Information about BootROM for PCnet family adapters
---------------------------------------------------
This directory has the following contents:
readme.txt - This readme file
\netrom.hex - This is the general purpose bootrom. This file is in Intel
MSC-86 hex format. This bootrom allows remote boot from a Novell
Netware server supporting RPL, Microsoft LAN Manager server, and IBM
LAN Server . This file can be burned into a PROM and the PROM can be
used to remote boot from one of the three servers listed above.
The bootrom code will give the user an option to select from the
several servers during the boot process or to boot from the first
server found on the network. If no selection made, in 10 seconds boot
process is started (for the systems without monitor
and/or keyboard).
Bootrom supports all PCnet Family devices for all possible IOBase, IRQ
and DMA combinations (for ISA, only 4 combinations are supported, as
for the previous versions).
Bootrom code is based on Novell LanKit 3.02 RPL code. In addition to
multi-server support, the code is modified to include PCI optional RPL
header. Plug'n Play cards are supported as a legacy RPL devices.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.