Server Driver for NetWare 3.12 Introduction: ------------- This document describes the procedure to install the NetWare V3.12 server driver for LG LNIC-10/100A Series Fast E-NET Card. Location of Driver: \NWSERVER\312\LNICND.LAN Installation Procedure: ----------------------- Before you start with the installation process, make sure that the Novell NetWare V3.12 server is properly installed. Similarly, your adapter should also be properly installed in your server. 1. Make a sub-directory NLMS.OLD under <SRVPATH> directory which includes SERVER.EXE. Ex. <SRVPATH> = SRV312. >MD \SRV312\NLMS.OLD 2. Save NBI.NLM, MSM.NLM and ETHERTSM.NLM to NLMS.OLD sub-directory. 3. Insert driver diskette into floppy disk drive. 4. Copy all provided NLM and LAN files into your dos directory which includes SERVER.EXE, and rename NBI31X.NLM and MSM31X.NLM: Ex. >COPY A:\NWSERVER\312\NBI31X.NLM C:\SRV312\NBI.NLM >COPY A:\NWSERVER\312\MSM31X.NLM C:\SRV312\MSM.NLM >COPY A:\NWSERVER\312\ETHERTSM.NLM C:\SRV312 >COPY A:\NWSERVER\312\LNICND.LAN C:\SRV312 5. Start the NetWare Server. > CD \SRV312 > SERVER 6. From the Novell Server side, execute "LOAD INSTALL". Type: LOAD INSTALL Select <System Options> Select <Edit AUTOEXEC.NCF File> 7. Add the following commands into the server's AUTOEXEC.NCF file. LOAD C:\SRV312\NBI.NLM LOAD C:\SRV312\MSM.NLM LOAD C:\SRV312\ETHERTSM.NLM LOAD C:\SRV312\LNICND SLOT=1 FRAME=Ethernet_802.3 NAME=LNICND_1_E83 BIND IPX LNICND_1_E83 NET=1111 LOAD C:\SRV312\LNICND SLOT=1 FRAME=Ethernet_802.2 NAME=LNICND_1_E82 BIND IPX LNICND_1_E82 NET=1113 LOAD C:\SRV312\LNICND SLOT=1 FRAME=Ethernet_SNAP NAME=LNICND_1_ESP BIND IPX LNICND_1_ESP NET=1115 LOAD C:\SRV312\LNICND SLOT=1 FRAME=Ethernet_II NAME=LNICND_1_EII BIND IPX LNICND_1_EII NET=1117 Note: The SLOT parameter should be set as the number of the PCI slot on which LNIC-10/100A Series resides. 8. Restart the server again. NOTES: ------ 1. Installing Multiple LAN Adapters: The keyword "SLOT" is provided for multiple LAN adapters in a single server by the driver LNICND.LAN. So, add "SLOT" in LOAD commands. For example: LOAD LNICND SLOT=1 FRAME=Ethernet_802.2 NAME=LAN_A BIND IPX TO LAN_A NET=111 LOAD LNICND SLOT=2 FRAME=Ethernet_802.2 NAME=LAN_B BIND IPX TO LAN_B NET=222 2. Use keyword AUTO, 100FULL, 100HALF, 10FULL, 10HALF to specify the media type of the LNIC-10/100A Series. For example: ; Specify AUTO-DETECT LOAD LNICND AUTO FRAME=Ethernet_802.2 NAME=LAN_A BIND IPX TO LAN_A NET=111 ; Specify 100Mbps, Half-duplex LOAD LNICND 100HALF FRAME=Ethernet_802.2 NAME=LAN_A BIND IPX TO LAN_A NET=111 The default media type is auto-detect(i.e. none of these keywords is specified). 3. Installing One LAN adapter with Multiple Frame Types: When binding multiple frame types to one adapter, enter a LOAD and BIND statement for each frame type. Each LOAD statement will use a different network number on the bind statement. It is required to supply a name on each load line in order to avoid being prompted for which board to bind IPX to. If you do not have the name option in the AUTOEXEC.NCF, it will not execute completely without user intervention. Example: LOAD LNICND FRAME=ETHERNET_802.3 NAME=LNICND_1_E83 BIND IPX TO LNICND_1_E83 NET=11111 LOAD LNICND FRAME=ETHERNET_802.2 NAME=LNICND_1_E82 BIND IPX TO LNICND_1_E82 NET=33333 LOAD LNICND FRAME=ETHERNET_SNAP NAME=LNICND_1_ESP BIND IPX TO LNICND_1_ESP NET=55555 LOAD LNICND FRAME=ETHERNET_II NAME=LNICND_1_EII BIND IPX TO LNICND_1_EII NET=77777 If problems occur during the binding process, your screen will prompt you with error messages. Please refer to your NetWare 386 manual for details on these messages. -- End --Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.