OEMSETUP.INF Driver File Contents (amdpcnet.exe)

;***********************************************************************
;
; OEMSETUP.INF
;
;       AMD PCnet Family INF for Novell ODI drivers
;
;
; Version=1.00 Novell Client Install for Windows NT.
; Copyright=(c) Copyright 1996, by AMD, Inc. All rights reserved.
;***********************************************************************

[Identification]
	OptionType = NetAdapter

[PlatformsSupported]
	ISA
	EISA
	PCI
	"Jazz-Internal Bus"

[LanguagesSupported]
	ENG

[FileConstants]

UtilityInf              = "UTILITY.INF"
ParamInf                = "NCPARAM.INF"
subroutineinf           = "SUBROUTN.INF"
NwSubsInf               = "NWSUBS.INF"
Exit_Code               = 0

NetEventDLL      = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL      = "%SystemRoot%\System32\IoLogMsg.dll"

Manufacturer            = "Novell"
ProductMajorVersion     = "1"
ProductMinorVersion     = "0"
ProductVersion          = $(ProductMajorVersion)"."$(ProductMinorVersion)
DriverName              = "OdiLoad"
OdiModules              = "ODI_Modules"


NetRuleHardwareType               = "nwDriver nwAdapter"
NetRuleHardwareBindForm   = " yes yes container"
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(DriverName)"\CurrentVersion"
;
; ParamKeyname not used - not updated
; ParamKeyName  = $(!NTN_ServiceBase)"\"$(ProductHardware$(Option)Name)"\Parameters"
;

[GeneralConstants]
from    = ""
to              = ""
ExitCodeOk              = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2

KeyNull                         = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct                      = ""
KeyParameters           = ""

TRUE                    = 1
FALSE                   = 0
NoTitle         = 0

ExitState       = "Active"
OldVersionExisted = $(FALSE)

DriverPath        = $(!STF_NTPATH)\netware

[ODIParameters]
	ODINodeAddress = ""
	ODIDriverAdditionalParms = {}
	ODICustomList = {}
	ODITokenRing            = ""
	ODITokenRingSnap        = ""
	;
	; File specific Parameters:
	;   ISA LAN Driver file:
	;               ODISlotList = {}
	;               ODIDefaultSlot = ""
	;        MCA and EISA LAN Driver files:
	;               ODISlotList = {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16}
	;               ODIDefaultSlot = "2"
	;
	ODISlotList = {}
	ODIDefaultSlot = ""

[date]
	Now = {} ? $(!LIBHANDLE) GetSystemDate


[Identify]

	read-syms Identification

	set Status              = STATUS_SUCCESSFUL
	set Identifier  = $(OptionType)
	set Media               = #("Source Media Descriptions", 1, 1)

	Return $(Status) $(Identifier) $(Media)

[ReturnOptions]

	read-syms ODIStrings$(!STF_LANGUAGE)

	set Status              = STATUS_FAILED
	set OptionList   = {}
	set OptionTextList = {}

	set LanguageList = ^(LanguagesSupported, 1)
	Ifcontains(i) $($0) in $(LanguageList)
		ifstr(i) $($1) == ""
			goto returnoptions
		endif

		set PlatformList = ^(PlatformsSupported, 1)
		Ifcontains(i) $($1) in $(PlatformList)
			goto returnoptions
		else
			set Status = STATUS_NOTSUPPORTED
			goto finish_ReturnOptions
		endif
	else
		set Status = STATUS_NOLANGUAGE
		goto finish_ReturnOptions
	endif

returnoptions = +
	set OptionList   = ^(Options, 1)
	set OptionTextList = {}

	ForListDo $(OptionList)
		set OptionTempString = " ODI "#($($),Title,1)$(AdapterForNetWare)
		set OptionTextList = >($(OptionTextList), $(OptionTempString) )
	EndForListDo

	set Status               = STATUS_SUCCESSFUL

Debug-Output "OEMSETUP.INF-[finish_ReturnOptions]:"
Debug-Output "OEMSETUP.INF-          Status = "$(Status)
Debug-Output "OEMSETUP.INF-      OptionList = "$(OptionList)
Debug-Output "OEMSETUP.INF-  OptionTextList = "$(OptionTextList)

finish_ReturnOptions = +
	Return $(Status) $(OptionList) $(OptionTextList)

[InstallOption]

	set Option      = $($1)
	set SrcDir      = $($2)
	set AddCopy  = $($3)
	set DoCopy      = $($4)
	set DoConfig = $($5)
	set NdisDriverParameters = $($6)
	set OldSrcDir = $($2)

	set LanguageList = ^(LanguagesSupported, 1)
	Ifcontains(i) $($0) NOT-IN $(LanguageList)
		Return STATUS_NOLANGUAGE
	endif

	set-subst LF = "\n"
	read-syms GeneralConstants
	read-syms FileConstants
	read-syms ODIParameters
	read-syms DialogConstants$(!STF_LANGUAGE)
	read-syms ODIStrings$(!STF_LANGUAGE)
	ifstr(i) $(!NTN_Origination) == "NCPA"
		set Continue = "OK"
	endif
	read-syms FileConstants$(!STF_LANGUAGE)

	detect date

;       set-title  $(Function$(Option)Title)

	set to  = Begin
	set from = Begin
	set CommonStatus = STATUS_SUCCESSFUL
	

	EndWait

Begin = +

	set CurrentInstallMode = ""
	Ifstr(i) $(!NTN_InstallMode) == deinstall
		set StartLabel = removeadapter
		goto skipmakingthelists
	else-Ifstr(i) $(!NTN_InstallMode) == Update
		set StartLabel = UpgradeSoftware
		set CurrentInstallMode = configure
		set DoCopy = YES
		set AddCopy = YES
	else-Ifstr(i) $(!NTN_InstallMode) == bind
		set StartLabel = bindingadapter
		goto skipmakingthelists
	else-Ifstr(i) $(!NTN_InstallMode) == configure
		set StartLabel = configureadapter
		set CurrentInstallMode = configure
	else
		set DoCopy = YES
		set AddCopy = YES
		set StartLabel = installadapter
		set OEM_ABANDON_OPTIONS = {}
		set OEM_ABANDON_SOFTWARE = FALSE
		set OEM_ABANDON_ON = TRUE
	endif

	set ParameterListNames = ^(DefaultParameterLists, 1)    ; NWIRQList, NWMEMList1, etc.
	set ListNames = ^(ODIListNamesSection, 1)                                       ; List1, list2, ..., list6
	set ODIKeywordList = ^(ChoicesNamesList, 1)                             ; Int, mem, Port, etc.
	set ODITitleList = ^(ChoicesNamesList, 2)                                       ; Interrupt Number, Port, etc.
	set MSParameterList = ^(ChoicesNamesList, 3)                            ; InterruptNumber, IOBaseAddress, etc.

	set DriverListNames = {}
	set ODINumberofDriverLists = 0
	ForListDo ^($(Option),0 )
		ifcontains(i) $($) IN $(ListNames)
			set DriverListNames = >($(DriverListNames), $($))
		else-ifstr(i) $($) == "CUSTOM"
			set ODICustomList = #($(Option), Custom, 1)
		endif
	EndForListDo

	QueryListSize ODINumberofDriverLists $(DriverListNames)

;
; DriverListNames now contains the List names the selected ODI driver has (i.e. {List1, List2})
; ODINumberofDriverLists now contains the number of lists used
;

	Debug-Output "DriverListNames = "$(DriverListNames)
	Debug-Output "Size of DriverListNames = "$(ODINumberofDriverLists)

	ForListDo $(DriverListNames)
		set $($)Keyword = #($(Option), $($), 1)
		ifstr $($($)Keyword) != ""
			set $($)Default = #($(Option), $($), 3)

			ifcontains(i) $($($)Keyword) IN $(ODIKeywordList)
				set $($)Title = *($(ODITitleList), ~($(ODIKeywordList), $($($)Keyword)))
				set ThisListName = #($(Option), $($), 2)
				set MSParameterName$(#) = *($(MSParameterList), ~($(ODIKeywordList), $($($)Keyword)))
				set FinalList = {}

				ifcontains(i) $(ThisListName) IN $(ParameterListNames)
					ifstr(i) #($(Option), $($), 4) == "ALL"
						set FinalList = ^($(ThisListName), 1)
					else
						set CountUpTo = #($(Option), $($), 5)

						ifstr(i) $(CountUpTo) == "END"
							set CountUpTo = $(MAXIMUM_ALLOWED)
						endif

						set StartNumber = #($(Option), $($), 4))

						ForListDo ^($(ThisListName), 1)
							ifint $(#) >= $(StartNumber)
								ifint $(#) <= $(CountUpTo)
									set FinalList = >($(FinalList), $($))
								endif
							endif
						EndForListDo
					endif
				else
					;
					; User passed in the list
					;
					Debug-Output "User passed in a list"
					set $($)Title = #($(Option), $($), 2)
					set FinalList = #($(Option), $($), 4)
				endif
			else
				;
				; User passed in a new keyword
				;
				Debug-Output "User passed in a new keyword"
				set $($)Title = #($(Option), $($), 2)
				set MSParameterName$(#) = ""
				set FinalList = #($(Option), $($), 4)
			endif
		set $($)List = $(FinalList)
		endif
	Debug-Output "List"$(#)"Title = "$($($)Title)
	Debug-Output "List"$(#)"Default = "$($($)Default)
	Debug-Output "List"$(#)"Keyword = "$($($)Keyword)
	Debug-Output "List"$(#)"List = "$($($)List)
	Debug-Output "MSParameterName"$(#)" = "$(MSParameterName$(#))

;If statement has been added to combine 2 Inf files.
;The following instructions are only for the ISA.

	Ifstr(i) $(Option) != "ODI_PCNETPCI"
	
		;
		; Get the card settings from the Ndis driver service
		;
		Ifstr(i) $(NdisDriverParameters) != ""
			set FoundValueName = "FALSE"
			set ListNameDefault = $($)Default
			set NdisParameterName = $(MSParameterName$(#))
			ForListDo $(NdisDriverParameters)
				set ValueList = $($)
				Debug-Output "ValueList = "$(ValueList)
				Ifstr(i) $(FoundValueName) == "FALSE"
					set NdisValueName = *($(ValueList), 1)
					Debug-Output "NdisValueName = "$(NdisValueName)
					Ifstr(i) $(NdisValueName) == $(NdisParameterName)
						Ifstr(i) $(NdisValueName) == "IOBaseAddress"
							set-dectohex $(ListNameDefault) = *($(ValueList), 4)
							Split-String $($(ListNameDefault)) "x" SplitList
							set $(ListNameDefault) = *($(SplitList), 3)
						else-ifstr(i) $(NdisValueName) == "MemoryMappedBaseAddress"
							set-dectohex $(ListNameDefault) = *($(ValueList), 4)
							Split-String $($(ListNameDefault)) "x" SplitList
							set $(ListNameDefault) = *($(SplitList), 3)
						else
							set $(ListNameDefault) = *($(ValueList), 4)
						Endif
						set FoundValueName = "TRUE"
						Debug-Output "NEW: "$(ListNameDefault)" = "$($(ListNameDefault))
					Endif
				Endif
			EndForListDo
		Endif


	Endif
	
	EndForListDo

skipmakingthelists = +

	Debug-Output "Starting skipmakingthelist"
	set ODILANDriverTitle = #($(Option), Title, 1)
	Split-String #($(Option), DriverName, 2) "." SplitFileNameList
	set ODILANDriverName = *($(SplitFileNameList), 1)
	set ODIMediaType = #($(Option), MediaType, 1)

;If statement has been added to combine 2 Inf files.
;The following instructions are only for the PCI.

	Ifstr(i) $(Option) == "ODI_PCNETPCI"
		set ODICardType = #($(Option), CardType, 1)
		set ODICardId = #($(Option), CardId, 1)
		ifstr(i) $(ODICardType) == "PCI"
			set ODIVendor = #($(Option), Vendor, 1)
		endif
		ifstr(i) #($(Option), CanShareSlot, 1) == "YES"
			set SkipDescriptionCheck = "NO"
		else
			set SkipDescriptionCheck = "YES"
		endif
	Endif

	Debug-Output "ODILANDriverName = "$(ODILANDriverName)
	Debug-Output "ODIMediaType = "$(ODIMediaType)

	ifstr(i) $(ODIMediaType) == "ETHERNET"
		set NdisMediaType = "1"
	else-ifstr(i) $(ODIMediaType) == "TOKEN-RING"
		set NdisMediaType = "2"
	else-ifstr(i) $(ODIMediaType) == "FDDI"
		set NdisMediaType = "4"
	else
		Debug-Output "OEMSETUP.INF: Unknown media type "$(ODIMediaType)
		set NdisMediaType = ""
	endif

	set from = $(fatal)
	set to = $(fatal)
	goto $(StartLabel)

installadapter = +

	Ifstr(i) $(DoCopy) == "YES"
		;
		;  Get source location
		;
		Shell $(NwSubsInf), DoAskLANSource, $(!STF_CWDDIR), $(SrcDir) YES

		Ifint $($ShellCode) != $(!SHELL_CODE_OK)
			Goto ShellCodeError
		Else-Ifstr(i) $($R0) == STATUS_FAILED
			Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
			ifint $($ShellCode) != $(!SHELL_CODE_OK)
				goto ShellCodeError
			endif
			set Error = $($R0)
			Goto fatal
		Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
			Goto end
		Endif

		Set SrcDir = $($R1)
	Endif

	install "Install-Option"

	goto adapteroptions

configureadapter = +
	Debug-Output "Starting configureadapter."
	Ifstr $(KeyProduct) == $(KeyNull)
		OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
		Ifstr $(KeyProduct) == $(KeyNull)
			set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
			Debug-Output "OEMSETUP.INF: Cannot find component product key "$(!NTN_RegBase)
			goto fatalregistry
		Endif
	Endif

	Set AdapterNumber = ""

	Shell $(UtilityInf) FindService, $(KeyProduct)
	Ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "OEMSETUP.INF: FindService shell failure "$($ShellCode)
		Goto ShellCodeError
	Endif
	Ifstr(i) $($R0) != NO_ERROR
		Debug-Output "OEMSETUP.INF: FindService Error "$($R0)
		Goto fatalregistry
	endif

	set KeyParameters = $($R2)
	set ServiceAreaHandle = $($R1)

	Ifstr $(KeyParameters) == $(KeyNull)
		set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
		Debug-Output "OEMSETUP.INF: Cannot find component service "$(KeyProduct)
		goto fatalregistry
	endif

	set OldVersionExisted = $(TRUE)

	set ValueName = ""
	set ValueData = ""
	set ValueStr  = ""
	set ValueList = {}

	GetRegValue $(KeyParameters) ODILoadName ODILoadName
	Set CardInstanceName = *($(ODILoadName),4)

	Ifstr $(CardInstanceName) == $(KeyNull)
		set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
		Debug-Output "OEMSETUP.INF: Cannot find CardInstanceName"
		goto fatalregistry
	endif

	set KeyToFind = $(!NTN_ServiceBase)"\ODILOAD\ODI_MODULES\"$(CardInstanceName)
	OpenRegKey $(!REG_H_LOCAL) ""  $(KeyToFind) $(MAXIMUM_ALLOWED) DriverKey
	Ifstr $(DriverKey) == $(KeyNull)
		set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
		Debug-Output "OEMSETUP.INF: Cannot find component product key = "$(KeyToFind)
		goto fatalregistry
	Endif

	GetRegValue $(DriverKey) Parameters ParameterList

	;  get the data portion
	set ParameterList = *($(ParameterList), 4)

	Debug-Output "parameter list = "$(ParameterList)

	ForListDo $(ParameterList)
		set ThisParameterList = $($)
		Split-String $($) " " SplitList
		set KeyToSearchFor = *($(SplitList), 1)
		set ValueToUse = *($(SplitList), 3)
		Debug-Output "Keytosearchfor = "$(KeyToSearchFor)
		Debug-Output "ValueToUse = "$(ValueToUse)
		;
		;   #1    #2     #3
		; "Parm"  " "    "Value"
		;
		set ValueFound = 0

		;
		; check frametypes for TOKEN-RING, TOKEN-RING_SNAP
		;
		ifstr(i) $(KeyToSearchFor) == "FRAME"
			;
			; Don't append Frametypes to ODIAdditionalParms, so set ValueFound = 1
			;
			set ValueFound = 1
			QueryListSize SplitListSize $(SplitList)
			ifstr(i) *($(SplitList), 3) == "TOKEN-RING"
				set LastParameter = *($(SplitList), $(SplitListSize))
				ifstr(i) $(LastParameter) == "MSB"
					set ODITokenRing = "MSB"
				else-ifstr(i) $(LastParameter) == "LSB"
					set ODITokenRing = "LSB"
				else
					;
					; Not there, so default to MSB
					;
					set ODITokenRing = "MSB"
				endif
			else-ifstr(i) *($(SplitList), 3) == "TOKEN-RING_SNAP"
				set LastParameter = *($(SplitList), $(SplitListSize))
				ifstr(i) $(LastParameter) == "MSB"
					set ODITokenRingSnap = "MSB"
				else-ifstr(i) $(LastParameter) == "LSB"
					set ODITokenRingSnap = "LSB"
				else
					;
					; Not there, so default to MSB
					;
					set ODITokenRingSnap = "MSB"
				endif
			endif
		;
		; Check for NODE parameter
		;
		else-ifstr(i) $(KeyToSearchFor) == "NODE"
			set ODINodeAddress = $(ValueToUse)
			set ValueFound = 1
		;
		; Check for SLOT parameter
		;
		else-ifstr(i) $(KeyToSearchFor) == "SLOT"
			set ODIDefaultSlot = $(ValueToUse)
			set ValueFound = 1
		;
		; Check for BUSNAME parameter - ignore it
		;
		else-ifstr(i) $(KeyToSearchFor) == "BUSNAME"
			set ValueFound = 1
		;
		; Check for BUSTYPE parameter
		;
		else-ifstr(i) $(KeyToSearchFor) == "BUSTYPE"
			set ValueFound = 1
			set BusInterfaceType = $(ValueToUse)
		;
		; Check for BUS parameter
		;
		else-ifstr(i) $(KeyToSearchFor) == "BUS"
			set ValueFound = 1
			set BusNumber = $(ValueToUse)
		endif

		ForListDo $(DriverListNames)
			ifstr(i) $(KeyToSearchFor) == $($($)Keyword)
				set $($)Default = $(ValueToUse)
				set ValueFound = 1
				ifcontains(i) $(ValueToUse) NOT-IN $($($)List)
					set $($)List = >($($($)List), $(ValueToUse))
				endif
			endif
		EndForListDo

		Debug-Output "Value Found = "$(ValueFound)

		ifint $(ValueFound) == 0
			set FoundInCustom = 0

			ForListDo $(ODICustomList)
				ifstr(i) $($) == $(ThisParameterList)
					set FoundInCustom = 1
				endif
			EndForListDo

			Debug-Output "Found in Custom = "$(FoundInCustom)

			ifint $(FoundInCustom) == 0
				ifstr $(ODIDriverAdditionalParms) == {}
					set ODIDriverAdditionalParms = $(KeyToSearchFor)" "$(ValueToUse)
				else
					set ODIDriverAdditionalParms = >($(ODIDriverAdditionalParms), $(KeyToSearchFor)" "$(ValueToUse))
				endif
			endif
		endif
	EndForListDo

	Debug-Output "AdditionalParms = "$(ODIDriverAdditionalParms)
	Debug-Output "CustomList = "$(ODICustomList)
	Debug-Output "BusType = "$(BusInterfaceType)
	Debug-Output "Bus = "$(BusNumber)


adaptersetup =+

	goto adapteroptions
adapteroptions = +
	set from = adapteroptions

	;
	; Find what NLS directory is being used
	;

	set NovellParameters = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\Parameters"
	OpenRegKey $(!REG_H_LOCAL) "" $(NovellParameters) $(MAXIMUM_ALLOWED) KeyNovellParameters
	ifint $(RegLastError) == $(!REG_ERROR_SUCCESS)
		GetRegValue $(KeyNovellParameters) "NWLanguage" LanguageList
		ifint $(RegLastError) == $(!REG_ERROR_SUCCESS)
			set NLSDirName = *($(LanguageList), 4)
			LoadLibrary $(NetWareForWindowsNT) $(!STF_WINDOWSSYSPATH)"\nls\"$(NLSDirName)"\nwsetupr.dll" NwLibHandle
			SetHelpFile $(!STF_WINDOWSSYSPATH)"\nls\"$(NLSDirName)"\nwnthelp.hlp" $(!MinimumID) $(!MaximumID)
		else
			goto fatalregistry
		endif
		CloseRegKey $(KeyNovellParameters)
	else
		goto fatalregistry
	Endif

dothedialog = +
	Debug-Output "Start dothedialog."
	ifint $(ODINumberofDriverLists) == 0
		Debug-Output "ODINumberofDriveLists == 0."
		ifstr(i) $(CurrentInstallMode) == configure
			read-syms NoParms$(!STF_LANGUAGE)
			ui start "WorkstationDLG" $(NwLibHandle)

			ifstr(i) $(DLGEVENT) == "CONTINUE"
				Debug-Output "OK hit"
			else-ifstr(i) $(DLGEVENT) == "EXIT"
			;
			; user selected the advanced button
			;
				goto doadvancedsettings
			endif
		endif
	else
		Debug-Output "ODINumberofDriveLists != 0."
		read-syms LANDriverDlg$(!STF_LANGUAGE)

		set NotifyFields = {}
		set ComboListItemsIn = {}
		set ComboListItemsOut = {}
		ForListDo $(DriverListNames)
			set NotifyFields = >($(NotifyFields), "NO")
			set ComboListItemsIn = >($(ComboListItemsIn), $($)List)
			ifstr $($($)Value) == ""
				set $($)Value = $($($)Default)
			endif
			set ComboListItemsOut = >($(ComboListItemsOut), $($)Value)
		EndForListDo

		ui start "LANDriverParms" $(NwLibHandle)

		ifstr(i) $(DLGEVENT) == "CONTINUE"
			Debug-Output "Continue hit"
		else-ifstr(i) $(DLGEVENT) == "BACK"
			Debug-Output "Action: CANCEL. Bye."
			set CommonStatus = STATUS_USERCANCEL
			ui pop 1
			FreeLibrary $(NwLibHandle)
			goto end
		else-ifstr(i) $(DLGEVENT) == "EXIT"

doadvancedsettings =+
		;
		; user selected the advanced button
		;
			Debug-Output "Action: ADVANCED DIALOG"
			read-syms AdvancedDialog$(!STF_LANGUAGE)
			set RadioIn = {}
			set ComboListItemsIn = {}
			set ComboListItemsOut = {}
			set ComboOut = $(ODIDefaultSlot)

			ifstr(i) $(ODIMediaType) == "TOKEN-RING"
				ifstr(i) $(ODISlotList) == {}
					set DlgTemplate = "DLG_ADVANCEDDRIVER3"
				else
					set ComboListItemsIn = { ODISlotList }
					set ComboListItemsOut = { ComboOut }
					set DlgTemplate = "DLG_ADVANCEDDRIVER1"
				endif

				ifstr(i) $(ODITokenRing) == "LSB"
					set RadioIn = { 2 }
				else
					set RadioIn = { 1 }
				endif

				ifstr(i) $(ODITokenRingSnap) == "LSB"
					set RadioIn = >($(RadioIn), "4")
				else
					set RadioIn = >($(RadioIn), "3")
				endif
			else
				ifstr(i) $(ODISlotList) == {}
					set DlgTemplate = "DLG_ADVANCEDDRIVER4"
				else
					set ComboListItemsIn = { ODISlotList }
					set ComboListItemsOut = { ComboOut }
					set DlgTemplate = "DLG_ADVANCEDDRIVER2"
				endif
			endif

			ui start "AdvancedDialog" $(NwLibHandle)
			ui pop 1

			ifstr(i) $(DLGEVENT) == "CONTINUE"
				set ODINodeAddress = *($(EditTextOut), 1)
				set ODIDefaultSlot = *($(ComboOut), 1)
				ifcontains "2" IN $(RadioOut)
					set ODITokenRing = "LSB"
				else
					set ODITokenRing = "MSB"
				endif
				ifcontains "4" IN $(RadioOut)
					set ODITokenRingSnap = "LSB"
				else
					set ODITokenRingSnap = "MSB"
				endif
			else-ifstr(i) $(DLGEVENT) == "BACK"
				Debug-Output "Action: CANCEL. Bye."
			endif

			goto dothedialog
		else
			Debug-Output "Action: unknown. Bye."
			ui pop 1
			FreeLibrary $(NwLibHandle)
			goto end
		endif

		ui pop 1


		ForListDo $(DriverListNames)
			Debug-Output "List"$(#)"Value = "$($($)Value)
		EndForListDo
	endif

	Debug-Output "FreeLibrary $(NwLibHandle)"
	FreeLibrary $(NwLibHandle)

	ifint $(OldVersionExisted) == $(TRUE)
		ifstr(i) $(CurrentInstallMode) == configure
			Debug-Output "going to writeparameters based on OldVersionExisted."
			ifstr(i) $(Option) != "ODI_PCNETPCI"
				goto isawriteconfigureparameters
			else
				goto pciwriteconfigureparameters
			endif
		endif
	endif

	StartWait
	
	ifstr(i) $(Option) != "ODI_PCNETPCI"
		goto isawriteparameters
	else
		goto pciwriteparameters
	endif

pciwriteparameters = +
	Debug-Output "Starting writeparameters."

	Debug-Output "Calling GetPCIInformation."
	; Use the GetPCIInformation utiltiy to find the bus number and slot number
	; the adapter is installed in.
	set NTBusType = 5
	Shell $(UtilityInf), GetPCIInformation, $(ODIVendor) $(ODICardId)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		EndWait
		goto ShellCodeError
	endif
	set AdapterList = $($R0)

	set ProductHardwareDescription = +
		"ODI "$(ODILANDriverTitle)$(AdapterForNetWare)

	ForListDo $(AdapterList)
		; Steps need to be taken for multiple adapters of the same type.
		set NTBusNumber = *($($),1)
		set NTSlotNumber = *($($),2)


		Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(NTBusNumber), +
			$(NTSlotNumber), $(ProductHardwareDescription), +
			$(ODILANDriverName), $(SkipDescriptionCheck)
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		endif
		ifstr $($R0) != "NO_ERROR"
			set Error = $($R0)
			goto fatal
		endif
		ifstr(i) $($R1) != "YES"

			Debug-Output "Doing Shell AddHardwareComponent."

			Shell $(UtilityInf), AddHardwareComponent, $(ODILANDriverName),+
				$(STF_CONTEXTINFNAME),$(ProductKeyName)

			ifint $($R4) != -1
				Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS),+
				$(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
			endif


			ifint $($ShellCode) != $(!SHELL_CODE_OK)
				Debug-Output "OEMSETUP.INF:Cannot add hardware component "$($ShellCode)
				EndWait
				goto ShellCodeError
			endif

			set RegistryErrorIndex = $($R0)

			Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
				EndWait
				Debug-Output "OEMSETUP.INF: Registry error: add hardware component "$(RegistryErrorIndex)
				CloseRegKey $($R1)
				CloseRegKey $($R2)
				CloseRegKey $($R3)
				goto fatalregistry
			endif

			set KeyParameters = $($R3)
			set KeyAdapterRules = $($R2)
			set AdapterNumber = $($R4)

			Set-add TempAdapterNumber = $(AdapterNumber),0

			set CardInstanceName = $(ODILANDriverName)" #"$(TempAdapterNumber)

			set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),+
				$(Manufacturer)}, {Title,$(NoTitle),$(!REG_VT_SZ),+
				"["$($R4)"] ODI "$(ODILANDriverTitle)$(AdapterForNetWare)},+
				{Description,$(NoTitle),$(!REG_VT_SZ),+
					$(ProductHardwareDescription)},+
				{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ODILANDriverName)},+
				{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
				{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)},+
				{OdiAdapter,$(NoTitle),$(!REG_VT_DWORD),1}}

			Shell  $(UtilityInf), AddValueList, $($R1), $(NewValueList)
			ifint $($ShellCode) != $(!SHELL_CODE_OK)
				Debug-Output "OEMSETUP.INF: AddValueList ShellCode error "$($ShellCode)
				EndWait
				goto ShellCodeError
			endif

			CloseRegKey $($R1)

			set TempProdName = """"$(ODILANDriverName)$(AdapterNumber)""""
			set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)

			set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),+
				$(NetRuleHardwareType)},{bindform,$(NoTitle),$(!REG_VT_SZ),+
				$(TempBindForm)}, {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}

			Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
			ifint $($ShellCode) != $(!SHELL_CODE_OK)
				Debug-Output "OEMSETUP.INF: AddValueList ShellCode error "$($ShellCode)
				EndWait
				goto ShellCodeError
			endif

			set RegistryErrorIndex = $($R0)

			Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
				EndWait
				Debug-Output "OEMSETUP.INF: AddValueList Registry error "$(RegistryErrorIndex)
				CloseRegKey $(KeyParameters)
				CloseRegKey $(KeyAdapterRules)
				goto fatalregistry
			endif

			CloseRegKey $(KeyAdapterRules)

			SetRegValue $(KeyParameters) {OdiLoadName,$(NoTitle),$(!REG_VT_SZ),$(CardInstanceName)}
			SetRegValue $(KeyParameters) {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(NTBusNumber)}
			SetRegValue $(KeyParameters) {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(NTSlotNumber)}


pciwriteconfigureparameters = +
			; Jump to here if the drivers is already installed and specific driver
			; configuration was selected.

			ifstr(i) $(NdisMediaType) == ""
				set NdisMediaType = "1"
				Debug-Output "OEMSETUP.INF: Media type NOT set"
			endif

			set NewValueList = {{MediaType,$(NoTitle),$(!REG_VT_DWORD), +
				$(NdisMediaType)}}

			ForListDo $(DriverListNames)
				ifstr $(MSParameterName$(#)) != ""
					set-hextodec DecValue = $($($)Value)
					set ValueToAdd = {$(MSParameterName$(#)),$(NoTitle), +
						$(!REG_VT_DWORD), $(DecValue)}
					set NewValueList = >($(NewValueList), $(ValueToAdd))
				endif
			EndForListDo
	
	
			Debug-Output "AddValueList with KeyParameters = "$(KeyParameters)
			Debug-Output "and NewValueList = "$(NewValueList)
			Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)


			ifint $($ShellCode) != $(!SHELL_CODE_OK)
				Debug-Output "OEMSETUP.INF: AddValueList ShellCode error "$($ShellCode)
				EndWait
				goto ShellCodeError
			endif

			set RegistryErrorIndex = $($R0)

			Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
				Debug-Output "OEMSETUP.INF: AddValueList Registry error "$($ShellCode)
				EndWait
				goto fatalregistry
			endif


			set PromptForSrcRouting = "FALSE"





			Ifstr(i) $(ODIMediaType) == "ETHERNET"
				set ODIParmList = {"Frame ETHERNET_802.2", +
						   "Frame ETHERNET_802.3", +
						   "Frame ETHERNET_II", +
						   "Frame ETHERNET_SNAP" }
			else-Ifstr(i) $(ODIMediaType) == "TOKEN-RING"
				set ODIParmList = {"Frame TOKEN-RING "$(ODITokenRing), +
					"Frame TOKEN-RING_SNAP "$(ODITokenRingSnap) }

				;If there is an ODI stack available remove the comment on the next line
				;set PromptForSrcRouting = "TRUE"

			else-Ifstr(i) $(ODIMediaType) == "FDDI"
				set ODIParmList = {"Frame FDDI_802.2", +
					"Frame FDDI_SNAP" }

				;If there is an ODI stack available remove the comment on the next line
				;set PromptForSrcRouting = "TRUE"

			else
				set ODIParmList = {}
			endif

			Debug-Output "Framenames = "$(ODIParmList)


			;
			; Build List to send to ODI_MODULES\CARDNAME
			;
			ForListDo $(DriverListNames)
				ifstr $($($)Value) == $(Present)
					set ODIParmList = >($(ODIParmList), $($($)Keyword))
				else-ifstr $($($)Value) != $(NotPresent)
					set ODIParmList = >($(ODIParmList), $($($)Keyword)" "$($($)Value))
				endif
			EndForListDo

			ifstr $(ODINodeAddress) != ""
				set ODIParmList = >($(ODIParmList), "Node "$(ODINodeAddress))
			endif

			ifstr $(ODIDefaultSlot) != ""
				set ODIParmList = >($(ODIParmList), "Slot "$(ODIDefaultSlot))
			endif

			ForListDo $(ODIDriverAdditionalParms)
				ifstr $($) != ""
					set ODIParmList = >($(ODIParmList), $($))
				endif
			EndForListDo

			ForListDo $(ODICustomList)
				ifstr $($) != ""
					set ODIParmList = >($(ODIParmList), $($))
				endif
			EndForListDo


			Debug-Output "ODIParmList = "$(ODIParmList)


			Debug-Output "Calling NwSubsInf to NwAddOdiLoadModule."
			Shell $(NwSubsInf) NwAddOdiLoadModule $(CardInstanceName) +
				$(AdapterNumber) $(ODIParmList)
			Debug-Output "Back from Calling NwSubsInf to NwAddOdiLoadModule."

			Ifint $($ShellCode) != $(!SHELL_CODE_OK)
				Debug-Output "OEMSETUP.INF: NwAddOdiLoadModule failure "$($ShellCode)
				Goto ShellCodeError
			Endif

			Set ErrorString = $($R0)
			Ifstr(i) $(ErrorString) != NO_ERROR
				Debug-Output "OEMSETUP.INF: NwAddOdiLoadModule "$(ErrorString)
				EndWait
				goto fatalregistry
			Endif

			Debug-Output "PromptForSrcRouting = "$(PromptForSrcRouting)
			Ifstr(i) $(PromptForSrcRouting) == "TRUE"
				Shell $(NwSubsInf) NwConfigureSourceRouting
			Endif

			Ifstr(i) $(!NTN_InstallMode) == install
				; Open the driver key to add the busNumber, busType, HIN,
				;and slotNumber
				set KeyToFind = +
					$(!NTN_ServiceBase)"\ODILOAD\ODI_MODULES\"$(CardInstanceName)
				OpenRegKey $(!REG_H_LOCAL) ""  $(KeyToFind) $(MAXIMUM_ALLOWED) +
					DriverKey
				set NewValueList = +
					{{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(NTBusNumber)},+
					{BusType,$(NoTitle),$(!REG_VT_DWORD),$(NTBusType)},+
					{HIN,$(NoTitle),$(!REG_VT_DWORD),1},+
					{SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(NTSlotNumber)}}
		Shell  $(UtilityInf), AddValueList, $(DriverKey), $(NewValueList)
				CloseRegKey $(DriverKey)
				Set OdiAdapterInstalledOkay = "1"
			Endif

			ifstr(i) $(CurrentInstallMode) == configure
				goto endwriteparameters
			endif
		endif
	EndForListDo

endwriteparameters = +
	CloseRegKey $(KeyParameters)
	EndWait
	goto successful

isawriteparameters = +
	Shell $(UtilityInf), AddHardwareComponent, $(ODILANDriverName),$(STF_CONTEXTINFNAME),$(ProductKeyName)

	ifint $($R4) != -1
		Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
	endif

	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "OEMNADOA.INF: Cannot add hardware component "$($ShellCode)
		goto ShellCodeError
	endif

	set RegistryErrorIndex = $($R0)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		EndWait
		Debug-Output "OEMNADOA.INF: Registry error: add hardware component "$(RegistryErrorIndex)
		CloseRegKey $($R1)
		CloseRegKey $($R2)
		CloseRegKey $($R3)
		goto fatalregistry
	endif

	set KeyParameters = $($R3)
	set KeyAdapterRules = $($R2)
	set AdapterNumber = $($R4)

	Set-add TempAdapterNumber = $(AdapterNumber),0

	set CardInstanceName = $(ODILANDriverName)" #"$(TempAdapterNumber)

	set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
						{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] ODI "$(ODILANDriverTitle)$(AdapterForNetWare)},+
						{Description,$(NoTitle),$(!REG_VT_SZ),"ODI "$(ODILANDriverTitle)$(AdapterForNetWare)},+
						{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ODILANDriverName)},+
						{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
						{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)},+
						{OdiAdapter,$(NoTitle),$(!REG_VT_DWORD),1}}

	Shell  $(UtilityInf), AddValueList, $($R1), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "OEMNADOA.INF: AddValueList ShellCode error "$($ShellCode)
		goto ShellCodeError
	endif

	CloseRegKey $($R1)

	set TempProdName = """"$(ODILANDriverName)$(AdapterNumber)""""
	set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)

	set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
						{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
						{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}

	Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "OEMNADOA.INF: AddValueList ShellCode error "$($ShellCode)
		goto ShellCodeError
	endif

	set RegistryErrorIndex = $($R0)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		EndWait
		Debug-Output "OEMNADOA.INF: AddValueList Registry error "$(RegistryErrorIndex)
		CloseRegKey $(KeyParameters)
		CloseRegKey $(KeyAdapterRules)
		goto fatalregistry
	endif

	CloseRegKey $(KeyAdapterRules)

	SetRegValue $(KeyParameters) {OdiLoadName,$(NoTitle),$(!REG_VT_SZ),$(CardInstanceName)}
	
	goto isawriteconfigureparameters

isawriteconfigureparameters = +

	Shell $(NwSubsInf), NwGetNICBusInfo, $(CardInstanceName) $(BusInterfaceType) $(BusNumber)

	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "OEMSETUP.INF: NwGetNICBusInfo ShellCode error "$($ShellCode)
		goto ShellCodeError
	endif
	ifint $($R0) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	endif

	set BusNumber = $($R1)  
	set BusTypeName = $($R2)
	set BusInterfaceType = $($R3)
	
	ifstr(i) $(NdisMediaType) == ""
		set NdisMediaType = "1"
		Debug-Output "OEMSETUP.INF: Media type NOT set"
	endif

	set NewValueList = {{MediaType,$(NoTitle),$(!REG_VT_DWORD),$(NdisMediaType)}}

	ForListDo $(DriverListNames)
		ifstr $(MSParameterName$(#)) != ""
			set-hextodec DecValue = $($($)Value)
			set ValueToAdd = {$(MSParameterName$(#)),$(NoTitle),$(!REG_VT_DWORD), $(DecValue)}
			set NewValueList = >($(NewValueList), $(ValueToAdd))
		endif
	EndForListDo
	
	Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)

	CloseRegKey $(KeyParameters)

	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "OEMSETUP.INF: AddValueList ShellCode error "$($ShellCode)
		goto ShellCodeError
	endif

	set RegistryErrorIndex = $($R0)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		Debug-Output "OEMSETUP.INF: AddValueList Registry error "$($ShellCode)
		goto fatalregistry
	endif

	EndWait

	set PromptForSrcRouting = "FALSE"

	Ifstr(i) $(ODIMediaType) == "ETHERNET"
		set ODIParmList = {"Frame ETHERNET_802.2", +
						   "Frame ETHERNET_802.3", +
						   "Frame ETHERNET_II", +
						   "Frame ETHERNET_SNAP" +
						   "BusName "$(BusTypeName) +
						   "BusType "$(BusInterfaceType) +
						   "Bus "$(BusNumber) }
	else-Ifstr(i) $(ODIMediaType) == "TOKEN-RING"
		set ODIParmList = {"Frame TOKEN-RING "$(ODITokenRing), +
						   "Frame TOKEN-RING_SNAP "$(ODITokenRingSnap) +
						   "BusName "$(BusTypeName) +
						   "BusType "$(BusInterfaceType) +
						   "Bus "$(BusNumber) }

		;If there is an ODI stack available remove the comment on the next line.
		;set PromptForSrcRouting = "TRUE"

	else-Ifstr(i) $(ODIMediaType) == "FDDI"
		set ODIParmList = {"Frame FDDI_802.2", +
						   "Frame FDDI_SNAP" +
						   "BusName "$(BusTypeName) +
						   "BusType "$(BusInterfaceType) +
						   "Bus "$(BusNumber) }

		;If there is an ODI stack available remove the comment on the next line.
		;set PromptForSrcRouting = "TRUE"

	else
		set ODIParmList = {}
	endif

	Debug-Output "Framenames = "$(ODIParmList)


	;
	; Build List to send to ODI_MODULES\CARDNAME
	;
	ForListDo $(DriverListNames)
		ifstr $($($)Value) == $(Present)
			set ODIParmList = >($(ODIParmList), $($($)Keyword))
		else-ifstr $($($)Value) != $(NotPresent)
			set ODIParmList = >($(ODIParmList), $($($)Keyword)" "$($($)Value))
		endif
	EndForListDo

	ifstr $(ODINodeAddress) != ""
		set ODIParmList = >($(ODIParmList), "Node "$(ODINodeAddress))
	endif

	ifstr $(ODIDefaultSlot) != ""
		set ODIParmList = >($(ODIParmList), "Slot "$(ODIDefaultSlot))
	endif

	ForListDo $(ODIDriverAdditionalParms)
		ifstr $($) != ""
			set ODIParmList = >($(ODIParmList), $($))
		endif
	EndForListDo

	ForListDo $(ODICustomList)
		ifstr $($) != ""
			set ODIParmList = >($(ODIParmList), $($))
		endif
	EndForListDo


	Debug-Output "ODIParmList = "$(ODIParmList)


	Shell $(NwSubsInf) NwAddOdiLoadModule $(CardInstanceName) $(AdapterNumber) $(ODIParmList)

	Ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "OEMSETUP.INF: NwAddOdiLoadModule failure "$($ShellCode)
		Goto ShellCodeError
	Endif

	Set ErrorString = $($R0)
	Ifstr(i) $(ErrorString) != NO_ERROR
		Debug-Output "OEMSETUP.INF: NwAddOdiLoadModule "$(ErrorString)
		goto fatalregistry
	Endif

	Debug-Output "PromptForSrcRouting = "$(PromptForSrcRouting)
	Ifstr(i) $(PromptForSrcRouting) == "TRUE"
		Shell $(NwSubsInf) NwConfigureSourceRouting
	Endif

	Ifstr(i) $(!NTN_InstallMode) == install
		Set OdiAdapterInstalledOkay = "1"
	Endif
	goto successful

bindingadapter =+
	set Error = $(BindingError)
	goto fatal

removeadapter = +
	Shell $(NwSubsInf) NwRemoveAdapter $(!NTN_RegBase)
	Ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "OEMSETUP.INF: Shell Error NwRemoveAdapter "$($ShellCode)
	Endif

	Shell $(NwSubsInf) NwRemoveNtAdapter $(ProductKeyName) $(Manufacturer)
	Ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "OEMSETUP.INF: NwRemoveNtAdapter "$($ShellCode)
		goto ShellCodeError
	Endif

	set RegistryErrorIndex = $($R0)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		Debug-Output "OEMSETUP.INF: NwRemoveNtAdapter "$(RegistryErrorIndex)
		Ifstr(i) $(RegistryErrorIndex) == "SHELL_CODE_ERROR"
			goto ShellCodeError
		Endif
		goto fatalregistry
	Endif

	goto end

UpgradeSoftware = +
	Ifstr(i) $(DoCopy) == "YES"
		Ifstr(i) $(SrcDir) == ""

			;
			;  Get source location
			;

			Shell $(NwSubsInf), DoAskLANSource, $(!STF_CWDDIR), $(SrcDir) YES

			Ifint $($ShellCode) != $(!SHELL_CODE_OK)
				Goto ShellCodeError
			Else-Ifstr(i) $($R0) == STATUS_FAILED
				Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
				ifint $($ShellCode) != $(!SHELL_CODE_OK)
					goto ShellCodeError
				endif
				set Error = $($R0)
				Goto fatal
			Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
				Goto end
			Endif

			Set SrcDir = $($R1)
		Endif
	Endif

	install "Install-Option"

	Ifstr(i) $(DoConfig) == "YES"
		goto configureadapter
	else
		goto end
	endif

successful = +
	goto end

abandon = +
	ForListDo $(OEM_ABANDON_OPTIONS)
	Shell $(NwSubsInf) NwRemoveNtAdapter $(ProductKeyName) $(Manufacturer) $($)
	Ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "OEMSETUP.INF: NwRemoveNtAdapter "$($ShellCode)
		goto ShellCodeError
	Endif

		set RegistryErrorIndex = $($R0)

		Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
			goto fatalregistry
		endif
	EndForListDo

	goto end

warning = +
	Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	endif
	ifstr(i) $($R1) == "OK"
		goto $(to)
	else-ifstr(i) $($R1) == "CANCEL"
		goto $(from)
	else
		goto "end"
	endif


nonfatalinfo = +
	Set CommonStatus = STATUS_USERCANCEL
	Set Severity = STATUS
	goto nonfatalmsg
nonfatal = +
	Set Severity = NONFATAL
	goto nonfatalmsg
nonfatalmsg = +
	ifstr(i) $(Error) == ""
		Set Severity = NONFATAL
		Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		endif
		set Error = $($R0)
	endif
	Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	endif
	ifstr(i) $($R1) == "OK"
		goto $(from)
	else
		goto "end"
	endif

fatalregistry = +
	Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	endif
	set Error = $($R0)
	goto fatal

fataldetect = +
	Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Debug-Output "OEMSETUP.INF: ShellCode error: cannot get an error string."
		goto ShellCodeError
	endif
	set Error = $($R0)
	Goto fatal
fatal = +
	ifstr(i) $(Error) == ""
		Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		endif
		set Error = $($R0)
	endif
	Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	endif

	goto setfailed

ShellCodeError = +
	set DlgType       = "MessageBox"
	set STF_MB_TITLE = "Error: "$(Function$(Option)Title)
	set STF_MB_TEXT  = "Shell Code Error"
	set STF_MB_TYPE  = 1
	set STF_MB_ICON  = 3
	set STF_MB_DEF  = 1
	ui start "Error Message"
	goto setfailed

setfailed = +
	set CommonStatus = STATUS_FAILED
	ifstr(i) $(OEM_ABANDON_ON) == TRUE
		set OEM_ABANDON_ON = FALSE
		goto abandon
	endif
	goto end

end = +
	goto term

term = +
;       Ifstr(i) $(OdiAdapterInstalledOkay) == "1"
;               Debug-Output "Calling NwSubsInf to GetOdiAdapterList."
;               Shell $(NwSubsInf) GetOdiAdapterList
;               ifint $($R3) < 2
;                       Set DlgType = "MessageBox"
;                       Set STF_MB_TITLE = "NetWare ODI LAN Drivers Setup"
;                       Set STF_MB_TEXT  = "The NetWare ODI Adapter was successfully installed.  "+
;                                                       "Your NetWare installation is COMPLETE."
;                       Set STF_MB_TYPE  = 1
;                       Set STF_MB_ICON  = 2
;                       Set STF_MB_DEF  = 1
;                       ui start "Error Message"
;               Endif
;       Endif

	;
	; Check if ODINSUP needs to be installed
	;

	Shell $(NwSubsInf), CheckIfODINSUPIsNeeded

	Return $(CommonStatus)

[Install-Option]
	set STF_VITAL = ""

	ifstr(i) $(AddCopy) == "YES"
		AddSectionKeyFileToCopyList $(Option) DriverName $(OldSrcDir) $(!STF_WINDOWSSYSPATH)\netware
	endif

	ifstr(i) $(DoCopy) == "YES"
		set !STF_NCPA_FLUSH_COPYLIST = TRUE
		CopyFilesInCopyList
	endif

	ifstr(i) $(DoConfig) == "YES"
	endif

	Exit

;[Install-Update]
;       set STF_VITAL           = ""
;       set STF_OVERWRITE       = "VERIFYSOURCEOLDER"
;
;       AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\netware
;       AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
;
;       set !STF_NCPA_FLUSH_COPYLIST = TRUE
;       CopyFilesInCopyList
;
;       exit

[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386


[ChoicesNamesList]
"Int",          "Interrupt Number",     "InterruptNumber"
"Port",         "Port",                                 "IOBaseAddress"
"Mem",          "Memory Address",               "MemoryMappedBaseAddress"
"Dma",          "DMA Channel",                  "DMAChannel"

[ODIListNamesSection]
	List1
	List2
	List3
	List4
	List5
	List6


[DefaultParameterLists]
	NWIRQList1
	NWIRQList2
	NWIRQList3
	NWIRQList4
	NWIRQList5
	NWIRQList6
	NWPORTList1
	NWPORTList2
	NWPORTList3
	NWPORTList4
	NWPORTList5
	NWPORTList6
	NWPORTList7
	NWPORTList8
	NWPORTList9
	NWDMAList1
	NWMEMList1


[NWIRQList1]
Num1 =  2
Num2 =  3
Num3 =  4
Num4 =  5
Num5 =  6
Num6 =  7
Num7 =  9
Num8 =  A
Num9 =  B
Num10 = F

[NWIRQList2]
Num1 =  3
Num2 =  4
Num3 =  5
Num4 =  9

[NWIRQList3]
Num1  = 3
Num2  = 4
Num3  = 5
Num4  = 6
Num5  = 7
Num6  = 9
Num7  = A
Num8  = B
Num9  = C
Num10 = F

[NWIRQList4]
Num1 =  3
Num2 =  4
Num3 =  5
Num4 =  7
Num5 =  9
Num6 =  A
Num7 =  B
Num8 =  F

[NWIRQList5]
Num1 =  3
Num2 =  4
Num3 =  5
Num4 =  6
Num5 =  7
Num6 =  9
Num7 =  A
Num8 =  B
Num9 =  C

[NWIRQList6]
Num1 =  2
Num2 =  3
Num3 =  4
Num4 =  5
Num5 =  A
Num6 =  B
Num7 =   C
Num8 =  F

[NWPORTList1]
Num1  = 200
Num2  = 208
Num3  = 210
Num4  = 218
Num5  = 220
Num6  = 228
Num7  = 230
Num8  = 238
Num9  = 240
Num10 = 248
Num11 = 250
Num12 = 258
Num13 = 260
Num14 = 268
Num15 = 270
Num16 = 278
Num17 = 280
Num18 = 288
Num19 = 290
Num20 = 298
Num21 = 2A0
Num22 = 2A8
Num23 = 2B0
Num24 = 2B8
Num25 = 2C0
Num26 = 2C8
Num27 = 2D0
Num28 = 2D8
Num29 = 2E0
Num30 = 2E8
Num31 = 2F0
Num32 = 2F8
Num33 = 300
Num34 = 308
Num35 = 310
Num36 = 318
Num37 = 320
Num38 = 328
Num39 = 330
Num40 = 338
Num41 = 340
Num42 = 348
Num43 = 350
Num44 = 358
Num45 = 360
Num46 = 368
Num47 = 370
Num48 = 378
Num49 = 380
Num50 = 388
Num51 = 390
Num52 = 398
Num53 = 3A0
Num54 = 3A8
Num55 = 3B0
Num56 = 3B8
Num57 = 3C0
Num58 = 3C8
Num59 = 3D0
Num60 = 3D8
Num61 = 3E0
Num62 = 3E8
Num63 = 3F0
Num64 = 3F8

[NWPORTList2]
Num1  = 200
Num2  = 220
Num3  = 240
Num4  = 260
Num5  = 280
Num6  = 300
Num7  = 320
Num8  = 340
Num9  = 360
Num10 = 380

[NWPORTList3]
Num1  = A20
Num2  = A24

[NWPORTList4]
Num1  = 100
Num2  = 120
Num3  = 140
Num4  = 160
Num5  = 180
Num6  = 1A0
Num7  = 1C0
Num8  = 1E0
Num9  = 200
Num10 = 220
Num11 = 240
Num12 = 260
Num13 = 280
Num14 = 2A0
Num15 = 2C0
Num16 = 2E0
Num17 = 300
Num18 = 320
Num19 = 340
Num20 = 360
Num21 = 380
Num22 = 3A0
Num23 = 3C0
Num24 = 3E0

[NWPORTList5]
Num1  = 1A20
Num2  = 2A20
Num3  = 3A20
Num4  = 3A40
Num5  = 3A60
Num6  = 3A80
Num7  = 3AA0
Num8  = 4AE0

[NWPORTList6]
Num1  = 0A20
Num2  = 1A20
Num3  = 2A20
Num4  = 3A20
Num5  = 3A60
Num6  = 1000
Num7  = 2000
Num8  = 3000
Num9  = 4000
Num10 = 5000
Num11 = 6000
Num12 = 7000
Num13 = 8000

[NWPORTList7]
Num1  = 240
Num2  = 280
Num3  = 2C0
Num4  = 300
Num5  = 320
Num6  = 340
Num7  = 360

[NWPORTList8]
Num1  = 200
Num2  = 220
Num3  = 240
Num4  = 260
Num5  = 280
Num6  = 2A0
Num7  = 2C0
Num8  = 2E0
Num9  = 300
Num10  = 320
Num11  = 340
Num12  = 360
Num13  = 380
Num14  = 3A0
Num15  = 3C0
Num16  = 3E0

[NWPORTList9]
Num1  = 200
Num2  = 210
Num3  = 220
Num4  = 230
Num5  = 240
Num6  = 250
Num7  = 260
Num8  = 270
Num9  = 280
Num10 = 290
Num11 = 2A0
Num12 = 2B0
Num13 = 2C0
Num14 = 2D0
Num15 = 2E0
Num16 = 2F0
Num17 = 300
Num18 = 310
Num19 = 320
Num20 = 330
Num21 = 340
Num22 = 350
Num23 = 360
Num24 = 370
Num25 = 380
Num26 = 390
Num27 = 3A0
Num28 = 3B0
Num29 = 3C0
Num30 = 3D0
Num31 = 3E0
Num32 = 3F0


[NWMEMList1]
Num1 = C0000
Num2 = C4000
Num3 = C8000
Num4 = CC000
Num5 = D0000
Num6 = D4000
Num7 = D8000
Num8 = DC000

[NWDMAList1]
Num1 = 1
Num2 = 2
Num3 = 3
Num4 = 4
Num5 = 5
Num6 = 6
Num7 = 7


;
;       See the documentation on "Building your own OEMSETUP.INF" for more information.

;
;  List order for Option Names
;       ALL INDEXES ARE ONE-BASED (i.e. the first item in the list is number "1")
;


; **************************************************************************
; *  ODI LAN DRIVER SECTION                                                *
; **************************************************************************

[Options]
	ODI_PCNETPCI
	ODI_PCNET32
	ODI_PCNETPNP
	ODI_PCNETISA


[ODI_PCNETPCI]
Title = "AMD PCNet-PCI,PCNet-FAST"
DriverName = 1, PCNTNW.LAN
MediaType = "ETHERNET"
CardType = "PCI"
CardId = 8192           ; 2000h
Vendor = 4130           ; 1022h
CanShareSlot = "NO"
Custom = {"AMDDEV","BOARD","FDUP","LED0","LED1","LED2"}
List1 = "AMDDEV", "AMD PCI Device type", "PCI", {"PCI","PCI1","PCI2"}
List2 = "BOARD", "Physical Board Number", "1", {"1","2","3","4"}
List3 = "FDUP", "Full Duplex Support", "DON'TCARE", {"DON'TCARE","OFF","UTP","AUI"}
List4 = "LED0","LED0 Value","DON'TCARE",{"DON'TCARE","00C0","00B0","4088","0081",}
List5 = "LED1","LED1 Value","DON'TCARE",{"DON'TCARE","00C0","00B0","4088","0081",}
List6 = "LED2","LED2 Value","DON'TCARE",{"DON'TCARE","00C0","00B0","4088","0081",}

[ODI_PCNET32]
Title = "AMD PCNet-32"
DriverName = 1, PCNTNW.LAN
MediaType = "ETHERNET"
Custom = {"AMDDEV","BOARD","LED0","LED1","LED2","LED3"}
List1 = "AMDDEV", "AMD Device Type", "VESA", {"VESA"}
List2 = "BOARD", "Physical Board Number", "1", {"1","2","3","4"}
List3 = "LED0","LED0 Value","DON'TCARE",{"DON'TCARE","00C0","00B0","4088","0081",}
List4 = "LED1","LED1 Value","DON'TCARE",{"DON'TCARE","00C0","00B0","4088","0081",}
List5 = "LED2","LED2 Value","DON'TCARE",{"DON'TCARE","00C0","00B0","4088","0081",}
List6 = "LED3","LED3 Value","DON'TCARE",{"DON'TCARE","00C0","00B0","4088","0081",}

[ODI_PCNETPNP]
Title = "AMD PCNetISA+,PCNetISA-II"
DriverName = 1, PCNTNW.LAN
MediaType = "ETHERNET"
Custom = {"AMDDEV","BOARD","FDUP","BUSTIMER","LED1","LED2"}
List1 = "AMDDEV", "AMD Device Type", "PNP", {"PNP"}
List2 = "BOARD", "Physical Board Number", "1", {"1","2","3","4"}
List3 = "FDUP", "Full Duplex Support", "DON'TCARE", {"DON'TCARE","OFF","UTP","AUI"}
List4 = "BUSTIMER","Bustimer Value","0",{"0","5","6","7","8","9","10","11","12","13"}
List5 = "LED1","LED1 Value","DON'TCARE",{"DON'TCARE","00C0","00B0","4088","0081",}
List6 = "LED2","LED2 Value","DON'TCARE",{"DON'TCARE","00C0","00B0","4088","0081",}

[ODI_PCNETISA]
Title = "AMD PCNetISA"
DriverName = 1, PCNTNW.LAN
MediaType = "ETHERNET"
Custom = {"BUSTIMER","LED1","LED2"}
List1 = "PORT", NWPORTList2, "300", 6, 9
List2 = "INT", NWIRQList2, "3", ALL
List3 = "DMA", "DMA Channel", "5", {3,5,6,7}
List4 = "BUSTIMER","Bustimer Value","0",{"0","5","6","7","8","9","10","11","12","13"}
List5 = "LED1","LED1 Value","DON'TCARE",{"DON'TCARE","00C0","00B0","4088","0081",}
List6 = "LED2","LED2 Value","DON'TCARE",{"DON'TCARE","00C0","00B0","4088","0081",}


[Strings]
	;
	; Every string that is in quotes from this point to the end of the
	; file will be pulled out and put into the translation teams database.
	; There parser looks for the section [Strings] and then goes to the
	; end of the file.  DO NOT put strings below this point in the file
	; that should not be translated.  Likewise, all strings that need to
	; be translated should be in quotes and below this point in the file.
	;

[Source Media Descriptions]
	1  = "PCnet Netware ODI Driver Disk" , TAGFILE = DISK1

[ODIStringsENG]
AdapterForNetWare = " Adapter for NetWare"
NetWareForWindowsNT = "NetWare for Windows NT"
Present = "Present"
NotPresent = "Not Present"
NetWareODILANDriversDisk = "NetWare ODI LAN Drivers Disk"
BindingError = "Binding: Sorry, not yet implemented."

[DialogConstantsENG]
Help            = "&Help"
;Exit           = "&Cancel"
OK                = "OK"
HelpContext = ""
Continue        = "&Continue"
Cancel    = "&Cancel"
Advanced = "&Advanced"
IDH_NETWAREWRKSTATIONPARMS =  901
IDH_NETWAREIPXBIND         =  902
IDH_IPXSPXPARMS            =  903
IDH_NETWORKPROTOCOL        =  904
IDH_NETWAREODISETTINGS     =  905
IDH_NETWARECLIENTINSTALL   =  906
IDH_NETWARENDISODI         =  907
IDH_NODEADDRESSOVERIDE     =  908
IDH_RESMGRCONFIG                                =  951

[LANDriverDlgENG]
DlgType = "RadioCombination"
DlgTemplate = "List"$(ODINumberofDriverLists)
Caption = "ODI "$(ODILANDriverTitle)" Adapter Configuration"
EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
HelpContext = $(IDH_NETWAREODISETTINGS)


[NoParmsENG]
DlgType = "RadioCombination"
DlgTemplate = "NO_PARAMETERS"
Caption = "ODI "$(ODILANDriverTitle)" Adapter Configuration"
EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
HelpContext = ""
CBOptionsGreyed = {}
ComboListItemsIn = {}
ComboListItemsOut = {}
NotifyFields = {}


[AdvancedDialogENG]
DlgType = "RadioCombination"
Caption = "Advanced Settings"
EditTextIn = $(ODINodeAddress)
EditTextLim = 13
CBOptionsGreyed = {}
HelpContext = $(IDH_NODEADDRESSOVERIDE)
NotifyFields = {}


[FileConstantsENG]
ProCaption      = "NetWare ODI LAN Drivers Setup"
ProCancel       = "Cancel"
ProCancelMsg = "NetWare for Windows NT is not correctly installed.  "+
				"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1         = "Copying:"
ProText2         = "To:"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.22