NET40BC.INF Driver File Contents (e40bc.exe)

;
; NET40BC.INF
; Copyright 1993-1995, CNet Technology

[version]
LayoutFile=layout.inf
signature="$CHICAGO$"
Class=Net
; ClassGUID={4d36e972-e325-11ce-bfc1-08002be10318}
provider=%V_MS%

[Manufacturer]
%V_CNet%=CNet

[CNet]
%CNetPCM.DeviceDesc%=*CNET40BCab1.ndi, PCMCIA\CNet-CN40BC_Ethernet-DC06 ; 40BC
%CNetPCM.DeviceDesc%=*CNET40BCab2.ndi, PCMCIA\CNet-CN40BC_Ethernet-0C53 ; 40BC
%CNetPCM.DeviceDesc%=*CNET40BCc1.ndi, PCMCIA\CNet-CN40BC_Ethernet-1E11 ; 40BC

;****************************************************************************
;    40BC NE2000 Compatible PCMCIA Adapter
;****************************************************************************

[*CNET40BCab1.ndi]
AddReg=*CNET40BCab1.ndi.reg,ne2000cc.ndi.reg,Clone.params.reg
[*CNET40BCab1.ndi.reg]
HKR,Ndi,DeviceID,,"PCMCIA\CNet-CN40BC_Ethernet-DC06"

[*CNET40BCab2.ndi]
AddReg=*CNET40BCab2.ndi.reg,ne2000cc.ndi.reg,Clone.params.reg
[*CNET40BCab2.ndi.reg]
HKR,Ndi,DeviceID,,"PCMCIA\CNet-CN40BC_Ethernet-0C53"

[*CNET40BCc1.ndi]
AddReg=*CNET40BCc1.ndi.reg,ne2000cc.ndi.reg,Clone.params.reg,CN40BC.CIS.Override
[*CNET40BCc1.ndi.reg]
HKR,Ndi,DeviceID,,"PCMCIA\CNet-CN40BC_Ethernet-1E11"

[ne2000cc.ndi.reg]
; key,subkey,valuname,type,value
HKR,,DevLoader,,*ndis
HKR,,DeviceVxDs,,e200p.sys
HKR,,EnumPropPages,,"netdi.dll,EnumPropPages"
; NDIS Info
HKR,NDIS,LogDriverName,,"NE2000"
HKR,NDIS,MajorNdisVersion,1,03
HKR,NDIS,MinorNdisVersion,1,0A
; Interfaces
HKR,Ndi\Interfaces,DefUpper,,"ndis3"
HKR,Ndi\Interfaces,DefLower,,"ethernet"
HKR,Ndi\Interfaces,UpperRange,,"ndis3"
HKR,Ndi\Interfaces,LowerRange,,"ethernet"
; Install sections
HKR,Ndi\Install,ndis3,,"ne2000.ndis3"

HKR,NDI,CardType,,"PCMCIA"

; Install NDIS3
[ne2000.ndis3]
CopyFiles=ne2000.ndis3.CopyFiles
[ne2000.ndis3.CopyFiles]
e200p.sys

; Install NDIS2
[NE2000.ndis2]
CopyFiles=ne2000.ndis2.CopyFiles
[ne2000.ndis2.CopyFiles]
ne2000.dos

; Install ODI
[NE2000.odi]
CopyFiles=ne2000.odi.CopyFiles
[ne2000.odi.CopyFiles]
ne2000.com

; extra params for clones
[Clone.params.reg]
; Resources
HKR,,InterruptNumber,1,04,00,00,00
HKR,,IOBaseAddress,1,02,00,00,00
HKR,NDI\params\InterruptNumber,resc,1,04,00,00,00
HKR,Ndi\params\interruptNumber,ParamDesc,,"Interrupt Level"
HKR,NDI\params\InterruptNumber,flag,1,60,00,00,00
HKR,NDI\params\IOBaseAddress,resc,1,02,00,00,00
HKR,NDI\params\IOBaseAddress,ParamDesc,,"I/O Base Address"
HKR,NDI\params\IOBaseAddress,flag,1,20,00,00,00
;ndis2
HKR,NDI\params\Interrupt,resc,1,04,00,00,00
HKR,Ndi\params\interrupt,ParamDesc,,"Interrupt Level"
HKR,NDI\params\Interrupt,flag,1,10,00,00,00
HKR,NDI\params\IOBase,resc,1,02,00,00,00
HKR,NDI\params\IOBase,ParamDesc,,"I/O Base Address"
HKR,NDI\params\IOBase,flag,1,10,00,00,00

[CN40BC.CIS.Override]
;----------------------------------------------------------------
;	Resource override information
;----------------------------------------------------------------

HKR,Override,0000,1,\
;
; CONFIGMG_VERSION
;
00,04,00,00, \
;
; PRIORITY
;
00,00,00,00, \

;-------------------------------------------------------------
; I/O Resource Descriptor
;-------------------------------------------------------------
24,00,00,00, \					; Total length of I/O Resource Descriptor
02,00,00,00, \					; ResType_IO = 0x00000002
01,00, \						; IOD_Count;
0C,00, \						; IOD_Type;		// IOType_Range = 0x000C
00,00, \						; IOD_Alloc_Base;
00,00, \						; IOD_Alloc_End;
00,00, \						; IOD_DesFlags;
00, \							; IOD_Alloc_Alias;
00, \							; IOD_Alloc_Decode;
E0,FF, \						; IOR_Align;		// Mask for base alignment
20,00, \						; IOR_nPorts;		// Number of ports
;
00,02, \						; IOR_Min;		// Min port address
FF,03, \						; IOR_Max;		// Max port address
;
00,00, \						; IOR_RangeFlags;	// Flags
00, \							; IOR_Alias;		// Alias offset
00, \							; IOR_Decode;		// Address specified
40,00,00,00, \						; PCCARD flags, 0x40 = 16-bit port

;-------------------------------------------------------------------------
; IRQ Resource Descriptor
;-------------------------------------------------------------------------

14,00,00,00, \						; Total length of IRQ Resource Descriptor
04,00,00,00, \						; ResType_IRQ = 0x00000004
00,00, \						; IRQD_Flags;
00,00, \						; IRQD_Alloc_Num;	// Allocated IRQ number
FF,FF, \						; IRQD_Req_Mask;	// Mask of possible IRQs
00,00, \						; IRQD_Reserved;
20,00,00,00, \						; PCCARD flags, 0x20 = Level mode intís

;-------------------------------------------------------------------------
;		This field need to be filled for PCMCIA card
;
;		REQUEST_CONFIG_PKT Descriptor
;
;--------------------------------------------------------------------------

19,00,00,00, \						; Length of REQUEST_CONFIG_PKT Descriptor
7C,89,00,00, \						; ResType_Ignored_Bit+PCCARD_DEVICE_ID= 0x897C
00,00, \							; Socket;
02,00, \							; Attributes;
32, \								; Vcc;
32, \								; Vpp1;
32, \								; Vpp2;
02, \								; IntType;
F8,03,00,00, \			    ; ConfigBase;
00, \								; Status;
00, \								; Pin;
00, \								; Copy;
20, \								; ConfigIndex;
03, \								; Present;
;
00,00,00,00							; TERMINATOR


;****************************************************************************
; Destination Directories
;****************************************************************************
[DestinationDirs]
DefaultDestDir		    =11 ; LDID_SYS
ne2000.ndis3.CopyFiles	    =11
ne2000.ndis2.CopyFiles	    =26 ; LDID_WINBOOT
ne2000.odi.CopyFiles	    =26

;****************************************************************************
; Localizable Strings
;****************************************************************************
[strings]
; Provider
V_MS="Microsoft"
; Manufacturers
V_CNet="CNet"
;Description
CNetPCM.DeviceDesc=  "CNet CN40BC PCMCIA Ethernet Card"


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.25