ECARD Installation
ECARD.EXE will recognise the host PCMCIA controller and any
PCMCIA socket services software that has been loaded.
ECARD will recognise and configure the following controllers:
Intel 82365SL Controller (and compatibles)
Cirrus
Ricoh
Vadem
DataBook TCIC-2/N Controller
Toshiba T3300 (TROPIC) Controller
ThinkPad 720 Intel for MCA Variant
Sharp Controller
Socket Services 1.0+
Socket Services 2.0+
The ECARD enabler can be used as a DOS command or as a device
driver in CONFIG.SYS. And must be executed before the driver is
initialised.
ECARD does not terminate and stay in resident memory, and so it
will not take away any RAM from your PC.
For networks which load NDIS drivers in the CONFIG.SYS, ECARD
must be loaded as a device driver.
This installation program will find the optimum position for
the ECARD program.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.