1. 07._CardReader_JMicro_V1.00.11.02_WHQL.zip Driver
2. setup.ini File Contents

setup.ini Driver File Contents (07._CardReader_JMicro_V1.00.11.02_WHQL.zip)

[Startup]
AppName=JMicron JMB38X Flash Media Controller
ProductGUID=26604C7E-A313-4D12-867F-7C6E7820BE4C
CompanyName=JMicron Technology Corp.
ErrorReportURL=http://www.installshield.com/isetup/ProErrorCentral.asp?ErrorCode=%d : 0x%x&ErrorInfo=%s
MediaFormat=0
LogMode=1
Skin=setup.isn
Resource=_Setup.dll
SmallProgress=N
SplashTime=5
CheckMD5=Y
CmdLine=
ShowPasswordDialog=N
EngineVersion=11.0.0.28844
EngineBinding=1
[Languages]
Default=0x0009
count=10
key0=0x0804
key1=0x0404
key2=0x0009
key3=0x040c
key4=0x0007
key5=0x0010
key6=0x0011
key7=0x0012
key8=0x0019
key9=0x000a
RequireExactLangMatch=0x0804,0x0404

[Install_Setting]
;Customize INF file name
InfName=jmcr_ns.inf

;Customize INF file name for support SDIO card
SupportSDIOInfName=jmcr.inf
;Customize the default value of "SupportSDIOCard", "0" indicate NOT support
DefaultSupportSDIOCard=0
;Customize to show the dialog for user to select "SupportSDIOCard", "0" indicate NOT show
ShowSelectSDIODialog=0

;  If SupportDriverPreInstall = 1, indicate that "support driver preinstall" (but only valid for WHQL driver). Otherwise, indicate NOT support.
SupportDriverPreInstall=0

;  If RebootNotRequiredAfterSetupDriver = 1, indicate that "Reboot is NOT required after driver setup". Otherwise, reboot is required.
RebootNotRequiredAfterSetupDriver=1

; Write some registries to set Disk Icon 
SetDiskIconRegistry=1

;  CustomizedSettingCount indicate "the total number of CustomizedSetting".
CustomizedSettingCount=11

; [CustomizedSettings Definition]
;  CustomizedSetting1:  Customized Setting Flag. Bit Defintion would be appened later
;  CustomizedSetting2:  LED Pulse Width. DWord value.
;  CustomizedSetting3:  SD/MMC Slot A Pull-High/Pull-Low Setting
;  CustomizedSetting4:  SD/MMC Slot B Pull-High/Pull-Low Setting
;  CustomizedSetting5:  MS Slot A Pull-High/Pull-Low Setting
;  CustomizedSetting6:  MS Slot B Pull-High/Pull-Low Setting
;  CustomizedSetting7:  XD Pull-High/Pull-Low Setting
;  CustomizedSetting8:  SD/MMC Timing Delay Setting
;  CustomizedSetting9:  MS Timing Delay Setting
;  CustomizedSetting10: IC Driving Setting
;  CustomizedSetting11: D3E Waiting Minutes (Max 65535)

; [CustomizedSetting1 Bit Definition]
;  D[5]: Support D3E          (0x00000020) // Need BIOS Supporting

CustomizedSetting1=0x00000020
CustomizedSetting2=0x4000
CustomizedSetting3=0x50800F1F
CustomizedSetting4=0x00000F1F
CustomizedSetting5=0x5f8f0000
CustomizedSetting6=0x0f0f0000
CustomizedSetting7=0x4F8F1030
CustomizedSetting8=0x000337a3
CustomizedSetting9=0x00004000
CustomizedSetting10=0x01020101
CustomizedSetting11=0x00000005

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.