ECARDCS PCMCIA Settings
This installation program will first make sure that your PC has
the following free resources before ECARDCS can be used to
enable the Ethernet PC card.
1 x IRQ Interrupt Line
32 bytes x I/O Address Space
The default IRQ line is 3, and I/O address is 300h (this is the
same as an NE2000 card).
If you need to specify a different parameter, they are
selectable as follows:
a) DOS command line :
C:\>ECARDCS /IRQ=x /IO=nnn
b) CONFIG.SYS file
DEVICE=ECARDCS.EXE /IRQ=x /IO=nnn
IRQ = Interrupt Number, valid options for
x are 3, 4, 5, 9, 10, 12, 15.
IO = I/O Base Address, aalid options for
nnn are 300,320,340,360.
Default settings are IRQ = 3, and IO base = 300.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.