MT3400ZLX driver disk, version 1.0 contains the
3400ZLX.INF Windows 95 info file, as well as the Lucent
flash utility for loading new firmware in the modem.
Instructions for installing MT3400ZLX in Windows 95:
1. Insert the MT3400ZLX into the PCMCIA slot
2. Windows 95 will detect the new hardware and launch
the modem installation wizard.
3. Insert the driver disk in the disk drive, then click
"next".
4. Windows 95 will look to drive A and detect the INF
file for the MT3400ZLX (if your drive is other than
drive A, you will have to use "browse" to find the
3400ZLX.INF file on that floppy disk drive.)
5. Click "finish" and the modem is now installed.
Instructions for upgrading the modem with flash firmware:
***** This utility will only work in Windows 95. Also,
the MT3400ZLX must be installed and operational for
the flash utility to find it *****
***** Important Note: All modems are shipped from us
with current firmware. Upgrade your modem only if
you are sure the firmware you want to load is a
newer version!!! If there is any doubt, call
Technical Support. The phone number is listed
below.
1. The firmware file to be programmed into the modem
must be named modem.hex. You will have to rename the
firmware file if it has a different name.
2. Go into Hyperterminal and send command ATI to the
modem. Write down the version number that is listed.
3. Exit Hyperterminal, then run flash.exe through
Windows Explorer or drag and drop the icon to your
desktop and double-click on it.
4. Select the file modem.hex when the program asks
which file to program into the modem.
5. At this point, the utility will go out, find the
modem, erase the current firmware in the modem, then
install the firmware contained in the modem.hex file.
6. Again send the command ATI via Hyperterminal to
verify that the new version of firmware is installed
in the modem.
*** The current firmware as of 8-6-97 is version 1.03A.
Updates can be found on the Multitech BBS direct dial at
612-785-3702 or tollfree within the US at 1-800-392-2432.
The Multitech BBS is also mirrored on the internet at
the following sites:
ftp.multitech.com/modemfirmware
http://ftp.multitech.com/firmware.htm.
Any questions can be directed to Technical Support at
612-717-5863 for international calls or tollfree within
the USA at 1-800-972-2439.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.