us_eng\winnt40\pcl6
- Windows 2000/XP/Server 2003: \PCL\us_eng\win2k_xp\pcl6
7. Select your printer model from Printers, and then click the Next button.
8. Follow the instructions on the screen to continue, and then click the
Finish button to start copying the files.
You are now ready to print from any Windows software application.
To install using a USB connection (Windows 98/Me/2000/XP/Server 2003):
For Color imageRUNNER C3200, C3220, imageRUNNER C3100, C6800, 1600-2000,
LBP-2000, imageCLASS 2300 and LASER CLASS 700, you can print in a USB
environment.
Install the printer driver through a USB connection.
1. Insert the Printer Driver Software CD-ROM into the CD-ROM drive.
2. Double-click the My Computer icon, and then double-click the CD-ROM drive
icon.
3. Double-click the PCL, and us_eng folder icons, and then double-click the
Setup.exe icon to start the installation process.
4. In the first dialog box of the Printer Driver Setup Wizard, click the Next
button, and then follow the instructions on the screen.
5. Select Install Printer Driver through a USB Connection, select either
PCL5e/5c Driver or PCL6 Driver, and then click the Next button.
6. Click the Yes button in the message box asking if you want to start the
installation.
7. When a dialog box prompts, connect the USB plug, and then turn the printer
on.
8. After the files are copied, click the Finish button to finish the
installation program.
Accessing the Properties Dialog Box
======================================
The Properties dialog box contains several sheets that allow you to
setup and control your printer. To access the Properties dialog box, use one
of the following procedures, depending on your version of Windows:
Procedure for Windows 98/Me
---------------------------
To access from the Desktop:
1. Click the Start button, point to Settings, and then click Printers.
2. Right-click the printer icon for your printer in the Printers folder, and
then click Properties.
To access from within an application:
1. Click the Print command to display the Print dialog box.
2. Select your printer name from the drop-down list box, and then click the
Properties button.
Procedure for Windows NT4.0/2000/XP/Server 2003
-----------------------------------------------
To access from the Desktop:
1. Click the Start button, point to Settings, and then click Printers.
2. Right-click the printer icon for your printer in the Printers folder, and
then click Properties to open the Printer Properties dialog box, or click
Document Defaults (Windows NT4.0) or Printing Preferences (Windows 2000/XP/
Server 2003) to open the Document Properties dialog box.
To access from within an application:
1. Click the Print command to display the Print dialog box.
2. Select your printer name from the drop-down list box, and then click the
Properties button.
Accessing Help Information
==========================
From the Properties dialog box, you can click the Help button to
display the information about the Canon PCL5c, PCL5e or PCL6 printer driver.
You can also click the ? button in the upper right corner of dialog boxes and
then click a specific item in a dialog box for help with that item.
Cautions, Limitations and Restrictions
======================================
1. If you have problems printing some graphics objects when printing with the
PCL5e printer driver, you should select the alternate Graphics Mode
(HP-GL/2 or Raster) to the one you are using currently in the Graphics
sheet. The Graphics sheet is displayed by clicking the Details button in the
Quality sheet.
2. If you have problems printing some graphics objects when printing with the
PCL6 printer driver, you should use the PCL5e printer driver and select
Raster for Graphics Mode in the Graphics sheet. The Graphics sheet is
displayed by clicking the Details button in the Quality sheet.
3. Certain TrueType fonts may not be printed correctly. If this occurs,
you should disable the Use Printer Fonts check box in the Detailed Settings
for Objective dialog box to ensure that all fonts are downloaded with the
document, rather than using only those fonts that reside in the printer. The
Detailed Settings for Objective dialog box is displayed by clicking the
Details button in the Quality sheet.
If the problem persists, you should use the PCL5e printer driver and select
Raster for Graphics Mode in the Graphics sheet, and then enable the Print
Text as Graphics check box in the Misc. sheet.
4. Rotated text will not be printed correctly with some applications when
TrueType Mode is set to Download as TrueType or Download as Bit
Image in the Detailed Settings for Objective dialog box. The Detailed
Settings for Objective dialog box is displayed by clicking the Details
button in the Quality sheet. To avoid this problem, you should use the PCL5e
printer driver and select Raster for Graphics Mode in the Graphics sheet,
and then enable the Print Text as Graphics check box in the Misc. sheet.
5. When Overlay Printing, use the overlay form whose size is the same as the
paper size of the document you are going to print.
6. In some applications, the printed output may not be correct when using the
scaling feature. In this case, use the PCL5e printer driver and select
Raster for Graphics Mode in the Graphics sheet. The Graphics sheet is
displayed by clicking the Details button in the Quality sheet.
7. A document which contains different paper sizes across the pages may not be
cross-sorted (output copies turned at a 90 degrees for each copy) correctly.
Because the printer does not support cross-sorting of paper sizes other
than B5, A4 and Letter, the pages of unsupported paper size documents
will not be cross-sorted.
8. When creating a custom paper size in the Print Server Properties dialog box
of Windows NT 4.0/2000/XP/Server 2003, specify the margins as 0.63cm/0.25in
or more.
9. Print jobs containing fill patterns, especially in Corel Draw, have
been observed to output slowly when printing with the PCL6 driver or PCL5e
driver in HP-GL/2 mode due to the large size of the file. To avoid this
situation, it is recommended that you use the PCL5e driver and select Raster
for Graphics Mode in the Graphics sheet. The Graphics sheet is displayed by
clicking the Details button in the Quality sheet.
10.When creating a overlay form file in one machine operating Windows
NT4.0/2000/XP/Server 2003, you cannot specify another machine operating
Windows NT4.0/2000/XP/Server 2003 in the network as the place to save the
new form file.
11.Specify a NetWare Server name or NDS tree name up to 15 characters.
12.When you store a landscape document in the Mail Box of the printer, the
staple position displayed on the printer control panel differs from the
setting of the printer driver. Also, if you specify the staple position of
a landscape document stored in the Mail Box from the printer control panel,
the actual staple position of the output document may not correspond with
the orientation specified.
13. If you use a shared printer, in some cases resource information that is
downloaded using NetSpot Resource Downloader may not be obtained from the
client PC by clicking the Get Resource Information button in the
Configuration sheet (Windows 98/Me) or Device Settings sheet (Windows
NT4.0/2000/XP/Server 2003).
14. When using NetSpot Resource Downloader to download form files
(*.p5e, *.p5c) created in the Overlay sheet to the device, you must
specify a title for the form file.
If a title is not specified, form files downloaded using NetSpot Resource
Downloader cannot be used for overlay printing.
15. When printing a document created in Microsoft Word XP under Windows
98/Me, the document may not be printed on the specified paper type. In
this case, select Enabled for Spooling at Host in the Configuration sheet,
and then try again.
16. For Window XP/Server 2003, it is necessary to use TCP/IP as a network
protocol in order to set up the printer configuration automatically when
using a Remote Desktop environment, or when Windows is shared by multiple
users.
17. When inserting inserted sheets into the document, if you accidentally
specify a drawer that contains tab paper as the paper source for the
inserted sheets, the paper source automatically returns to the plain paper
setting.
18. If you select Rotate Print Data 180 Degrees in the Advanced Settings dialog
box when any Finishing option is selected, the document may output in an
unexpected style.
19. When you use Adobe Illustrator 8.0 or later and do not select the Bitmap
Printing option, it may take a long time to finish printing, or thin lines
or characters may be blurred. If you experience such problem, select the
Bitmap Printing option.
20. When you share the printer on the print server and specify a shared printer
name in 13 or more characters, neither automatic printer configuration nor
the Job Accounting feature are available on the client PCs.
21. Under the following environments, NWADMIN may not be able to add resources
to NDPS Broker correctly if you are using Windows 2000/XP/Server 2003
driver.
- Novell Netware Client for Win9x version 3.32 SP1
- Novell Netware Client for WinNT/2000/XP/Server 2003 version 4.83 SP1
If you experience difficulty, contact your Canon authorized dealer or Canon
authorized service provider.
22. For LASER CLASS 700 when printing several copies of a document consisting
of mixed paper sizes with the collate option, do either one of the
followings:
-Use the collate option provided by the application.
-For Windows 98/Me/2000/XP/Server 2003, select Enabled for Spooling at
Host in the Configuration (Windows 98/Me) or Device Settings (Windows
2000/XP/Server 2003) sheet before printing.
23. If it takes long time to print a document from CorelDraw, the following
settings may shorten the printing time.
1) From the Tools menu, select Options.
2) In the Options dialog box, select Global->Printing->Driver Compatibility
from the tree view in the left side of the dialog box.
3) In the Driver Compatibility sheet, select Canon PCL printer driver from
the Printer drop-down list, and then select the following check boxes.
-Use software clipping for fills,
-Output bitmaps in 64k chunks, and
-Send beziers and paths to driver
4) Click the OK button to close the dialog box.
24. For imageRUNNER 8500, 7200 and 105 under Windows 98/Me/2000/XP/Server
2003, when using booklet printing with saddle stitch, the printed cover
page loaded from Document Insertion Unit may be attached upside down. If
this occurs, put the cover page in the Document Insertion Unit in the
opposite direction.
25. For Windows 2000/XP/Server 2003, when printing a document with a banner
page attached from the server PC under the NetWare environment, two copies
of the banner page may be output.
26.For imageRUNNER 2000/1600, 2010/1610, 330-400, 600-550-60 and LBP-2000,
refer to the following points when making the Mail Box name file.
- Any name can be used for a file
- Use [BoxName] as the section name
- Use the numbers 0 to 255 as the key names
- The key and box name together cannot exceed 24 characters
- Include [Key=1] as one of the keys
Note:
It is unnecessary to include keys for a box number whose name is not
specified.
Also, if the keys without box name are included in the file, they will be
ignored.
Sample File
-----------------------------
[BoxName]
Key=1
0=
1=Mike
2=Jack Winters
3=Sung Yim
50=Brian Wrage
48=
58=
55=Lee Farrell
71=James Sharp
99=Brian James
-----------------------------
<END OF README.TXT>
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.