DEFAULT.INI Driver File Contents (xracing.zip)

ÿþ;

; Psxpad Setup and Property Language File

;

; Ver 0.9.2003.0508

;

; English

;

; ----------------------------------------

; Update

;  0.9.2003.0131

;   Setup_SetupIsAdministratorOnly

;   Setup_ThisWindowsIsNotSupported

;   Setup_OldVerUndeleted

;

;  0.9.2003.0209

;   Button_ADThreshold

;

;  0.9.2003.0508

;   Finish_RebootAndRetry

; ----------------------------------------



[Setup]



Setup_SetupIsAdministratorOnly=Administrator authority is required for an setup.

Setup_ThisWindowsIsNotSupported=This Windows is not supported.

Setup_OldVerUndeleted=Please uninstall the driver of an old version.



;   ---------

; < Main Page > -------------------------------------------

;   ---------



Main_Header_Title=Welcome

Main_Header_Message=A program is installed, setting change , and uninstalled.



Main_Message=Welcome to XB-001 USB Controller setup program!\n\nIf this program is used, installation, setting change, and uninstallation can be performed.\nPlease choose the following option.



Main_Install =Install

Main_Install_Description =A required component is copied and set to PC.

Main_Setting =Setting change

Main_Setting_Description =A setting of the component installed is changed.

Main_UnInstall =Uninstall

Main_UnInstall_Description =All the components installed are deleted.



;   ---------

; < Model Page > -------------------------------------------

;   ---------

Model_Header_Title=Connection model

Model_Header_Message=Please choose the connection model .



Model_Message=Please choose the connection model which you use.



Model_Playstation=Play Station

Model_PlayStation_Description=The pad of Playstation is connected.



Model_Saturn=Saturn

Model_Saturn_Description=The pad of Saturn is connected.



Model_Snes=SNES

Model_Snes_Description=The pad of SNES is connected.



Model_N64=Nintendo64

Model_N64_Description=The pad of Nintendo64 is connected.



;   ------------

; < Connect Page > -------------------------------------------

;   ------------



Connect_Header_Title =Connection type

Connect_Header_Message =Please choose the connection type.



Connect_Message =Please choose the connection type which you use.



;<PlayStation>-------------

Connect_Standard =Standard

Connect_Standard_Description =1-2 pads are connected by Standard connection.

Connect_Mega =MegaTap

Connect_Mega_Description =1-5 pads are connected by Mega-tap connection.

Connect_Multi =MultiTap

;Change-Start

Connect_Multi_Description =1-5 pads are connected by the Multi-tap.

;Change-End



;<Saturn>-------------

Connect_Saturn_Standard =Standard

Connect_Saturn_Standard_Description =1-2 pads are connected by Standard connection.

Connect_Saturn_Multi =MultiTap

Connect_Saturn_Multi_Description =1-6 pads are connected by the Multi-tap.



;<Snes>-------------

Connect_Snes_Standard =Standard

Connect_Snes_Standard_Description =1-4 pads are connected by Standard connection.

Connect_Snes_Multi =MultiTap

Connect_Snes_Multi_Description =1-4 pads are connected by the Multi-tap.



;<Nintendo64>-------------

Connect_N64_Standard =Standard

Connect_N64_Standard_Description =1-4 pads are connected by Standard connection.

Connect_N64_Pic =Pic¥c}

Connect_N64_Pic_Description =1-5 pads are connected by the Pic.



;<GameCube>-------------

Connect_GC_Pic =Pic

Connect_GC_Pic_Description =1-5 pads are connected by the Pic.





;   -------------

; < Port Max Page > -------------------------------------------

;   -------------

PortMax_Header_Title =The number of used pads

PortMax_Header_Message =Please choose the number of the pads to be used.



PortMax_Message =Please choose the number of the pads to connect.



PortMax_ValueError =A value is inaccurate.



;   -------------

; < Advanced Page > -------------------------------------------

;   -------------



Advanced_Header_Title =Advanced setting

Advanced_Header_Message =Advanced setting is perform.



Advanced_Message =Advanced setting is perform.



Advanced_IOAddress =I/O Address of a parallel port



;Change-Start

;Advanced_ClockLength =Time of the clock to a pad.

Advanced_ProgramFolder =The folder which installs a program.

;Change-End



Advanced_UnacquireIO=I/O Address was unacquirable. Please set up manually.



;   ----------

; < Check Page > -------------------------------------------

;   ----------



;Use Connect_Standard,Connect_Mega,Connect_Multi



Check_Header_Title =The check of execution

Check_Header_Message =This is the last check of execution.



Check_Message =The following processings are performed. Is This all right?



Check_Install =A file is copied to Windows which exists to "%WinFolder%".\n\nAs follows, a registry is set up.\n- Connect of %ConnectModel% Pad.\n- Connect at %ConnectType%.\n- %MaxPort% pads are connectable.\n- 0x%IOAddress% is used for a I/OAddress.\n

Check_Setting =As follows, a registry is set up.\n- Connect of %ConnectModel% Pad.\n- Connect at %ConnectType%.\n- %MaxPort% pads are connectable.\n- 0x%IOAddress% is used for a I/OAddress.\n

Check_UnInstall =A related file and registry is deleted from "%WinFolder%" of Windows.



;   -----------

; < Finish Page > -------------------------------------------

;   -----------



Finish_Header_Title =The finish of an setup

Finish_Header_Message =The setup was completed.



Finish_Success =The setup was successful and was completed.

Finish_SuccessReboot =The setup was successful and was completed.\n\nA reboot is required.

Finish_Failure =Setup Has Failed.

Finish_RebootAndRetry=Run this program again after the reboot.

Finish_Log =Setup log





;///////////////////////////////

; Property

;///////////////////////////////

[Property]



;   ------------

; < General Page > -------------------------------------------

;   ------------

General_Title=General

General_Type=Type

;Delete General_Mode=Mode

General_Axis=Axis

General_Buttons=Buttons

;Delete General_ButtonsConfig=Buttons Config

;Delete General_Default=Default



;Change-Start

General_Preset=Preset

General_Save=Save

General_Delete=Delete

General_Preset_Default=Default

General_Pov=Pov

General_Sliders=Slider

;Change-End



General_NotConnect=Not Connect

General_Digital=Digital Pad

General_Analog=Analog Pad



;Change-Start

General_DualShock=Dual Shock(Digital Mode)

;Change-End



General_DualShock2=Dual Shock2

General_Negcon=Negcon



;Change-Start

General_DualShock2Analog=Dual Shock(Analog Mode)

;Change-End



General_SaturnStandardPad=Saturn Standard Pad

General_SaturnMultiController=Saturn Multi Controller

General_SnesStandardPad=SNES Standard Pad

General_N64StandardPad=Nintendo64 Standard Pad



;Change-Start

General_XboxStandardPad=XB-001 USB Controller Pad

;General_XboxStandardPad=Xbox Standard Pad

General_GameCubeStandardPad=GameCube Standard Pad

;Change-End





General_RemoveDevice=Since the device was removed, a property is closed.





;   -----------

; < Axis Page   > -------------------------------------------

;   -----------



;Change-Start

Axis_Title=Axis

Axis_X=Axis - X

Axis_Y=Axis - Y

Axis_Z=Axis - Z

Axis_Rx=Axis - Rx

Axis_Ry=Axis - Ry

Axis_Rz=Axis - Rz



Axis_A_Curve=A Curve

Axis_B_Curve=B Curve

Axis_C_Curve=C Curve



Axis_Pov_X=Pov X

Axis_Pov_Y=Pov Y



Axis_Slider_1=Slider 1

Axis_Slider_2=Slider 2



Axis_Default=Default



Axis_None=None

Axis_Digital_X=Digital X

Axis_Digital_Y=Digital Y

Axis_Analog_X=Analog X

Axis_Analog_Y=Analog Y

Axis_Analog_Lx=Analog LX

Axis_Analog_Ly=Analog LY

Axis_Analog_Rx=Analog RX

Axis_Analog_Ry=Analog RY

Axis_Analog_L=Analog L

Axis_Analog_R=Analog R

Axis_Analog_I=Analog I

Axis_Analog_II=Analog II

Axis_Analog_I_II=Analog I+II

Axis_Digital_CX=Digital CX

Axis_Digital_CY=Digital CY

;Change-End



;   -----------

; < Button Page > -------------------------------------------

;   -----------



;Change-Start

Button_Title=Buttons

Button_Buttons=Buttons

Button_ButtonsConfig=Buttons Config

Button_ADThreshold=A threshold in the A/D conversion.(LR Only)

Button_Default=Default

;Change-End



;   -----------

; < Effect Page > -------------------------------------------

;   -----------



Effect_Title=Force Feedback

Effect_Preset=Preset

Effect_Add=Add

Effect_Delete=Delete



Effect_None=None

Effect_Small=small

Effect_Large=Large

Effect_Auto=Auto



Effect_Constant=Constant

Effect_Ramp=Ramp



Effect_Square=Square

Effect_Sine=Sine

Effect_Triangle=Triangle

Effect_SawtoothUp=Sawtooth Up

Effect_SawtoothDown=Sawtooth Down



Effect_Spring=Spring

Effect_Damper=Damper

Effect_Inertia=Inertia

Effect_Friction=Friction

Effect_Custom=Custom



Effect_Test=Force Feedback Test



Effect_PresetDeleteCheck=Are you sure you want to delete preset.

Effect_PresetOverWriteCheck=Are you sure you want to overwrite preset.



;   -------------

; < Advanced Page > -------------------------------------------

;   -------------



Advanced_Title=Advanced



;Change-Start

Advanced_ThisPadOnly=This Pad Only

Advanced_AllPad=All Pads

Advanced_DigitalModeAssignedXY=In digital mode, a Cross key is assigned to XY axis.

Advanced_RecordFF=The log of force feedback is taken.

;Change-End



Advanced_DisableFF=Disable Force Feedback

Advanced_DualShock2Analog=will be used as an analog pad.

Advanced_DualShockIsAlwaysAnalog=Dualshock is always analog mode. 



;   ----------

; < About Page > -------------------------------------------

;   ----------



About_Title=about



;Change-Start

About_Product=Product & Version

About_Language=Localization





About_IniFile=Language File

About_SelectIniButton=Select



;Change-End



About_Translator=Thanks for All my Friends 



Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.52