D-Link PCI Fast Ethernet Adapter with Optical Fiber Interface
Installation for NetWare DOS ODI Driver
Getting Started
ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
The NOVELL installation diskettes or CD ROM are needed to
complete this install.
First installation from CD ROM
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Please make sure CD ROM player work fine under DOS environment.
Run INSTALL.BAT and press any key to accept the agreement.
Ex. >INSTALL
Select "Client Installation" in Select the type of installation
desired window.
Select "NetWare DOS/WINDOWS Client (VLM)" in Select Client to
be installed window.
Specify your target directory, installation default path is
C:\NWCLIENT. (suggestion: DON'T CHANGE)
Allow system to modified your AUTOEXEC.BAT and CONFIG.SYS.
Specify YES to install support for MS Windows, if you accept.
Move the highlight bar to Select the driver for your network
board and press <Enter>.
Put the released diskette into floppy disk and go to bottom
Select "OTHER DRIVERS" under Network Board.
Please insert release driver diskette into floppy disk.
Specify the full path of ODI for DOS driver, A:\<PATH>.
Ex. A:\
Select "D-Link PCI Fast Ethernet" for Ethernet Adapter.
Move to "Highlight here and press <Enter> to install".
Press <Enter> after you configure correctly, then installation
will copy necessary file to your hard disk.
Restart your system and connect to NetWare server.
Manual Installation
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Assume you have installed NetWare Client for DOS system.
Copy <PATH>\DLKFX.COM file from released diskette into the
NetWare client directory containing LSL.COM, IPXODI.COM,
NETx.COM or VLM.COM, VLM files.
Ex. >COPY A:\DLKFX.COM C:\NWCLIENT
A typical Client for DOS startup batch file includes:
Content of STARTNET.BAT
-----------------------
SET NWLANGUAGE=English
C:\NWCLIENT\LSL.COM
C:\NWCLIENT\DLKFX.COM
C:\NWCLIENT\IPXODI.COM
C:\NWCLIENT\VLM.EXE
F: ; According FIRST NETWORK DRIVE of
NET.CFG
LOGIN XXXX ; Login to server, XXXX is user name
; Notes: C:\NWCLIENT\VLM.EXE /PS=SSSS ; SSSS is server name
Content of NET.CFG
------------------
Link Driver DLKFX
FRAME ETHERNET_802.2
FRAME ETHERNET_802.3
FRAME ETHERNET_II
FRAME ETHERNET_SNAP
How to creat Diskettes for installation
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Please make sure CD ROM player work fine under DOS environment.
Run INSTALL.BAT and press any key to accept the agreement.
Ex. >INSTALL
Select "Diskette Creation" in Select the type of installation
desired window.
Select "NetWare DOS/WINDOWS Client (VLM)" in Select the
Diskette set to be created window.
Following screen's instruction.
Installation from Diskettes
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Run INSTALL program and press any key to accept the agreement.
Ex. >INSTALL
Please reference above "First installation from CD ROM".
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.