CANON SOFTWARE LICENSE AGREEMENT IMPORTANT! This is a legal agreement ("Agreement") between you and Canon Inc. ("Canon") and governing your use of Canon's software programs including the related manuals or any printed material thereof (the "Software") for certain Canon's copying machines, printers and multifunctional peripherals (the "Products"). READ CAREFULLY AND UNDERSTAND ALL OF THE RIGHTS AND RESTRICTIONS DESCRIBED IN THIS AGREEMENT BEFORE USING THE SOFTWARE. BY CLICKING THE BUTTON INDICATING YOUR ACCEPTANCE AS STATED BELOW OR USING THE SOFTWARE, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO THE FOLLOWING TERMS AND CONDITIONS OF THIS AGREEMENT, DO NOT USE THE SOFTWARE. NO REFUND WILL BE MADE BECAUSE THE SOFTWARE WAS PROVIDED TO YOU AT NO CHARGE. 1. GRANT OF LICENSE Canon grants you a personal, limited and non-exclusive license to use ("use" as used herein shall include storing, loading, installing, accessing, executing or displaying) the Software solely for the use with Products only on computers directly or via network connected to the Products (the "Designated Computer"). You may allow other users of other computers connected to your Designated Computer to use the Software, provided that you must assure that all such users shall abide by the terms of this Agreement and shall be subject to restrictions and obligations borne by you hereunder. You may make one copy of the Software solely for a back-up purpose. 2. RESTRICTIONS You shall not use the Software except as expressly granted or permitted herein, and shall not assign, sublicense, sell, rent, lease, loan, convey or transfer to any third party the Software. You shall not alter, translate or convert to another programming language, modify, disassemble, decompile or otherwise reverse engineer the Software and you shall not have any third party to do so. 3. COPYRIGHT NOTICE You shall not modify, remove or delete any copyright notice of Canon or its licensors contained in the Software, including any copy thereof. 4. OWNERSHIP Canon and its licensors retain in all respects the title, ownership and intellectual property rights in and to the Software. Except as expressly provided herein, no license or right, express or implied, is hereby conveyed or granted by Canon to you for any intellectual property of Canon and its licensors. 5. EXPORT RESTRICTION You agree to comply with all export laws and restrictions and regulations of the country involved, and not to export or re-export, directly or indirectly, the Software in violation of any such laws, restrictions and regulations, or without all necessary approvals. 6. NO SUPPORT NEITHER CANON, CANON'S SUBSIDIARIES OR AFFILIATES, THEIR DISTRIBUTORS, OR DEALERS NOR CANON'S LICENSORS ARE RESPONSIBLE FOR MAINTAINING OR HELPING YOU TO USE THE SOFTWARE. NO UPDATES, FIXES OR SUPPORTS WILL BE MADE AVAILABLE FOR THE SOFTWARE. 7. NO WARRANTY AND DISCLAIMER OF INDEMNITY [NO WARRANTY] THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH YOU. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. SOME STATES OR LEGAL JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR JURISDICTION TO JURISDICTION. NEITHER CANON, CANON'S SUBSIDIARIES OR AFFILIATES, THEIR DISTRIBUTORS, OR DEALERS NOR CANON'S LICENSORS WARRANT THAT THE FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET YOUR REQUIREMENTS OR THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR FREE. [NO LIABILITY FOR DAMAGES] IN NO EVENT SHALL EITHER CANON, CANON'S SUBSIDIARIES OR AFFILIATES, THEIR DISTRIBUTORS DEALERS OR CANON'S LICENSORS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING WITHOUT LIMITATION, LOSS OF BUSINESS PROFITS, LOSS OF BUSINESS INFORMATION, LOSS OF BUSINESS INTERRUPTION OR OTHER COMPENSATORY, INCIDENTAL OR CONSEQUENTIAL DAMAGES) ARISING OUT OF THE SOFTWARE, USE THEREOF OR INABILITY TO USE THE SOFTWARE EVEN IF EITHER CANON, CANON'S SUBSIDIARIES OR AFFILIATES, THEIR DISTRIBUTORS, DEALERS OR CANON'S LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES OR LEGAL JURISDICTIONS DO NOT ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR PERSONAL INJURY OR DEATH RESULTING FROM NEGLIGENCE ON THE PART OF SELLER, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. [RELEASE OF LIABILITY] TO THE FULL EXTENT PERMITTED BY APPLICABLE LAW, YOU HEREBY RELEASE CANON, CANON'S SUBSIDIARIES AND AFFILIATES, THEIR DISTRIBUTORS, DEALERS AND CANON'S LICENSORS FROM ANY AND ALL LIABILITY ARISING FROM OR RELATED TO ALL CLAIMS CONCERNING THE SOFTWARE OR ITS USE. 8. TERM This Agreement is effective upon your acceptance hereof by clicking the button indicating your acceptance as stated below or using the Software and remains in effect until terminated. You may terminate this Agreement by destroying the Software including any and all copies thereof. This Agreement shall also terminate if you fail to comply with any terms hereof. Upon termination of this Agreement, in addition to Canon enforcing its respective legal rights, you must then promptly destroy the Software including any and all copies thereof. Notwithstanding the foregoing, Sections 4, and 7 through 11 shall survive any termination of this Agreement. 9. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE The Software is a "commercial item," as that term is defined at 48 C.F.R. 2.101 (October 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212 (September 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S. Government End Users shall acquire the Software with only those rights set forth herein. Manufacturer is Canon Inc./ 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan. 10. SEVERABILITY In the event that any section hereof is declared or found to be illegal by any court or tribunal of competent jurisdiction, such section shall be null and void with respect to the jurisdiction of that court or tribunal and all the remaining provisions hereof shall remain in full force and effect. 11. ACKNOWLEDGEMENT BY CLICKING THE BUTTON INDICATING YOUR ACCEPTANCE AS STATED BELOW OR USING THE SOFTWARE, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTOOD IT, AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU ALSO AGREE THAT THIS AGREEMENT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN YOU AND CANON CONCERNING THE SUBJECT MATTER HEREOF AND SUPERSEDES ALL PROPOSALS OR PRIOR AGREEMENTS, VERBAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN YOU AND CANON RELATING TO THE SUBJECT MATTER HEREOF. NO AMENDMENT TO THIS AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY AUTHORISED REPRESENTATIVE OF CANON. Should you have any questions concerning this Agreement, or if you desire to contact Canon for any reason, please write to Canon's sales subsidiary or distributor/dealer, serving the country where you obtained the Products. ************************************************************************** Copyright 2008 Canon, Inc. Windows 2000/XP/Server 2003/Vista/Server2008 Fax Driver - Version 5.30 ************************************************************************** This README file contains supplemental information to help you install and use your fax driver software with Microsoft Windows 2000, Windows XP, Windows Server 2003, Windows Vista and Windows Server 2008. As with most software and hardware products, some information is made available after the development of the manual. Updated information regarding this driver software is provided in this README file. If you require additional assistance, please contact your local Canon company. Windows and Windows Vista are trademarks of Microsoft Corporation in the United States and other countries. Citrix, MetaFrame, and MetaFrame XP are trademarks of Citrix Systems, Inc. in the United States and other countries. PCL is a trademark of Hewlette-Packard Company. CONTENTS ======== Overview System Requirements Installing the Fax Driver Accessing Help Information Cautions, Limitations and Restrictions Overview ======== This fax driver allows you to send a fax from any Windows 2000/XP/Server 2003/ Vista/Windows Server 2008 application to a remote fax machine if your machine contains an optional fax board. System Requirements =================== The Canon Fax Driver can be used in the following system environments: * Operating System Software Microsoft Windows 2000 Microsoft Windows XP Microsoft Windows Server 2003 Microsoft Windows Vista Microsoft Windows Server 2008 * With Server-Based Computing Environment - Compatible Windows Terminal Server (Service) Microsoft Windows 2000 Server Microsoft Windows Server 2003 Microsoft Windows Server 2008 - Compatible Software Citrix MetaFrame XP Citrix MetaFrame 1.8 Citrix MetaFrame Presentation Server 3.0 Citrix Presentation Server 4.0 Citrix Presentation Server 4.5 * Computer Any computer which runs the above operating system software properly. However, at least one of the following output ports is required: - parallel printer port (LPT1, LPT2, etc.) - USB port - network interface Installing the Fax Driver ========================= To use this fax driver with software applications that operate with Microsoft Windows 2000/XP/Server 2003/Vista/Server 2008, use the following installation procedure. Note ---- * If you use a SMB (NetBIOS network) printer as a shared printer on the server PC, use the Add Printer Wizard, and select "Network printer" when installing the fax driver. * If you log on Windows as a Power User and run the installer, the installation may not be completed correctly. In this case, log in as an Administrator, and then retry the installation. * If a message prompting you to restart your computer is displayed when using the installer, make sure to restart your computer. If you do not restart your computer, existing drivers may not operate correctly. * If you are using the printer auto-creation mechanism in a MetaFrame environment, you may not be able to correctly install this driver using the Installer. If so, restart the MetaFrame Server PC and check the Printers folder (Printers and Faxes folder in Windows XP/ Server 2003/Vista). If any existing printer icons are no longer displayed, re-install the relevant fax drivers in the MetaFrame Server PC using the Add Printer Wizard in the Printers folder. Then, before starting the Installer to install this driver, disconnect all client printers from all the ICA sessions using the ICA Client Printer Configuration utility. After installing the driver, restart the ICA Client Printer Configuration utility and reconnect the printers. To install using the Installer: 1. Insert the Fax Driver Software CD-ROM into the CD-ROM drive. 2. Double-click the My Computer icon, and then double-click the CD-ROM drive icon. 3. Double-click the FAX, and us_eng folder icons, and then double-click the Setup.exe icon to start the installation process. 4. In the first dialog box of the Fax Driver Setup Wizard, click the Next button, and then follow the instructions on the screen. 5. Select Manually Set Port to Install, and then click the Next button. 6. If the dialog box to select items to install is displayed, select Raster/ PCL5e Fax Driver and click the Next button. 7. If the dialog box to select how to execute the setup is displayed, select Add Faxes, or Add Faxes and Update Drivers and click the Next button. 8. Click the Add/Remove button to select the driver you want to install. 9. Check that the driver you want to install is selected in the Fax Driver Setup Wizard dialog box. Then click the Next button. 10.Select a Port from drop-down menu or by clicking the Add Port button. Then click the Next button. 11.In the next dialog box, check the installation settings, and then click the Start button. 12.After the files are copied, click the Exit button to finish the installation program. You are now ready to print from any Windows software application. Note: * If you copy the files in the fax setup folder in the CD-ROM to the hard disk on your PC and then do the installation, change the properties of the "instdrv.ini" and "uninst.ini" files following the procedure below: Right-click the file and select Properties, clear the Read-only check box, and then select the Archive check box. * If you are using a shared printer in the Print Server (Point and Print) environment, it is necessary to install Canon Driver Information Assist Service in the server PC in order to set up the printer configuration automatically or to use the Job Accounting feature. * If you are using an operating system equipped with Windows Firewall, a message which asks if you want to change the Windows Firewall setting is displayed during the installation. - If you select Yes, Windows Firewall will be configured to unblock the connection for Canon Driver Information Assist Service, so that you can set up the printer configuration automatically or use the Job Accounting feature. - If you select No, you cannot use Canon Driver Information Assist Service. To install using the Add Printer Wizard: 1. Click the Start button, point to Settings, and then click Printers. * If you are using Windows XP Professional/Server 2003, click the Start button, and then click Printers and Faxes. * If you are using Windows XP Home Edition, click the Start button, point to Control Panel and Printers and Other Hardware, and then click Printers and Faxes. * If you are using Windows Vista/Server 2008, click the Start button, point to Control Panel, and then click Printers. 2. In the Printers folder, double-click the Add Printer icon to start the Add Printer Wizard. 3. Confirm the Wizard is started, and then click the Next button. 4. Follow the instructions on the screen to continue with the installation. 5. Insert the Fax Driver Software CD into the CD-ROM drive, and then click the Have Disk button. 6. Click the Browse button to select the folder of the driver you want to install, and then click the OK button. Windows 2000/XP/Server 2003/Vista/Server2008: \FAX\us_eng\32BIT\win2k_vista 7. Select your fax model from Printers, and then click the Next button. 8. Follow the instructions on the screen to continue, and then click the Finish button to start copying the files. You are now ready to send a fax from any Windows software application. Accessing Help Information ========================== You can locate additional help for questions you may have regarding your fax in the Online Help file provided with the driver. In the fax properties dialog box, you can click [Help] to display additional information about every feature and option in the fax driver. Cautions, Limitations and Restrictions ====================================== 1. Custom paper sizes are not available for sending a fax. 2. Do not specify more than 1 for the Copies option in the application since the fax may be sent more than once in some applications when the Copies option is specified in the application. 3. Specify a NetWare Server name or NDS tree name up to 15 characters. 4. For Windows 2000/XP/Server 2003/Vista/Server 2008 when installing with Add Printer from the Printer Folder, the Cannot find Digital Signature message may appear. If this message appears, continue with the installation. The fax driver will install correctly. 5. When using Terminal Server for Windows 2000, or sharing Windows XP/Server 2003/Vista/Server 2008 by multiple users, it is not available to use the Job Accounting feature or set up printer configuration automatically. 6. For Windows XP/Server 2003/Vista, it is necessary to use TCP/IP as a network protocol in order to set up the printer configuration automatically when using a Remote Desktop environment, or when Windows is shared by multiple users. 7. When using the Job Accounting feature under the NetWare environment, it is not available to verify the ID and password even if the Confirm ID/Password when Sending Fax check box is selected in the ID/Password Settings dialog box. Thus, you cannot send a fax if the specified ID and password are invalid. 8. For the iR330-400, only System Version 2.0 (or later) is supported by the fax driver version 1.2 (or later). 9. If double quotation marks or CSV separators are included in any of the items (Such as name and fax numbers) stored in a CSV file, the addresses stored in the file may not be imported to the address book correctly. 10.If you have upgraded your operating system from Windows 2000/XP/Server 2003 to Windows Vista, you will no longer be able to access the address book. If this is the case, perform the following procedure. 1. Copy the address book files (gpfax.adr and gpfax.idx) from the system folder (the default system folder is "C:\Windows") to another folder (e.g. "My Documents"). This step can be carried out before or after you upgrade the system. 2. After you have upgraded the system, reinstall the fax driver in the new system, open the [Edit Address Book] sheet, click the [Specify a folder] button, and choose the folder you copied the address book files to in step 1 (e.g. "My Documents") as the address book folder. 3. Click the [Yes] button in the following dialog box. 11.If double quotation marks are included in any of the items (Such as names and fax numbers) stored in an ABK file (*.abk), the addresses stored in the file may not be imported to the address book correctly. 12.When an "@" character is used in the name of the printer, the printer will become unrecognizable by the operating system because of an invalid printer name thus disabling printing, operation and setup. 13.When you log on to an Administrator account that is different from the one used to install the software, you will not be able to access the driver properties with Administrator privileges. To access the driver properties, select [Run as Administrator]. 14.In certain applications, thickness of a line can be set to a value smaller than 1pt but the actual thickness in the printout may be equivalent to that of an 1pt line. 15.For Windows Server 2008 installed with Server Core option, the following limitations exist on using the fax driver. -You cannot install the driver with the installer. Use the installation options of Windows. -Some fax options are not available under local environment or Windows Remote Desktop environment. <END OF README.TXT>Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.