IBM Easy Play
Card services has been detected from your PC. ECARDCS will be
used to configure the Ethernet PCMCIA card automatically
with your IBM Easy Play Software.
ECARDCS will be loaded in the CONFIG.SYS as follows:
DEVICE=C:\EZPLAY\IBMDSS01.SYS /S0=1 ®¿
Socket Services ÄÄÄÄÄÄÄÙ
DEVICE=C:\EZPLAY\IBMDOSCS.SYS ®¿
Card Services ÄÄÄÄÄÄÄÄÄÙ
DEVICE=C:\EZPLAY\DICRMU01.SYS /MA=C000-CFFF®¿
Resource Allocator ÄÄÄÄÄÄÄÄÄÄÄÙ
DEVICE=C:\EZPLAY\$ICPMDOS.SYS ®¿
Power Manager ÄÄÄÄÄÄÄÄÄÙ
Then load ECARDCS will be loaded:
DEVICE=C:\ECARDCS.EXE /IRQ 3 /IO 300®¿
Grey Cell card Client ÄÄÄÄÄÄÙ
before :
DEVICE=C:\EZPLAY\AUTODRV.SYS AUTODRV.INI®¿
Generic Client ÄÄÄÄÄÄÄÄÄÄÄÄÙ
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.