MT3410ZLX driver disk, version 1.0 contains the
modem, LAN, and Multifunction info files, a LAN
diagnostic program, and the Lucent flash utility
for loading new firmware in the modem.
Instructions for installing MT3410ZLX in Windows 95:
1. Uninstall any prior network support in /Control
Panel/Network and remove any existing Network Card.
2. Insert the MT3410ZLX into the PCMCIA slot
3. Windows 95 will detect the new hardware and launch
the modem installation wizard.
4. Insert the driver disk in the disk drive, then click
"next".
5. Windows 95 will look to drive A and detect the INF
files for the MT3410ZLX (if your drive is other
than drive A, you will have to use "browse" to find
the installation files on that floppy disk drive.)
6. Click "finish". Since the 3410ZLX is a Modem/LAN
card, Windows 95 will find new hardware twice more
as it detects and installs the LAN and Multifunction
drivers for the card. Your Windows 95 CDROM will
also be required during the installation of the
Network support.
*** On using the Diagnostic Utility:
This utility must be run from Windows 95 "Command
Prompt Only". To get in this mode, select "Shutdown"
in Win95 and choose the reboot option. Before the
"Starting Windows 95" message is displayed, hit your
F8 function key. A menu will come up. On this menu,
select "Command Prompt Only". When you arrive at
the command prompt, insert the 3410ZLX in the
PCMCIA slot, then go to the directory containing
the utility and run the Diag.bat file. The utility
will run, and display the LAN information on the
screen for you. After copying the info you need,
ctrl-alt-del to get back into Windows 95.
Instructions for upgrading the modem with flash firmware:
*** This utility will only work in Windows 95. Also, the
MT3410ZLX must be installed and operational for
the flash utility to find it ***
*** Important Note: All modems are shipped from us
with current firmware. Upgrade your modem only if
you are sure the firmware you want to load is a
newer version!!! If there is any doubt, call
Technical Support. The phone number is listed
below.
1. The firmware file to be programmed into the modem
must be named modem.hex. You will have to rename the
firmware file if it has a different name.
2. Go into Hyperterminal and send command ATI to the
modem. Write down the version number that is listed.
3. Exit Hyperterminal, then run flash.exe through
Windows Explorer or drag and drop the icon to your
desktop and double-click on it.
4. Select the file modem.hex when the program asks
which file to program into the modem.
5. At this point, the utility will go out, find the
modem, erase the current firmware in the modem, then
install the firmware contained in the modem.hex file.
6. Again send the command ATI via Hyperterminal to
verify that the newer version of firmware is
installed in the modem.
***The current firmware as of 10-22-97 is version 1.04A.
Updates can be found on the Multitech BBS direct dial at
612-785-3702 or tollfree within the US at 1-800-392-2432.
The Multitech BBS is also mirrored on the internet at
the following sites:
ftp.multitech.com/modemfirmware
http://ftp.multitech.com/firmware.htm.
Any questions can be directed to Technical Support at
612-717-5863 for international calls or tollfree within
the USA at 1-800-972-2439.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.