[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SIS7018]
"Prefix"="WAV"
"Dll"="sis7018.dll"
"Index"=dword:1
"Order"=dword:0
;Set the codec value (volume, selection)
"MasterVol"=dword:0
"MasterVolMono"=dword:808
"PhoneVol"=dword:8
"PcBeepVol"=dword:8000
"MicVol"=dword:8048
"LineInVol"=dword:808
; "LineInVol"=dword:8808 set default vol to 0
"CDVol"=dword:808
"VideoVol"=dword:8808
"AuxVol"=dword:8808
"PcmOutVol"=dword:808
"RecordSel"=dword:0
"RecordGain"=dword:0
"GeneralPurpose"=dword:200
[HKEY_LOCAL_MACHINE\Comm\SIS900]
"DisplayName"="SiS900 10/100Mbps LAN card"
"Group"="NDIS"
"ImagePath"="SIS900.dll"
[HKEY_LOCAL_MACHINE\Comm\SIS900\Linkage]
"Route"=multi_sz:"SIS9001"
[HKEY_LOCAL_MACHINE\Comm\SIS9001]
"DisplayName"="SiS900 10/100Mbps LAN card 1"
"Group"="NDIS"
"ImagePath"="SIS900.dll"
[HKEY_LOCAL_MACHINE\Comm\SIS9001\Parms]
"BusNumber"=dword:0
"BusType"=dword:5
"Transceiver"=dword:3
"CardType"=dword:1
[HKEY_LOCAL_MACHINE\Comm\Tcpip\Linkage]
; This should be MULTI_SZ
; This is the list of llip drivers to load
"Bind"=multi_sz:"ppp","SIS9001"
[HKEY_LOCAL_MACHINE\Comm\SIS9001\Parms\TcpIp]
"EnableDHCP"=dword:1
; This should be MULTI_SZ
"DefaultGateway"=""
; Use zero for broadcast address? (or 255.255.255.255)
"UseZeroBroadcast"=dword:0
; Thus should be MULTI_SZ, the IP address list
"IpAddress"="0.0.0.0"
; This should be MULTI_SZ, the subnet masks for the above IP addresses
"Subnetmask"="0.0.0.0"
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SISIDE0]
"Index"=dword:1
"Dll"="siside.dll"
"Prefix"="DSK"
"Order"=dword:1
"Ioctl"=dword:4
"FSD"="FATFS.DLL"
"Folder"="DSK1"
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SISIDE1]
"Index"=dword:2
"Dll"="siside.dll"
"Prefix"="DSK"
"Order"=dword:2
"Ioctl"=dword:4
"FSD"="FATFS.DLL"
"Folder"="DSK1"
"SetFeature"=dword:0
"DMAmode"=dword:2
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SISIDE2]
"Index"=dword:3
"Dll"="siside.dll"
"Prefix"="DSK"
"Order"=dword:3
"Ioctl"=dword:4
"FSD"="FATFS.DLL"
"Folder"="DSK1"
; "SetFeature"=dword:2
; "SetFeature"=dword:0
; "DMAmode"=dword:2
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SISIDE3]
"Index"=dword:4
"Dll"="siside.dll"
"Prefix"="DSK"
"Order"=dword:4
"Ioctl"=dword:4
"FSD"="FATFS.DLL"
"Folder"="DSK1"
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings]
IF WINCESHIP !
"ProxyEnable"=dword:0
"ProxyServer"="itgproxy:80"
"ProxyOverride"="<local>"
ENDIF
"EnableAutodial"=dword:0
[HKEY_LOCAL_MACHINE\SYSTEM\SIS]
"Version"="SIS CE Version 1.0"
"Chipset"="SIS630"
"AgpMemAddr"=dword:80200000
"AgpSize"=dword:300000
;DVD setting
[HKEY_LOCAL_MACHINE\SOFTWARE\InterVideo\WinDVD]
"SIS_MPEG1_NOHWMC"=dword:1 ; use software codec to handle MPEG1
"DIRECTSOUND"=dword:0 ; use waveout api
"CDROMFOLDER"="/DSK2" ; folder name specified in pathes to CD
"CDROMDEVICE"="DSK2:" ; device name used in DeviceIoControl
"PRIORITYD"=dword:1 ; priority of demux thread
"PRIORITYA"=dword:2 ; priority of audio thread
"PRIORITYV"=dword:3 ; priority of video thread
"PRIORITYS"=dword:3 ; priority of subpic thread
"REGION"=dword:3 ; current region setting
"REGIONCOUNT"=dword:5 ; remained region change times
"FULLSCREEN" = dword:1 ; 1:FullScreen 0:Windows
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.