NET.CFG File Modifications This installation program has located a copy of a file called NET.CFG on your hard disk. This file is used by network drivers to get information on the network card settings. The installation program will modify your NET.CFG file so that the IRQ, IO and COM port and memory settings match those chosen to configure the 3400 series PC card. This installation will add or modify lines in the NET.CFG file as follows: Link driver NE2ODI INT 3 PORT 300 Frame Ethernet_802.3 Frame Ethernet_II Frame Ethernet_802.2 Frame Ethernet_SNAP Link driver GCS3000 INT 5 PORT 300 COM 2 MEM D8000 Frame Ethernet_802.3 Frame Ethernet_II Frame Ethernet_802.2 Frame Ethernet_SNAP The PORT, INT, COM and MEM values will be set to reflect your chosen settings.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.