**Firmware upgrade and adjusting laser power tool** This file can re-adjust the laser power and upgrade firmware to 7.GZ. 1. Un-zip the 1032A.exe, and you would see three files as follows, 1032-7gz.exe => firmware upgrade tool service.bin => laser adjust tool readme.txt => this file 2. Boot the PC with MS-DOS mode. (Attention ! : Upgrade utility cannot work on MS-DOS window.) 3. Execute 1032-7gz.exe Attention ! 1. Tray will open when adjusting laser power, please don't close the tray. 2. There are three phases in the process and it would cost almost 2 minutes. 3. When you see " Please restart your computer ", it means the process is O.K.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.