CARD2CS PCMCIA Settings This installation program will first make sure that your PC has the following free resources before CARD2CS can be used to enable the 3400 Series PC card. 1 x IRQ Interrupt Line 32 bytes x LAN I/O Address Space 8 bytes x Modem I/O Address Space 1 x Free COM port The default IRQ line is 3, LAN I/O address is 300h and modem COM port is 2 (IO 2F8h). If you need to specify a different parameter, they are selectable as follows: a) DOS command line : C:\>CARD2CS /COMy /IRQ=x /IO=nnn b) CONFIG.SYS file DEVICE=CARD2CS.EXE /COMy /IRQ=x /IO=nnn IRQ = Interrupt Number, valid options for x are 3, 4, 5, 9, 10, 12, 15. IO = I/O Base Address, valid options for nnn are 300,320,340,360. COM = Modem COM port address, valid options for y are 2, 3 or 4.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.