Version EX-81524-610 Interact Application Manager Menu String Text File Current Index count = 0 -> 675 Msg# AccKey=ASCII Message --------------------------- 0 -1=CHANGE 1 00=USER 2 0=SELECT 3 -1=APPL. 4 0=INTERACT 5 -1=SETTINGS 6 00=APPL. 7 -1=SETTINGS 8 1=EXIT 9 -1=INTERACT 10 -1=GO TO 11 0=MODULE 12 -1=GO TO 13 0=DRIVER 14 0=RUN/PROG 15 -1=MODE 16 0=RUN/PROG 17 -1=MODE 18 00=MODULE 19 -1=DESIGN 20 03=PRINT 21 -1=SETTINGS 22 0=MODULES 23 -1=USED 24 0=PASSWORD 25 -1=SETTINGS 26 0=STARTUP 27 -1=SETTINGS 28 03=PRINT 29 -1=SETTINGS 30 0=ADD 31 -1=MODULE 32 0=REMOVE 33 -1=MODULE 34 0=ADD 35 -1=DRIVER 36 0=REMOVE 37 -1=DRIVER 38 02=RENAME 39 -1=MODULE 40 02=RENAME 41 -1=DRIVER 42 -1=Cannot switch to 43 -1=Cannot remove Application subdirectory. 44 -1=Current Application Settings for: 45 -1=Error encountered in initializing write data. 46 -1=DATE FORMAT 47 -1=TIME FORMAT 48 -1=`GO TO AM' KEY 49 -1=STARTUP APPLICATION 50 -1=Interact Settings: 51 -1=AM MENU COLOR 52 0=PREVIOUS 53 -1=PAGE 54 0=NEXT 55 -1=PAGE 56 0=CANCEL 57 -1=EDIT 58 0=PASSWORD 59 00=MAKE NEW 60 -1=APPL. 61 0=BLINK 62 -1=OPTION 63 0=FONTS 64 -1=OPTION 65 03=PREVIOUS 66 -1=MENU 67 0=ACCEPT 68 0=CANCEL 69 0=YES 70 0=NO Blank line: 71 -1= 72 -1=Modules Used: 73 -1=Drivers Used: 74 -1=NONE 75 -1=NONE 76 -1=No Interact Applications currently exist. 77 -1=Select an Application: 78 -1=Select a Module: 79 -1=Select a Driver: 80 -1=Cannot go to Module. 81 -1=Cannot go to Driver. 82 -1=No Interact Application is selected. 83 -1=Not enough memory. 84 -1=Interact configuration error. 85 -1=Cannot find Application space. 86 -1=Verify that Interact is properly installed. 87 -1=Verify correct setting of the "INTERACT" environment variable. 88 -1=Cannot find the selected Application. 89 -1=Cannot load Interact Module into memory: 90 -1=Cannot load font file: 91 -1=Startup Mode 92 -1=Application: 93 -1=Current Mode 94 -1=PROGRAM 95 -1=TEST 96 -1=RUN 97 -1=NONE 98 -1=Select Module to Add: 99 -1=Select Driver to Add: 100 -1=Select Module to Remove: 101 -1=Select Driver to Remove: 102 -1=* ERROR * 103 -1=No Modules specified. 104 -1=No Drivers specified. 105 -1=No Modules exist. 106 -1=No Drivers exist. 107 -1=Abandon changes to current Application? 108 -1=Remove current Module from memory? 109 -1=Remove current Driver from memory? 110 -1=Exit from Interact? 111 -1=Cannot load 112 -1=aborted 113 -1=Save as 114 -1=Enter Application Name: 115 -1=Remove 116 -1=from Disk? 117 -1=Cannot create Application 118 -1=Do you wish to save Application changes? 119 -1=Select Module to Rename: 120 -1=Select Driver to Rename: 121 -1=Enter new name for 122 -1= 123 -1=One Moment... 124 -1=already exists. 125 -1=Select User for Startup: 126 -1=No. USER NAME USER PASSWORD LEVEL 127 -1=Password Settings: 128 -1=Startup Settings: 129 -1=BLINK ACTIVE 130 -1=Enter Password for Level 131 -1=User: 132 -1=Password? 133 -1=FONTS IN HIGH MEMORY 134 -1=Incompatible Application version. 135 -1=STARTUP SETTINGS 136 -1=Saved 137 -1=LEVEL 138 -1=SHIFT- 139 -1=Select Color: 140 -1=COLOR FOR BLINK 141 -1=BLINK ON COLOR 142 -1=BLINK OFF COLOR 143 -1=STARTUP MODE 144 -1=STARTUP MODULE 145 -1=STARTUP USER 146 -1=Black 147 -1=Blue 148 -1=Green 149 -1=Cyan 150 -1=Red 151 -1=Magenta 152 -1=Brown 153 -1=White 154 -1=Grey 155 -1=LtBlue 156 -1=LtGreen 157 -1=LtCyan 158 -1=LtRed 159 -1=LtMag 160 -1=Yellow 161 -1=LtWhite 162 -1=AM 163 -1=* NOTE * 164 -1=The FONT option is implemented at startup. 165 -1=To use the new setting, please EXIT INTERACT 166 -1=and run the Application Manager again. 167 -1=`NEXT MODULE' KEY 168 -1=`PREVIOUS MODULE' KEY 169 -1=Home 170 -1=PgUp 171 -1=End 172 -1=PgDn 173 -1=Ins 174 -1=Del 175 -1=Left 176 -1=Right 177 -1=Tab 178 -1=BackTab 179 -1=Can't read Text or Help File. 180 -1=High Memory is not available for fonts. 181 -1=Fonts were loaded into System Memory. 182 -1=You may wish to edit Interact Settings 183 -1=for this option. 184 -1=Enter 185 -1=Keypad 186 -1=`SELECTION' KEY 187 -1=R-SHIFT 188 -1=L-SHIFT 189 -1=CTRL 190 -1=ALT 191 -1=Select Key to Use: 192 -1=Select Application Manager Interrupt: 193 -1=HEX 194 -1=AM INTERRUPT 195 -1=Cannot save Settings. 196 -1=APPLICATION SETTINGS 197 -1=INTERACT SETTINGS 198 -1=MODULES USED 199 -1=PASSWORD SETTINGS 200 -1=* WARNING * 201 -1=Esc 202 -1=APPLICATION MANAGER HELP 203 -1=Cannot initialize 204 -1=Initialization error - Incompatible help file version: 205 00=GO TO 206 00=IGNORE 207 -1=Maximum number has been reached. 208 0=CONTINUE 209 0=HELP ON 210 -1=INTERACT 211 0=DRIVERS 212 -1=USED 213 -1=DRIVERS USED 214 -1=NOT 215 -1=SIN 216 -1=COS 217 -1=TAN 218 -1=LOG 219 -1=NLOG 220 -1=EXP 221 -1=ASIN 222 -1=ACOS 223 -1=ATAN 224 -1=SQRT 225 -1=ABS 226 -1= 227 -1=Backspace 228 6=Press 2 to ABORT 229 6=Press 1 to RETRY 230 -1=Printer port does not exist. 231 -1=Printer not ready. 232 -1=Printer out of paper. 233 -1=Printer time out. 234 -1=Printer I/O error. 235 -1=CRITICAL ERROR DETECTED 236 -1=Disk write-protected. 237 -1=Unknown drive specification. 238 -1=Drive not ready. 239 -1=Unknown command. 240 -1=Drive data CRC error. 241 -1=Bad drive-request structure. 242 -1=Drive seek error. 243 -1=Unknown media type. 244 -1=Disk sector not found. 245 -1=Printer out of paper. 246 -1=I/O write fault. 247 -1=I/O read fault. 248 -1=General failure. 249 -1=Disk drive fault. 250 -1=Hardware I/O failure. 251 00=PRINTER 252 -1=SETUP 253 -1=PRINTER SETUP 254 -1=PORTRAIT 255 -1=LANDSCAPE 256 -1=PRINTER PORT 257 -1=PRINT ORIENTATION 258 -1=IMAGE WIDTH 259 -1=IMAGE HEIGHT 260 -1=BLACK/WHITE REVERSAL 261 -1=Setup for 262 -1=Select Port for Printer: 263 -1=`PRINT SCREEN' KEY 264 -1=Invalid `amprint.cfg' file. 265 -1=KEY ASSIGNMENTS 266 -1=INTERACT VERSIONS 267 00=ASSIGN 268 -1=KEYS 269 00=INTERACT 270 -1=VERSIONS 271 00=AM 272 -1=VERSION 273 00=MODULE 274 -1=VERSIONS 275 00=DRIVER 276 -1=VERSIONS 277 00=PRINT 278 -1=VERSIONS 279 -1=Key Assignments: 280 -1=Module Versions: 281 -1=Driver Versions: 282 -1=Application Manager Version: 283 -1=Changes made in %s have not been completed 284 -1=or saved. Continuing with the selected 285 -1=operation can result in lost work and time. 286 -1=IGNORE returns you to the AM main menu so 287 -1=%-9syou may retry this operation, and the 288 -1= changes will be lost. 289 -1=12 HOUR 290 -1=24 HOUR 291 -1=MM/DD/YY 292 -1=DD/MM/YY 293 -1=Version incompatible with this Application Manager. 294 -1=REPORT 296 00=DRIVER 297 -1=SETUP 298 -1=STARTUP WRITE VALUES 299 -1=PRESETS 300 -1=LAST STATE 301 -1=Please make sure your printer is attached and 302 -1=on-line. Press ACCEPT to print, CANCEL to abort. 303 -1=requires a Module which has not been 304 -1=specified for this Application. 305 -1= ATTENTION INTERACT USER !!!! 306 -1= 307 -1=Becoming a member of CTC's Product Support 308 -1=Program will keep you updated with the latest 309 -1=Interact releases. Members can also obtain: 310 -1= 311 -1= * 24-hour Emergency Phone Support 312 -1= * Training Discounts * Communications Drivers 313 -1= * Program Newsletter * Printer Drivers 314 -1= 315 -1=Complete the registration card included with the 316 -1=manual and return it to CTC. Or, enroll by calling 317 -1=CTC at (513) 248-1714. Ask for Customer Service. 318 -1=The Interact security device is not programmed 319 -1=to support this Module/Driver. Refer to the User 320 -1=Manual to perform program installation. 321 -1=The Interact security device is missing or invalid. 322 -1=Please make sure the device has been properly installed. 323 -1=Press any key to continue... 324 -1=POINTER MODE 325 -1=RELATIVE 326 -1=ABSOLUTE 327 -1=GO TO allows you to complete and save the 328 -1=%-9schanges. 329 00=2 ABORT 330 00=1 RETRY 331 -1=USER 332 -1=Level: 333 -1=Select User Level: 334 -1=Error while reading Data Transfer File INTERACT.DTM. 335 -1=Transfer Group Address 336 -1=Transfer Address 337 -1=Cannot initialize Data Transfers. 338 -1= 339 -1=Module Total: 340 -1=Driver Total: 341 -1=Pg. 342 1=NEXT 343 -1=PAGE 344 -1= BS 345 -1= Enter 346 -1=ERROR - Interact has encountered a fatal error and cannot continue. 347 -1= Please reboot and run the Application Manager again. 348 -1=The selected module has no run-time display. 349 00=DISPLAY 350 -1=TYPE 351 -1=Select Display Type: 352 -1=COLOR 353 -1=PLASMA 354 -1=EL. LUM. 355 -1=GREY 356 -1=RUN MODE CURSOR TYPE 357 -1=DISPLAY TYPE @ 359 -1=APPL. 360 0=UTILITY 361 00=COPY 362 -1=APPL. 363 00=DELETE 364 -1=APPL. 365 00=RENAME 366 -1=APPL. 367 -1=APPLICATION UTILITY 368 -1=Select Application to Copy: 369 -1=Select Application to Delete: 370 -1=Select Application to Rename: 371 -1=* CONFIRM * 372 -1=Delete all files for Application 373 -1=Cannot remove directory 374 -1=deleted. 375 -1=Enter New Name: 376 -1=Cannot rename Application 377 -1=renamed to 378 -1=Cannot copy Application 379 -1=copied to 380 -1=The same Application name was specified 381 -1=for both source and destination. 382 -1=Make sure there is disk space to copy the files. 383 -1=Cannot copy to the currently loaded Application. 384 -1=Option not selectable for Monochrome display. 385 -1=Monochrome 386 -1=ARROW 387 -1=BOX 388 -1=NONE 389 -1=Select Run Mode Cursor Type: 390 -1=LINK\RELAY 391 -1=LINK\BATTERY_LOW 392 -1=already exists. Overwrite its files? 393 -1=Insufficient memory for TAG file. 394 -1=Option not selectable for PowerStation. 395 -1=DISPLAY DATA ERRORS 396 -1=One Moment... (F10 to Abort) 397 01=PREVIOUS 398 -1=`PRINT SCREEN' OUTPUT 399 -1=Output Reference: 400 -1=Cannot initialize RUN mode. 401 -1=Cannot register `Print Screen' Output. 402 -1=Cannot register PowerStation LINK reference. 403 -1=LINK\USER_LEVEL 404 -1=Cannot initialize Screen Saver option. 405 -1=Screen Saver feature not supported by VGA card. 406 01=PREVIOUS 407 -1=PAGE 408 02=NEXT 409 -1=PAGE 410 -1=SCREEN SAVER OPTION 411 -1=SCREEN SAVER TIMEOUT 412 -1=MIN. 413 -1=MOMENTARY FUNCTION KEY 414 -1= DANGER 415 -1=Selection of the BOX cursor for use with a 416 -1=touchscreen may cause unintended system 417 -1=operation. Refer to the user documentation 418 -1=for additional information. 419 -1=`SELECT MODULE' OUTPUT 420 -1=`CURRENT MODULE' INPUT 421 -1=Cannot register `Select Module' Output. 422 -1=Cannot register `Current Module' Input. 423 -1=SCREEN SAVER OVERRIDE 424 -1=Cannot register Screen Saver Override Reference. @ 425 -1=%s has a task in progress that you may 426 -1=not wish to abort. 427 -1= 428 -1=IGNORE returns you to the AM main menu so 429 -1=%-9syou may retry this operation, and the 430 -1= task in progress will be aborted. 431 -1=GO TO allows you to obtain additional 432 -1=%-9sinformation. 433 -1=`TAG EDITOR' KEY 434 -1=MEMORY 435 01=AVAIL. 436 -1=Memory Error 437 -1=I= 438 -1=O= 439 -1=INTERACT APPLICATION MANAGER 440 00=TAG 441 01=EDITOR 442 02=POWER 443 -1=STATION 444 -1=PowerStation Settings: @ 446 -1=DISABLED 447 -1=ENABLED 448 -1=POWERSTATION SETTINGS 449 -1=`TEMP. STATUS' OUTPUT 450 -1=WATCHDOG TIMER 451 -1=WATCHDOG TIMEOUT VALUE 452 -1=SECONDS 453 -1=Cannot register Temperature Sensor Reference. @ 455 -1=COMMUNICATION PORT SETTINGS 456 -1=PORT ADDRESS INTERRUPT 457 -1=COM 458 -1=Communication Ports: 459 00=COMM. 460 -1=PORTS 461 -1=BOX CURSOR COLOR @ 462 -1=Cannot Read Internal Keyboard File 463 -1=Incompatible Internal Keyboard File @ 464 -1=KEYBOARD SETTINGS 465 00=KEYBOARD 466 -1=SETUP 467 -1=KEYBOARD TYPE 468 -1=INITIAL LOCATION 469 -1=KEYBOARD COLOR 470 -1=EXTERNAL 471 -1=INTERNAL 472 -1=BOTTOM 473 -1=TOP 474 -1=SHIFTKEY MODE 475 -1=SHIFT LOCK/RELEASE 476 -1=SHIFT LOCK @ @ Arrow Up Key 477 -1= 478 -1=EXIT @ Arrow Down 479 -1= @ 480 -1=SCREEN SAVER TYPE 481 -1=DISPLAY TEXT 482 -1=DISPLAY TEXT FONT 483 -1=DISPLAY TEXT COLOR 484 -1=BLANK 485 -1=TEXT STRING 486 -1=SELECT FONT @ 487 00=TIME & 488 -1=DATE 489 -1=TIME & DATE MENU @490 @ 491 -1=BUFFERED PRINT 492 -1=`ABORT PRINT' KEY 493 -1=INHIBIT AM MENU @ 494 -1=Go To Module Key: 495 -1=Go To Driver Key: 496 -1=Keyboard Settings: 497 -1=The Interact security key is missing, which is a 498 -1=violation of the Interact Software License 499 -1=Agreement. Module and Driver screens will now 500 -1=flash until the security key is restored. @ 501 -1=PORT INTERFACE 502 -1=DIRECT 503 -1=DOS @ 504 -1=RUN Mode for P2 Interact on a development system 505 -1=is provided only for verifying panel tool 506 -1=references. 507 -1= 508 -1=Data from the controller will not be displayed 509 -1=on output tools, and data from input tools will 510 -1=not be written to the controller. @ 511 -1=KEYBOARD FILENAME 512 -1=Cannot find METWND05.DRP. 513 -1=Interact security key missing. @ 514 -1=SET 515 00=TIME 516 -1=SET 517 00=DATE 518 00=READ 519 -1=TIME 520 01=READ 521 -1=DATE 522 00=SEND 523 -1=TIME 524 02=SEND 525 -1=DATE 526 -1=Time: 527 -1=Date: @ 528 -1=TIME & DATE SETTINGS 529 -1=TIME MENU USER LEVEL 530 -1=`READ TIME' OUTPUT 531 -1=`READ DATE' OUTPUT 532 -1=`SEND TIME' INPUT 533 -1=`SEND DATE' INPUT 534 -1=Time & Date Settings: 535 -1=Cannot register Time or Date Reference. @ 536 -1=Must restart Interact. @ 537 -1= << WARNING >> 538 -1=Setting an EARLIER time or date may cause 539 -1=inaccuracies when viewing or searching AMM and 540 -1=HTM log files. We recommend that you follow 541 -1=these steps: 542 -1= 543 -1= 1. Disable logging 544 -1= 2. Back up your log files 545 -1= 3. Erase the files 546 -1= 4. Set the time or date 547 -1= 5. Resume logging 548 -1=Unable to send the time to the controller. 549 -1=Unable to send the date to the controller. 550 -1=Unable to read the time from the controller. 551 -1=Unable to read the date from the controller. 552 -1=Time reference undefined. 553 -1=Date reference undefined. 554 -1=Invalid time or date. 555 -1=Time was sent to the reference. 556 -1=Date was sent to the reference. 557 -1=Time was read from the reference. 558 -1=Date was read from the reference. 559 -1=EXT @ 560 -1=PRINTER RESOLUTION 561 -1=LOW 562 -1=MEDIUM 563 -1=HIGH 564 -1=Select Printer Resolution: @ 565 -1=`SEND TRIGGER' INPUT 566 -1=`READ TRIGGER' OUTPUT 567 -1=DOS Executable not found or not enough memory. @ 568 -1=LINK\EDIT_USER:A 569 -1=LINK\EDIT_PASSWORD:A 570 -1=Delete User 571 -1=Change password to 572 -1=User List is full. 573 -1=Unauthorized change. 574 00=1 YES 575 00=2 NO 576 00=1 OK 577 -1=EDIT USER/PASSWORD 578 -1=LINK\USER_NAME:A 579 -1=LANGUAGE SETTINGS 580 00=LANGUAGE @ 581 -1=SELECT LANGUAGE USER LEVEL 582 -1=Available Languages: 583 -1=Invalid user level. 584 -1=NEW LANGUAGE NAME: 585 -1=Select a language to remove: 586 -1=Select a language to rename: 587 -1=ENTER NEW LANGUAGE NAME: 588 -1=Cannot create new language subdirectory. 589 -1=Select a Language: 590 -1=Current Language @ 591 -1=STARTUP LANGUAGE 592 -1=LINK\LANGUAGE 593 -1=Cannot load AM.TXT file for 594 -1=Cannot switch languages in Test Mode. 595 -1=User level insufficient for language switch. 596 -1=SELECT 597 -1=Cannot load an application for 598 -1=Language Settings: 599 -1=LINK\CLEAR_PASSWORD 600 -1=LINK\CLEAR_USER @ 601 -1=Cannot delete current user. 602 -1=Cannot register reserved LINK reference. 603 -1=Cannot read text file for 604 -1=The first two characters of the language name 605 -1=must be unique. 606 -1=Name applications for 607 -1=Language name must be at least three characters. 608 -1=the Startup Language 609 -1=The Startup Language is 610 -1=LINK\APPLICATION:A 611 -1=The maximum number of languages is 10. 612 -1=Duplicate Password. 613 -1=P2 PowerStation 614 -1=Application incompatible with P2 PowerStation. 615 -1=P2 INTERACT APPLICATION MANAGER @ 616 -1=You have selected a P2 PowerStation application. 617 -1=Interact is not running in P2 mode. If you make 618 -1=changes to this application, it will no longer 619 -1=run on a P2 PowerStation. 620 -1= 621 -1=Are you sure you wish to load this application? 622 -1=If you wish to run P2 Interact, set the environment 623 -1=variable P2_INTERACT=YES. 624 -1=Tools will display and write data for Link and 625 -1=Demo Driver references. 626 -1=ENABLE CTS CHECKING 627 -1=Driver incompatible with DPMI operation. 628 -1=DRIVERS USE EXT. MEMORY 629 -1=AUTO 630 -1=Keypad + @ 631 -1=Windows Application Manager Version: 632 -1=Alarm Management @ 633 -1=LINK\VERSIONS:A 634 -1=LINK\MEMORY_DOS 635 -1=LINK\MEMORY_EXT 636 -1=LINK\EXIT 637 -1=LINK\CONTRAST 638 -1=LINK\BRIGHTNESS @ 639 -1=WAM 640 -1=RUNMODE ERROR DETECTED @ 641 -1=LINK\SCREEN_SAVER @ 642 -1=TSR_UPM_PROTECTION_ERROR 643 -1=to support this User Program. Refer to the User 644 -1=TSR_UDI_PROTECTION_ERROR 645 -1=to support this User Driver. Refer to the User @ 646 -1=NUMBER OF COLORS 647 -1=(*) RESTART INTERACT AFTER CHANGING. 648 -1=256 COLORS 649 -1=16 COLORS @ 650 -1=RESOLUTION TYPE 651 -1=320 x 240 652 -1=640 x 480 @ 653 -1=VIDEO: Unable to initialize video mode. 654 -1=VIDEO: Invalid device display mode. 655 -1=VIDEO: Memory allocation error. 656 -1=VIDEO: Protected-mode memory mapping error. 657 -1=VIDEO: Device does not respond. 658 -1=VIDEO: Loadable device driver not found. @ 659 -1=RIBBON COLOR 660 -1=BLACK 661 -1=BLK/RED 662 -1=RGB 663 -1=CYM 664 -1=CYMB 665 -1=Select Ribbon Color: @ 666 -1=PAPER SOURCE 667 -1=FORM/STD 668 -1=TRAY 1 669 -1=TRAY 2 670 -1=TRAY 3 671 -1=TRAY 4 672 -1=Select Paper Source: @ 673 -1=Warning, invalid AMPRINT.DVR file. 674 -1=(Error in AMPRINT.DVR file) @ 675 -1=11Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.