HighPoint Xstore Pro WINDOWS 95/98 Revision 1.00 (Aug 31, 1998) ############################################################################# NOTE: This Windows 95/98 driver dose not support CD-ROM Changers. If you have a ATAPI CD-ROM Changer installed in your system, please do not install this driver!. This driver supports several PCI Bus Master Controllers such as Intel, Sis, Ali, Via and others. 1 INSTALLATION 1. Insert the cd-titlek into cd-rom drive. 2. Open "My Computer", double click "cd-rom Drive:". 3. Specify the path of d:\p6bx-a+\IDE\Win9x (Assume D is cd-rom drive) 4. Double click the Setup program. 5. Then just follow the instructions to install the driver. IMPORTANT NOTE: We have found that the Windows 95 OSR2/Windows 98 version would fail to load the driver on some systems using Bus Master chipset after you install and restart the system. The following step could solve this problem if it happens: 1. Go to <MyComputer and double click Control Panel> 2. Double click System then go to Device Manger and View Devices by Type 3. Go to hard disk controllers 4. Double click PCI Bus Master IDE Controller (Ultra DMA supported) (there should be a yellow mark besides this instance) 5. Click Resources and you should see a box near the bottom of the screen that says Set Configuration manaully. 6. Click on the Set Configuration manually and you will see a check next to Use automatic setting 7. Uncheck the box and when the system asks you to reboot click yes 8. After the system restarts the yellow mark should be gone 2 DE-INSTALLATION 1. Insert the cd-titlek into cd-rom drive. 2. Open "My Computer", double click "cd-rom Drive:". 3. Specify the path of d:\p6bx-a+\IDE\Win9x (Assume D is cd-rom drive) 4. Double click the Setup program. 5. Then just follow the instruction to de-install the driver. 3. To get a better disk performance, the minimum memory requirement is 48 MB 4. This driver might lock on certain motherboards. Please check with motherboard vendors first if you encounter problems.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.