<!-- edited with XML Spy v1.3 - http://www.xmlspy.com--> <Data> <Application> <Name>Teflon</Name> <Comment>The Non-Stick Shell</Comment> <Version>EX-83073-107</Version> <Language>English</Language> </Application> <Strings> <Text ID="1001">ERROR: Insufficient graphical capability.</Text> <Text ID="1002">ERROR: Unable to setup graphics mode.</Text> <Text ID="1003">ERROR: Could not find a valid mouse driver.</Text> <Text ID="1004">ERROR: Mouse initialization failed.</Text> <Text ID="1005">ERROR: Application initialization failed.</Text> <Text ID="1006">ERROR: Invalid filename.</Text> <Text ID="1007">ERROR: Memory allocation failure.</Text> <Text ID="1008">ERROR: XML parser general failure.</Text> <Text ID="1009">ERROR: Invalid Arguments.</Text> <Text ID="1010">ERROR: Cannot open file.</Text> <Text ID="1011">ERROR: Error while reading from file.</Text> <Text ID="1012">ERROR: Invalid XML format encountered.</Text> <Text ID="1013">ERROR: Invalid TCP/IP configuration file.</Text> <Text ID="1014">ERROR: TCP/IP Initialization failed.</Text> <Text ID="1015">ERROR: TCP/IP Configuration failed.</Text> <Text ID="1016">ERROR: TCP/IP Initialization failed.</Text> <Text ID="1017">ERROR: TCP/IP call failure.</Text> <Text ID="1018">ERROR: Method sequence error.</Text> <Text ID="1019">ERROR: Resource string version mismatch (PSU.TXT).</Text> <Text ID="1020">ERROR: Unable to load resource strings.</Text> <Text ID="1021">ERROR: Menu resource version mismatch (MENUMAP.TXT).</Text> <Text ID="1100">ERROR: Unsupported bitmap type.</Text> <Text ID="1101">ERROR: Invalid BMP format encountered.</Text> <Text ID="1102">ERROR: Invalid PCX format encountered.</Text> <Text ID="1103">ERROR: Invalid PCX Header.</Text> <Text ID="1104">ERROR: Invalid bitmap color depth.</Text> <Text ID="1105">ERROR: Invalid BMP Header.</Text> <Text ID="1106">ERROR: MetaWINDOWs call failure.</Text> <Text ID="1107">ERROR: Could not create directory.</Text> <Text ID="1108">ERROR: Cannot copy file.</Text> <Text ID="1200">\nRESET SLOT CARD\n\nDo you really want to reset (i.e. reboot) the MachineLogic Slot Card (MLSC)?</Text> <Text ID="1201">\bMachineLogic is not responding.\b</Text> <Text ID="1202">\bMachineLogic not found.\b</Text> <Text ID="1203">Project: </Text> <Text ID="1204">\b(next boot will use </Text> <Text ID="1205">)\b</Text> <Text ID="1206">\bFound an MLSC, but there is a problem communicating with it.\b</Text> <Text ID="1207">\bFound an MLSC. Need version 2.X, but found version </Text> <Text ID="1208">\bFound an MLSC, but its IP/MASK were not updated.\b</Text> <Text ID="1209">\b</Text> <Text ID="1210">Ethernet I/O Port</Text> <Text ID="1350">Menu Manager error allocating memory during initialization.</Text> <Text ID="1351">Menu Manager error parsing MENUMAP.TXT.</Text> <Text ID="1352">Menu Manager error executing a button action.</Text> <Text ID="1353">Menu Manager error loading a main menu.</Text> <Text ID="1354">Menu Manager error loading a sub menu.</Text> <Text ID="1500">A KEYBOARD IS REQUIRED TO CALIBRATE THE TOUCHSCREEN.\nDO YOU WANT TO CONTINUE?</Text> <Text ID="1501">KEYBOARD TEST\n\nF1 INVOKES HELP.\nHIT ESC TWICE TO EXIT.</Text> <Text ID="1502">KEY PRESS: </Text> <Text ID="1503">Shift+</Text> <Text ID="1504">Ctrl+</Text> <Text ID="1505">Alt+</Text> <Text ID="1510">PowerStation SETTINGS</Text> <Text ID="1511">DISPLAY</Text> <Text ID="1512"> Brightness: </Text> <Text ID="1513"> Contrast: </Text> <Text ID="1520">Error loading language.</Text> <Text ID="1521">\nThere is no help topic for this item.</Text> <Text ID="1526"> Startup Program: </Text> <Text ID="1527">RUN MODE (MLSC)</Text> <Text ID="1528">STOP MODE (MLSC)</Text> <Text ID="1529">MAINT MODE (MLSC)</Text> <Text ID="1530">GENERAL SETTINGS</Text> <Text ID="1531">POWER ON OPERATION</Text> <Text ID="1532">INTERACT</Text> <Text ID="1533">SHELL</Text> <Text ID="1534"> MachineLogic: </Text> <Text ID="1535">RUN (MLPC)</Text> <Text ID="1536">DO NOT RUN (MLPC)</Text> <Text ID="1537">Display Type: </Text> <Text ID="1538">COLOR</Text> <Text ID="1539">MONOCROME</Text> <Text ID="1540">EL</Text> <Text ID="1541">File I/O error encountered while running Interact. Possibly out of disk space.</Text> <Text ID="1544">DIRECT SERIAL SETTINGS</Text> <Text ID="1545">Direct Serial Transfer: </Text> <Text ID="1546">DISABLED</Text> <Text ID="1547">COM1 (Port=3F8, IRQ=4)</Text> <Text ID="1548">COM2 (Port=2F8, IRQ=3</Text> <Text ID="1549">\c\bERROR\b\n\n\lDirect Serial could not be started due to a Port or IRQ conflict with a TCP/IP network.\nPlease check settings.</Text> <Text ID="1550">PROJECT INFORMATION</Text> <Text ID="1551">Project Name: </Text> <Text ID="1552">\b(not found)\b</Text> <Text ID="1554">Interact</Text> <Text ID="1555">MachineLogic</Text> <Text ID="1556">Modules: </Text> <Text ID="1557">Drivers: </Text> <Text ID="1558">Applications: </Text> <Text ID="1559">I/O Drivers: </Text> <Text ID="1560">No project is installed.</Text> <Text ID="1561">Restore completed successfully.\n\nNOTE: Be sure to update the MLSC. Use UTILITIES -> MACHINE LOGIC -> PROJECT FILES -> COPY TO SLOT CARD.\n\nWould you like to reboot to allow changes to take effect?</Text> <Text ID="1562">\n\l\b\nNOTE: Be sure you have up-to-date project files from the MLSC. Use UTILITIES -> MACHINE LOGIC -> PROJECT FILES -> COPY FROM SLOT CARD to get those files.</Text> <Text ID="1563">ERROR: Could not copy all files to the MLSC.</Text> <Text ID="1564">ERROR: Could not copy all files from the MLSC.</Text> <Text ID="1565">The project files have been successfully copied to the MLSC.\nWould you like to reboot to allow them to take effect?</Text> <Text ID="1570">SYSTEM INFORMATION</Text> <Text ID="1571">Processor:</Text> <Text ID="1572">Memory:</Text> <Text ID="1573">Conventional - </Text> <Text ID="1574">Extended - </Text> <Text ID="1575">KB Free</Text> <Text ID="1576">Floppy Disk</Text> <Text ID="1577">Not Installed</Text> <Text ID="1578">Hard Disk</Text> <Text ID="1579">Drives:</Text> <Text ID="1580">Device Driver</Text> <Text ID="1581">Ports:</Text> <Text ID="1585">VERSION INFORMATION</Text> <Text ID="1586">System:</Text> <Text ID="1587">System BIOS</Text> <Text ID="1588">VGA BIOS</Text> <Text ID="1589">BIOSTSR</Text> <Text ID="1590">DOS</Text> <Text ID="1591">Driver</Text> <Text ID="1592">TCP/IP</Text> <Text ID="1593">Client IP: </Text> <Text ID="1594">Shell:</Text> <Text ID="1595">RTXDOS</Text> <Text ID="1596">Control Card TSR</Text> <Text ID="1597">SERVER</Text> <Text ID="1598">SLOT CARD (S)</Text> <Text ID="1599">SLOT CARD (A)</Text> <Text ID="1600">AMD </Text> <Text ID="1601">Intel </Text> <Text ID="1602">8086/8088</Text> <Text ID="1603">80286</Text> <Text ID="1604">80386</Text> <Text ID="1605">80486DX</Text> <Text ID="1606">80486SX</Text> <Text ID="1607">80486DX2</Text> <Text ID="1608">80486SL</Text> <Text ID="1609">80486SX2</Text> <Text ID="1610">80486DX2 Write-Back Enhanced</Text> <Text ID="1611">80486DX4</Text> <Text ID="1612">80486DX4 Write-Back Enhanced</Text> <Text ID="1613">5x86 Write-Through Mode</Text> <Text ID="1614">5x86 Write-Back Mode</Text> <Text ID="1615">Pentium</Text> <Text ID="1616">Pentium II</Text> <Text ID="1617">Unknown</Text> <Text ID="1620">BACKUP PROJECT</Text> <Text ID="1621">BACKUP PATHS</Text> <Text ID="1622">PATH 1: </Text> <Text ID="1623">PATH 2: </Text> <Text ID="1624">PATH 3: </Text> <Text ID="1625">RESTORE PROJECT</Text> <Text ID="1626">RESTORE PATHS</Text> <Text ID="1627">Enter backup path 1:</Text> <Text ID="1628">Enter backup path 2:</Text> <Text ID="1629">Enter backup path 3:</Text> <Text ID="1630">Enter restore path 1:</Text> <Text ID="1631">Enter restore path 2:</Text> <Text ID="1632">Enter restore path 3:</Text> <Text ID="1633">Select project to restore:</Text> <Text ID="1640">SECURITY KEY #1</Text> <Text ID="1641">SECURITY KEY #2</Text> <Text ID="1642">Key not found</Text> <Text ID="1643">Serial Number: </Text> <Text ID="1644"> Key Number: </Text> <Text ID="1645">Module</Text> <Text ID="1646">Config</Text> <Text ID="1647">Runtime</Text> <Text ID="1648">Enabled</Text> <Text ID="1649">Disabled</Text> <Text ID="1650">Unused</Text> <Text ID="1651">Transferred</Text> <Text ID="1652">PTM</Text> <Text ID="1653">GMM</Text> <Text ID="1654">AMM</Text> <Text ID="1655">RCM</Text> <Text ID="1656">DTM</Text> <Text ID="1657">HTM</Text> <Text ID="1658">UPM</Text> <Text ID="1659">RPM</Text> <Text ID="1660">NBIOS</Text> <Text ID="1661">IMD</Text> <Text ID="1662">CAD</Text> <Text ID="1663">MCM</Text> <Text ID="1664">TIMER</Text> <Text ID="1665">OAM</Text> <Text ID="1666">ITR 5</Text> <Text ID="1667">TSR</Text> <Text ID="1668">CTECH</Text> <Text ID="1669">OEM</Text> <Text ID="1670">MLOGIC</Text> <Text ID="1675">Searching for security keys.\nPlease wait...</Text> <Text ID="1676">Searching for keys... Try </Text> <Text ID="1677">Reading key #</Text> <Text ID="1678">Programming... </Text> <Text ID="1679">Select module to transfer:</Text> <Text ID="1680">Select transfer type:</Text> <Text ID="1681">Transferring...</Text> <Text ID="1682">Programming key...\nPlease wait...</Text> <Text ID="1683">Transferring </Text> <Text ID="1684">.\nPlease wait...</Text> <Text ID="1685">The enable code that was entered is invalid.</Text> <Text ID="1686">The enable code is for an unrecognized module.</Text> <Text ID="1687">The module is already enabled or has been transferred.</Text> <Text ID="1688">Not enough keys found for transfer.</Text> <Text ID="1689">Source module is disabled or has already been transferred.</Text> <Text ID="1690">Destination module is already enabled.</Text> <Text ID="1691">Security key enable codes consist of eight digits.</Text> <Text ID="1692">Selected key is blank.</Text> <Text ID="1693">(NONE)</Text> <Text ID="1694">(NONE)</Text> <Text ID="1700">HARDWARE SETTINGS</Text> <Text ID="1701">Retentive Memory Size:</Text> <Text ID="1702">Memory Base Address:</Text> <Text ID="1703">Port Base Address:</Text> <Text ID="1704">Interrupt Request:</Text> <Text ID="1705">Power Fail:</Text> <Text ID="1706">WatchDog:</Text> <Text ID="1707">UCS Base Address:</Text> <Text ID="1708">UCS Interrupt Request:</Text> <Text ID="1709">KB</Text> <Text ID="1710">Port address must be between 200h and FFF8h.</Text> <Text ID="1711">Port address must be evenly divisible by 8.</Text> <Text ID="1712">Invalid port address.</Text> <Text ID="1713">Base address must be between C800h and EF00h.</Text> <Text ID="1714">Base address must be evenly divisible by 0100h.</Text> <Text ID="1715">Invalid base address.</Text> <Text ID="1716">\c\bWARNING\b\n\lThe retentive memory size has decreased. Control applications requiring larger retentive memory areas may cause unexpected system function. Would you like to delete your control application?</Text> <Text ID="1717">\c\bWARNING\b\n\lThe retentive memory size has decreased. Control applications requiring larger retentive memory areas may cause unexpected system function.</Text> <Text ID="1718">The system configuration has changed. Would you like to reboot to allow the changes to take effect?</Text> <Text ID="1720">MACHINE LOGIC</Text> <Text ID="1721">Mode:</Text> <Text ID="1722">System Status: </Text> <Text ID="1723">I/O Driver Status: </Text> <Text ID="1724">(MachineLogic is not functioning)</Text> <Text ID="1725">OFF (not functioning)</Text> <Text ID="1726">ON (but no project)</Text> <Text ID="1727">RUN</Text> <Text ID="1728">STOP</Text> <Text ID="1729">HALTED (at breakpoint)</Text> <Text ID="1730">UNKNOWN</Text> <Text ID="1731">NO ERROR</Text> <Text ID="1732">CPU Usage: </Text> <Text ID="1733">Runtime Target: </Text> <Text ID="1734">PC (MLPC)</Text> <Text ID="1735">SLOT CARD (MLSC)</Text> <Text ID="1736">OK</Text> <Text ID="1737"> OK. DUMMYIO (or no I/O in project)</Text> <Text ID="1738">UNKNOWN I/O DRIVER</Text> <Text ID="1739">DUMMYIO (or no I/O in project)</Text> <Text ID="1740">Interrupt must be between 68h and 80h.</Text> <Text ID="1741">Invalid interrupt.</Text> <Text ID="1745">\bThe slot card needed by this project was not found.\b</Text> <Text ID="1746">\bYou should either install a slot card, or do a complete download of a different project that does not need a slot card.\b</Text> <Text ID="1747">\bA slot card (MLSC) is installed in this workstation. A workstation with a slot card cannot run a project that has a runtime target of MLPC.\b</Text> <Text ID="1748">\bYou should either remove the slot card, or do a complete download of a different project that does not need the MLPC.\b</Text> <Text ID="1750">TASK INFORMATION</Text> <Text ID="1751">Task Count: </Text> <Text ID="1752">Task Number: </Text> <Text ID="1753">Task Name: </Text> <Text ID="1754">Task Priority: </Text> <Text ID="1755">Task Period: </Text> <Text ID="1756">Task Duration: </Text> <Text ID="1757">Task Minimum Duration: </Text> <Text ID="1758">Task Maximum Duration: </Text> <Text ID="1759">Task Average Duration: </Text> <Text ID="1760">Task Delay: </Text> <Text ID="1761">Task Minimum Delay: </Text> <Text ID="1762">Task Maximum Delay: </Text> <Text ID="1763">Task Average Delay: </Text> <Text ID="1764">SELECT RETENTIVE MEMORY SIZE</Text> <Text ID="1765">SELECT CONTROL ADAPTER IRQ</Text> <Text ID="1766">SELECT UCS ADAPTER IRQ</Text> <Text ID="1780">TO</Text> <Text ID="1781">BACKING UP PROJECT</Text> <Text ID="1782">Please wait...</Text> <Text ID="1783">FROM</Text> <Text ID="1784">RESTORING PROJECT</Text> <Text ID="1785">The archive file already exists. Do you want to replace it?</Text> <Text ID="1786">No backups found.</Text> <Text ID="1787">Backup completed successfully.</Text> <Text ID="1788">Backup failed.</Text> <Text ID="1789">Unable to create or access backup path.</Text> <Text ID="1790">Error deleting files in temporary directory.</Text> <Text ID="1800">Interact Runtime</Text> <Text ID="1801">Interact Applications</Text> <Text ID="1802">MachineLogic Files</Text> <Text ID="1803">MachineShop Files</Text> <Text ID="1804">Interact Startup Files</Text> <Text ID="1805">MachineLogic AppFiles</Text> <Text ID="1810">Insert a new Backup disk.</Text> <Text ID="1811">Backup drive not ready.</Text> <Text ID="1812">Not enough free space left of the Backup disk.</Text> <Text ID="1813">Insert Backup disk #</Text> <Text ID="1814">Restoring a project will erase your current project. Are you sure?</Text> <Text ID="1815">Restore cancelled.</Text> <Text ID="1816">Backup cancelled.</Text> <Text ID="1817">ERROR: Restore failed.</Text> <Text ID="1818">Restore completed successfully. Would you like to reboot to allow changes to take effect?</Text> <Text ID="1820">Error in zipfile</Text> <Text ID="1821">Severe error in zipfile</Text> <Text ID="1822">Insufficient memory (during initialization)</Text> <Text ID="1823">Insufficient memory (password failure)</Text> <Text ID="1824">Insufficient memory (file decompression)</Text> <Text ID="1825">Insufficient memory (memory decompression)</Text> <Text ID="1826">Insufficient memory (not yet used)</Text> <Text ID="1827">Zipfile not found</Text> <Text ID="1828">Bad or illegal parameters specified</Text> <Text ID="1829">No files found</Text> <Text ID="1830">Disk full</Text> <Text ID="1831">Unexpected EOF</Text> <Text ID="1832">Unknown error</Text> <Text ID="1840">Unexpected end of zip file</Text> <Text ID="1841">Zip file structure error</Text> <Text ID="1842">Out of memory</Text> <Text ID="1843">Internal logic error</Text> <Text ID="1844">Entry too large to split</Text> <Text ID="1845">Invalid comment format</Text> <Text ID="1846">Zip test (-T) failed or out of memory</Text> <Text ID="1847">User interrupt or termination</Text> <Text ID="1848">Error using a temp file</Text> <Text ID="1849">Read or seek error</Text> <Text ID="1850">Nothing to do</Text> <Text ID="1851">Missing or empty zip file</Text> <Text ID="1852">Error writing to a file: disk error or out of disk space.</Text> <Text ID="1853">Path not found, unable to create file, or out of disk space.</Text> <Text ID="1854">Bad command line</Text> <Text ID="1855">Could not open a specified file to read</Text> <Text ID="1860">NOTICE\n\nThis workstation is exchanging files with the MachineLogic Slot Card (MLSC).\n\nPlease wait for the exchange to complete.</Text> <Text ID="1861">Do you want to copy project files from this workstation to the MachineLogic Slot Card (MLSC)?</Text> <Text ID="1862">Do you want to copy project files from the MachineLogic Slot Card (MLSC) to this workstation?</Text> <Text ID="2000">Internal error.</Text> <Text ID="2001">Error List</Text> <Text ID="2002">NOTICE\n\nA development system is exchanging files with this workstation.\n\nPlease wait for the exchange to complete.</Text> <Text ID="2003">Error Code = </Text> <Text ID="2004">File: </Text> <Text ID="2005">Line: </Text> <Text ID="2006">Details: </Text> <Text ID="2200">TCP/IP SETTINGS</Text> <Text ID="2201">API Interrupt: </Text> <Text ID="2202">MachineShop Net Name: </Text> <Text ID="2203">TCP/IP is Enabled</Text> <Text ID="2204">TCP/IP is Disabled</Text> <Text ID="2205">Enter new MachineShop Net Name:</Text> <Text ID="2206">None</Text> <Text ID="2207"> (DOWNLOAD ONLY)</Text> <Text ID="2208"> Not configured.</Text> <Text ID="2209"> Gateway: </Text> <Text ID="2210">NET </Text> <Text ID="2211"> Interface: </Text> <Text ID="2212"> IRQ: </Text> <Text ID="2213"> Port: </Text> <Text ID="2214"> Baud: </Text> <Text ID="2215"> IP Address: </Text> <Text ID="2216"> IP Mask: </Text> <Text ID="2217">TCP/IP NETWORK SETTINGS</Text> <Text ID="2218">Enter new IP Address:</Text> <Text ID="2219">Enter new IP Mask:</Text> <Text ID="2220">Some configuration settings (that require a reboot to take effect) have been changed. Would you like to reboot now?</Text> <Text ID="2221">DHCP</Text> <Text ID="2222">Unknown</Text> <Text ID="2223"> Searching for CTC TCP/IP Stack...</Text> <Text ID="2224"> TCP/IP Stack found at interrupt </Text> <Text ID="2225"> TCP/IP Stack not found.</Text> <Text ID="2226"> Reading TCP/IP configuration...</Text> <Text ID="2227"> Initializing </Text> <Text ID="2228">Initializing TCP/IP handler...</Text> <Text ID="2229">\nWARNING\nIncompatible version of TCP/IP stack\nfound.\nTCP/IP functions and downloads will\nbe disabled.</Text> <Text ID="2230">Invalid API Interrupt entered.</Text> <Text ID="2231">API Interrupt out of range. Please enter a value between 60h and FFh.</Text> <Text ID="2232">Enter new Gateway Address:</Text> <Text ID="2233"> Interrupt: </Text> <Text ID="2235">\c\bWARNING\b\n\n\lThe serial interface does not support DHCP.</Text> <Text ID="2236">\c\bERROR\b\n\n\lGeneral failure initializing network interface.\nPlease confirm configuration.</Text> <Text ID="2237">\nWARNING\nThe TCP/IP Stack detected a fault.\nTCP/IP downloads will be disabled.\nStack was found at interrupt </Text> <Text ID="2250">FTP SETTINGS</Text> <Text ID="2251">User Name: </Text> <Text ID="2252">Enter new FTP user name:</Text> <Text ID="2253">Enter old FTP password:</Text> <Text ID="2254">Enter new FTP password:</Text> <Text ID="2255">Confirm new FTP password:</Text> <Text ID="2256">Invalid password entered.</Text> <Text ID="2257">New password and confirmation do not match. Please enter the new password again.</Text> <Text ID="2270">\nYour selection cannot be accepted because it conflicts with the IRQ assigned to the touchscreen.</Text> <Text ID="2271">\nYour selection cannot be accepted because it conflicts with the IRQ assigned to the mouse.</Text> <Text ID="2272">\nYour selection cannot be accepted because it conflicts with the IRQ assigned to the MachineLogic Control Adapter.</Text> <Text ID="2273">\nYour selection cannot be accepted because it conflicts with the IRQ assigned to the UCS adapter.</Text> <Text ID="2274">\nYour selection conflicts with the IRQ assigned to TCP/IP Net 1.\n\nDo you want to keep this selection and disable Net 1?</Text> <Text ID="2275">\nYour selection conflicts with the IRQ assigned to TCP/IP Net 2.\n\nDo you want to keep this selection and disable Net 2?</Text> <Text ID="2276">\nYour selection conflicts with the IRQ assigned to TCP/IP Net 3.\n\nDo you want to keep this selection and disable Net 3?</Text> <Text ID="2277">\nYour selection conflicts with the IRQ assigned to Direct Serial.\n\nDo you want to keep this selection and disable Direct Serial?</Text> <Text ID="2278">\nYour selection conflicts with the Port assigned to TCP/IP Net 1.\n\nDo you want to keep this selection and disable Net 1?</Text> <Text ID="2279">\nYour selection conflicts with the Port assigned to TCP/IP Net 2.\n\nDo you want to keep this selection and disable Net 2?</Text> <Text ID="2280">\nYour selection conflicts with the Port assigned to TCP/IP Net 3.\n\nDo you want to keep this selection and disable Net 3?</Text> <Text ID="2281">\nYour selection conflicts with the Port assigned to Direct Serial.\n\nDo you want to keep this selection and disable Direct Serial?</Text> <Text ID="2290">Error occurred while writing to INI file. Possibly not enough disk space.</Text> <Text ID="2291">Could not update value on MLSC.</Text> <Text ID="2300">KEY CONFIGURATION</Text> <Text ID="2301">Shift Mode: </Text> <Text ID="2302">Selection Key: </Text> <Text ID="2303">Momentary</Text> <Text ID="2304">Lock</Text> <Text ID="2305">Lock/Release</Text> <Text ID="2400">\c\bERROR - INVALID TIME\b\n\n\lPlease re-enter time.\nSyntax is 24 hr (military) clock in HH:MM:SS format.</Text> <Text ID="2401">\c\bERROR - INVALID DATE\b\n\n\lPlease re-enter date.\nValid dates are between 1980 and 2099 in MM/DD/YYYY format.</Text> <Text ID="2402">Current Time is </Text> <Text ID="2403">Present Date: </Text> <Text ID="2500">\c\bERROR\b\n\n\lGeneral failure creating temporary directory on local hard drive. Approximately 2MB of local disk space must be reserved for disk spanning calculations.</Text> <Text ID="3000">`~</Text> <Text ID="3001">1!</Text> <Text ID="3002">2@</Text> <Text ID="3003">3#</Text> <Text ID="3004">4$</Text> <Text ID="3005">5%</Text> <Text ID="3006">6^</Text> <Text ID="3007">7&</Text> <Text ID="3008">8*</Text> <Text ID="3009">9(</Text> <Text ID="3010">0)</Text> <Text ID="3011">-_</Text> <Text ID="3012">=+</Text> <Text ID="3013">Backsp</Text> <Text ID="3014">Tab</Text> <Text ID="3015">Qq</Text> <Text ID="3016">Ww</Text> <Text ID="3017">Ee</Text> <Text ID="3018">Rr</Text> <Text ID="3019">Tt</Text> <Text ID="3020">Yy</Text> <Text ID="3021">Uu</Text> <Text ID="3022">Ii</Text> <Text ID="3023">Oo</Text> <Text ID="3024">Pp</Text> <Text ID="3025">[{</Text> <Text ID="3026">]}</Text> <Text ID="3027">\\\\|</Text> <Text ID="3028">CapsLock</Text> <Text ID="3029">Aa</Text> <Text ID="3030">Ss</Text> <Text ID="3031">Dd</Text> <Text ID="3032">Ff</Text> <Text ID="3033">Gg</Text> <Text ID="3034">Hh</Text> <Text ID="3035">Jj</Text> <Text ID="3036">Kk</Text> <Text ID="3037">Ll</Text> <Text ID="3038">;:</Text> <Text ID="3039">'"</Text>, <Text ID="3040">Enter</Text> <Text ID="3041">Lt Shift</Text> <Text ID="3042">Zz</Text> <Text ID="3043">Xx</Text> <Text ID="3044">Cc</Text> <Text ID="3045">Vv</Text> <Text ID="3046">Bb</Text> <Text ID="3047">Nn</Text> <Text ID="3048">Mm</Text> <Text ID="3049">,<</Text> <Text ID="3050">.></Text> <Text ID="3051">/?</Text> <Text ID="3052">Rt Shift</Text> <Text ID="3053">Lt Ctrl</Text> <Text ID="3054">Lt Alt</Text> <Text ID="3055">Space</Text> <Text ID="3056">Rt Alt</Text> <Text ID="3057">Rt Ctrl</Text> <Text ID="3058">Insert</Text> <Text ID="3059">Delete</Text> <Text ID="3060">Left</Text> <Text ID="3061">Home</Text> <Text ID="3062">End</Text> <Text ID="3063">Up</Text> <Text ID="3064">Down</Text> <Text ID="3065">PgUp</Text> <Text ID="3066">PgDn</Text> <Text ID="3067">Right</Text> <Text ID="3068">NumLock</Text> <Text ID="3069">7 Home</Text> <Text ID="3070">4 Left</Text> <Text ID="3071">1 End</Text> <Text ID="3072">/</Text> <Text ID="3073">8 Up</Text> <Text ID="3074">5</Text> <Text ID="3075">2 Down</Text> <Text ID="3076">0 Insert</Text> <Text ID="3077">*</Text> <Text ID="3078">9 PgUp</Text> <Text ID="3079">6 Right</Text> <Text ID="3080">3 PgDn</Text> <Text ID="3081">. Delete</Text> <Text ID="3082">-</Text> <Text ID="3083">+</Text> <Text ID="3084">Enter</Text> <Text ID="3085">Escape</Text> <Text ID="3086">F1</Text> <Text ID="3087">F2</Text> <Text ID="3088">F3</Text> <Text ID="3089">F4</Text> <Text ID="3090">F5</Text> <Text ID="3091">F6</Text> <Text ID="3092">F7</Text> <Text ID="3093">F8</Text> <Text ID="3094">F9</Text> <Text ID="3095">F10</Text> <Text ID="3096">F11</Text> <Text ID="3097">F12</Text> <Text ID="3098">Rt Shift</Text> <Text ID="3099">Lt Shift</Text> <Text ID="3100">Ctrl</Text> <Text ID="3101">Alt</Text> <Text ID="3102">ScrlLock</Text> <Text ID="3103">NumLock</Text> <Text ID="3104">CapsLock</Text> <Text ID="3105">Insert</Text> <Text ID="3106">Lt Ctrl</Text> <Text ID="3107">Lt Alt</Text> <Text ID="3108">Sysreq</Text> <Text ID="5321">SELECT NETWORK INTERFACE IRQ</Text> <Text ID="5323">SELECT NEW BAUD RATE</Text> <!--ML System Errors--> <Text ID="6000">Description not available.</Text> <Text ID="6001">System error : Memory task error number %u.</Text> <Text ID="6002">System error : Communication task error number %u.</Text> <Text ID="6003">System error : Debug task error number %u.</Text> <Text ID="6004">System error : Root task error number %u.</Text> <Text ID="6005">Code gen. error : No code for module %u.</Text> <Text ID="6006">Code gen. error : WN %u: Not enough memory in PLC.</Text> <Text ID="6007">Code gen. error : WN %u: Instruction not implemented or incorrect data type.</Text> <Text ID="6008">Code gen. error : WN %u: Code exceeds 64K limit.</Text> <Text ID="6009">Code gen. error : WN %u: Missing Label.</Text> <Text ID="6010">Code gen. error : WN %u: Error passing parameter.</Text> <Text ID="6011">Code gen. error : WN %u: Nesting level of parenthesis exceeded.</Text> <Text ID="6012">Code gen. error : WN %u: Nesting error.</Text> <Text ID="6013">Code gen. error : WN %u: Undefined parameter.</Text> <Text ID="6014">Code gen. error : WN %u: Automatic datatype conversion of operand not possible.</Text> <Text ID="6015">Code gen. error : WN %u: Automatic datatype conversion of accumulator not possible.</Text> <Text ID="6016">Code gen. error : WN %u: Maximum number of errors reached, code generation stopped.</Text> <Text ID="6017">Code gen. error : Error(s) occurred in POU %u during code generation.</Text> <Text ID="6018">Code gen. error : WN %u: Operand not implemented or area exceeded.</Text> <Text ID="6019">Code gen. error : WN %u: Illegal data type of accumulator (expecting ANYNUM).</Text> <Text ID="6020">Code gen. error : WN %u: Illegal data type of accumulator (expecting ANYBIT).</Text> <Text ID="6021">Code gen. error : WN %u: Data type of accumulator not valid.</Text> <Text ID="6022">Code gen. error : WN %u: Selected index register not valid.</Text> <Text ID="6023">Code gen. error : WN %u: Illegal data type of accumulator.</Text> <Text ID="6024">Code gen. error : WN %u: Not all accumulator values that were pushed are popped.</Text> <Text ID="6025">Code gen. error : WN %u: Maximum number of accumulator pushes reached.</Text> <Text ID="6026">Code gen. error : WN %u: Tried to pop an accumulator which was not pushed.</Text> <Text ID="6027">Code gen. error : Versions of used MSFC doesn't match.</Text> <Text ID="6028">Code gen. error : No MSFC data to run project. PLC reset.</Text> <Text ID="6029">Code gen. error : Inline code too large.</Text> <Text ID="6030">Memory error : POU '%u' invalid.</Text> <Text ID="6031">Memory error : POU '%u' has unknown POU type.</Text> <Text ID="6032">Memory error : Not enough memory on PLC for POU '%u' during insertion.</Text> <Text ID="6033">Memory error : POU '%u' exceeds 64K module size during insertion.</Text> <Text ID="6034">Memory error : Tried to insert POU '%u' that does not belong to this project.</Text> <Text ID="6035">Memory error : Error in memory management.</Text> <Text ID="6036">Memory error : Inserting POU.</Text> <Text ID="6037">Memory error : Memory reorganization not possible, PLC stopped.</Text> <Text ID="6038">Memory error : Memory error for initialized data of POU '%u'.</Text> <Text ID="6039">Memory error : Acception of retain CRC failed.</Text> <Text ID="6040">Memory error : Not all POU sent.</Text> <Text ID="6041">Memory error : No program memory defined.</Text> <Text ID="6042">Memory error : Invalid FB number %u.</Text> <Text ID="6043">Memory error : Invalid PG number %u.</Text> <Text ID="6044">Memory error : Invalid SPG number %u.</Text> <Text ID="6045">Run-time error : Invalid function or function block %u.</Text> <Text ID="6046">Run-time error : Invalid program %u.</Text> <Text ID="6047">Run-time error : Unknown system mode. PLC stopped.</Text> <Text ID="6048">Run-time error : Division by 0. PLC stopped.</Text> <Text ID="6049">Run-time error : Bus error. PLC stopped.</Text> <Text ID="6050">Run-time error : Stack overflow. PLC stopped.</Text> <Text ID="6051">Run-time error : Error during indirect variable access.</Text> <Text ID="6052">Run-time error : Watchdog exceeded in task %u.</Text> <Text ID="6053">Run-time error : Error in task configuration.</Text> <Text ID="6054">Run-time error : Error in I/O configuration.</Text> <Text ID="6055">Run-time error : CPU is occupied with %u percent, PLC stopped.</Text> <Text ID="6056">Run-time error : Initializing I/O driver failed.</Text> <Text ID="6057">Run-time error : Breakpoint unexpected, PLC stopped.</Text> <Text ID="6058">Run-time error : Unknown I/O driver.</Text> <Text ID="6059">Run-time error : Error in data configuration.</Text> <Text ID="6060">Run-time error : Error in retain data configuration.</Text> <Text ID="6061">Run-time error : Critical error in floating point processor.</Text> <Text ID="6062">Run-time error : Fatal error.</Text> <Text ID="6063">Run-time error : String error.</Text> <Text ID="6064">I/O config error : Invalid type of module.</Text> <Text ID="6065">I/O config error : Too many data requested.</Text> <Text ID="6066">I/O config error : Less data send.</Text> <Text ID="6067">I/O config error : Installation of I/O-Driver %u failed.</Text> <Text ID="6068">I/O config error : Data group exceeds limit of 64K.</Text> <Text ID="6069">I/O config error : Out of memory (dynamic memory).</Text> <Text ID="6070">I/O config error : Invalid group for retain data.</Text> <Text ID="6071">Warning : Not enough conventional memory.</Text> <Text ID="6072">Warning : Warm Start not possible - Date or Time Stamp conflict.</Text> </Strings> <Menus> <Text ID="1001">RUN</Text> <Text ID="1002">SETTINGS</Text> <Text ID="1003">INFO</Text> <Text ID="1004">UTILITIES</Text> <Text ID="1005">LANGUAGE</Text> <Text ID="1006">EXIT</Text> <Text ID="1011">INTERACT</Text> <Text ID="1021">GENERAL</Text> <Text ID="1022">POWER STATION</Text> <Text ID="1023">TCP/IP</Text> <Text ID="1024">FTP</Text> <Text ID="1025">DIRECT SERIAL</Text> <Text ID="1031">SYSTEM</Text> <Text ID="1032">VERSIONS</Text> <Text ID="1041">BACKUP</Text> <Text ID="1042">RESTORE</Text> <Text ID="1043">SECURITY KEY</Text> <Text ID="1044">MACHINE LOGIC</Text> <Text ID="1101">BACK</Text> <Text ID="1102">STARTUP PROGRAM</Text> <Text ID="1103">MACHINE LOGIC</Text> <Text ID="1104">DISPLAY TYPE</Text> <Text ID="1105">TIME/DATE</Text> <Text ID="1106">TRANSFER</Text> <Text ID="1121">INTERACT</Text> <Text ID="1122">SHELL</Text> <Text ID="1131">YES</Text> <Text ID="1132">NO</Text> <Text ID="1133">AT POWER ON?</Text> <Text ID="1134">RUN</Text> <Text ID="1135">DO NOT RUN</Text> <Text ID="1136">RUN MODE</Text> <Text ID="1137">STOP MODE</Text> <Text ID="1141">COLOR</Text> <Text ID="1142">MONO</Text> <Text ID="1143">EL</Text> <Text ID="1151">TIME</Text> <Text ID="1152">DATE</Text> <Text ID="1161">COM1</Text> <Text ID="1162">COM2</Text> <Text ID="1163">DISABLE</Text> <Text ID="1201">BACK</Text> <Text ID="1202">CALIBRATE TOUCHSCRN</Text> <Text ID="1203">KEYBOARD TEST</Text> <Text ID="1204">ADJUST BRIGHT</Text> <Text ID="1205">ADJUST CONTRAST</Text> <Text ID="1206">KEY CONFIG</Text> <Text ID="1301">BACK</Text> <Text ID="1401">BACK</Text> <Text ID="1501">BACK</Text> <Text ID="1502">PATH 1</Text> <Text ID="1503">PATH 2</Text> <Text ID="1504">PATH 3</Text> <Text ID="1506">CONFIGURE PATHS</Text> <Text ID="1561">PATH 1</Text> <Text ID="1562">PATH 2</Text> <Text ID="1563">PATH 3</Text> <Text ID="1601">BACK</Text> <Text ID="1602">PATH 1</Text> <Text ID="1603">PATH 2</Text> <Text ID="1604">PATH 3</Text> <Text ID="1606">CONFIGURE PATHS</Text> <Text ID="1661">PATH 1</Text> <Text ID="1662">PATH 2</Text> <Text ID="1663">PATH 3</Text> <Text ID="1701">BACK</Text> <Text ID="1702">ENABLE MODULE</Text> <Text ID="1703">TRANSFER MODULE</Text> <Text ID="1704">VIEW KEY #2</Text> <Text ID="1731">FROM KEY #1</Text> <Text ID="1732">TO KEY #1</Text> <Text ID="1801">BACK</Text> <Text ID="1802">STOP</Text> <Text ID="1803">START</Text> <Text ID="1804">RESET</Text> <Text ID="1805">TASK INFO</Text> <Text ID="1806">HARDWARE SETTINGS</Text> <Text ID="1807">PROJECT FILES</Text> <Text ID="1822">ARE YOU SURE?</Text> <Text ID="1831">COLD</Text> <Text ID="1832">WARM</Text> <Text ID="1833">HOT</Text> <Text ID="1901">BACK</Text> <Text ID="1902">RETENTIVE MEMORY</Text> <Text ID="1903">PORT ADDRESS</Text> <Text ID="1904">INTERRUPT REQUEST</Text> <Text ID="1905">POWER FAIL</Text> <Text ID="1906">WATCHDOG</Text> <Text ID="1907">UCS ADDRESS</Text> <Text ID="1908">UCS INTERRUPT</Text> <Text ID="1912">ETHERNET I/O</Text> <Text ID="1921">MEMORY SIZE</Text> <Text ID="1922">MEMORY ADDRESS</Text> <Text ID="1951">ENABLE</Text> <Text ID="1952">DISABLE</Text> <Text ID="1961">ENABLE</Text> <Text ID="1962">DISABLE</Text> <Text ID="1991">RUN</Text> <Text ID="1992">STOP</Text> <Text ID="2001">BACK</Text> <Text ID="2021">IP ADDRESS</Text> <Text ID="2022">IP MASK</Text> <Text ID="2031">COPY TO SLOT CARD</Text> <Text ID="2032">COPY FROM SLOT CARD</Text> <Text ID="2041">WATCHDOG</Text> <Text ID="2042">SLOT CARD</Text> <Text ID="2101">BACK</Text> <Text ID="2201">BACK</Text> <Text ID="2202">ENABLE</Text> <Text ID="2203">NET NAME</Text> <Text ID="2206">NET SETTINGS</Text> <Text ID="2222">Enable TCP/IP?</Text> <Text ID="2301">BACK</Text> <Text ID="2302">NET 1</Text> <Text ID="2303">NET 2</Text> <Text ID="2304">NET 3</Text> <Text ID="2311">IP ADDRESS</Text> <Text ID="2312">IP MASK</Text> <Text ID="2313">IFACE TYPE</Text> <Text ID="2314">PORT ADDRESS</Text> <Text ID="2315">IRQ / INTERRUPT</Text> <Text ID="2316">BAUD RATE</Text> <Text ID="2317">DOWNLOAD ONLY</Text> <Text ID="2318">GATEWAY IP</Text> <Text ID="2401">BACK</Text> <Text ID="2402">USER NAME</Text> <Text ID="2403">PASSWORD</Text> <Text ID="2501">BACK</Text> <Text ID="2601">BACK</Text> <Text ID="2602">SHIFT OPERATION</Text> <Text ID="2603">SELECTION KEY</Text> <Text ID="2621">MOMENTARY</Text> <Text ID="2622">LOCK</Text> <Text ID="2623">LOCK/ RELEASE</Text> <Text ID="2631">NONE</Text> <Text ID="2632">RIGHT SHIFT</Text> <Text ID="2633">LEFT SHIFT</Text> <Text ID="2701">BACK</Text> <Text ID="2702">PORT</Text> <Text ID="4921">DISABLED</Text> <Text ID="4922">4KB</Text> <Text ID="4923">8KB</Text> <Text ID="4924">16KB</Text> <Text ID="4925">32KB</Text> <!-- BASE_DYN_MENU = 9800, Begin BUTTON_... --> <Text ID="9800">PREV</Text> <Text ID="9801">NEXT</Text> <Text ID="9802">0</Text> <Text ID="9803">1</Text> <Text ID="9804">2</Text> <Text ID="9805">3</Text> <Text ID="9806">4</Text> <Text ID="9807">5</Text> <Text ID="9808">6</Text> <Text ID="9809">7</Text> <Text ID="9810">8</Text> <Text ID="9811">9</Text> <Text ID="9812">ESC</Text> <Text ID="9813">BACKSPACE</Text> <Text ID="9814">ENTER</Text> <Text ID="9815">A</Text> <Text ID="9816">B</Text> <Text ID="9817">C</Text> <Text ID="9818">D</Text> <Text ID="9819">E</Text> <Text ID="9820">F</Text> <Text ID="9821">10(A)</Text> <Text ID="9822">11(B)</Text> <Text ID="9823">12(C)</Text> <Text ID="9824">15(F)</Text> <Text ID="9825">YES <ENTER></Text> <Text ID="9826">NO</Text> <Text ID="9827">:</Text> <Text ID="9828">DISABLE</Text> <Text ID="9829">/</Text> <Text ID="9830">INCREASE</Text> <Text ID="9831">DECREASE</Text> <Text ID="9834">OK <ENTER></Text> <Text ID="9835">CANCEL <ESC></Text> <Text ID="9840">CONFIG</Text> <Text ID="9841">RUNTIME</Text> <Text ID="9842">DEVELOP</Text> <Text ID="9845">UP</Text> <Text ID="9846">DOWN</Text> <Text ID="9880">HELP</Text> </Menus> </Data>Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.