*****************************************************************************
* *
* Microsoft Windows 95 Installation *
* for Grey Cell System 3400 Series Fax/Modem/Ethernet Card *
* *
*****************************************************************************
This is also fully documented in the User's Manual (second edition onwards)
and the Route Map / Express Set Up guide.
This section of the guide explains how to configure and install the 3400
Series PC card with Microsoft's Windows 95
Windows 95 Plug and Play
Windows 95 has PCMCIA plug-and-play software support. Check if this has been
installed by looking at your Control Panel - System Properties. The Device
Manager will show a "PCMCIA Socket" entry if already installed.
If the PCMCIA support is not already installed go to the My Computer option
from the Windows 95 desktop and select the Control Panel. Then choose the
Add New Hardware option and Install Specific Hardware. Finally choose PCMCIA
Socket and follow the installation instructions.
If you have any problems for this part of the installation you need to contact
your PC supplier or Microsoft.
Windows 95 3400 Series Installation
1) Restart your PC and run Windows 95.
2) Insert the 3400 Series PC card into any PCMCIA slot. The "New Hardware
Found" dialog box will appear.
When this dialog box appears select "Driver from disk provided by
hardware manufacturer", click on "OK" and proceed to step 4.
If the "New Hardware Found" dialog box doesn't appear:
1 Select the Control Panel from My Computer on the Windows 95 desk top.
2 Select the System icon and then choose Device Manager.
3 Select Multi-function Adapters and delete the Grey Cell 3400 Fax/Modem/
Ethernet Card entry.
4 Then select Modem and delete the Grey Cell 3400 Series (Modem) entry.
5 Finally select Network Adapters and delete the Grey Cell 3400 Series (Ethernet) entry.
6 Then shut down Windows 95 and switch off the machine.
7 Remove the Grey Cell Fax/Modem/Ethernet Card.
8 Then restart Windows 95 and go back to step 2.
4) Type in the path name A:\WIN95 and insert Installation Disk into drive A:
Repeat from step 3 as many times as necessary. This is usually 3 times.
5) Complete the Window 95 PCMCIA installation procedures and then go the to
Control Panel and set up your particular network parameters.
Checking Windows 95 3400 Series Installation
To check Windows 95 has installed the 3400 Series PC card correctly look at
your Control Panel - System Properties. The device manager should show the
Grey Cell card under "Multi-function adapters", "Modem" and "Network adapters"
without any marks on the icons.
If any of the Grey Cell icons are shown with a yellow or red disk next to
them, then re-installation is necessary.
First highlight the "Grey Cell 3400 Fax/Modem/Ethernet Card" under "Multi-function
adapters" then click on the Remove button. Then follow from 2 above.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.