This driver is provided for convenience. It has been tested with
UnixWare* version 7.1.3, 7.1.4. It will also work with OpenServer 6.0.0.
For any UNIX support questions as well as updated drivers,please contact
the OS vendor (SCO).
Details
========
The e1008g driver supports following Gigabit Server Adapters:
- HP NC6170 Dual Port PCI-X 1000SX Gigabit Server Adapter
- HP NC7170 Dual Port PCI-X 1000-T Gigabit Server Adapter
- HP NC310F PCI-X Gigabit Server Adapter
- HP NC340T PCI-X Quad-port Gigabit Server Adapter
If you are looking for the support of these Gigabit Server Adapters,
install the e1008g driver available on this CD.
Installing the e1008g Driver for UnixWare 7 & OSR 6.0.0
=======================================================
To install the e1008g driver for UnixWare 7 and OSR 6.0.0:
1. Copy the e1008g.pkg file into any directory on the
UnixWare system, such as in the /tmp directory.
2. Make sure no other users are logged on and all user applications
are closed.
3. If there is an older version of the e1008g driver on the system, first
run 'netcfg' and remove any configured NICs. Exit 'netcfg'. Remove
the old driver by typing 'pkgrm e1008g'. (You can find the driver version
by typing 'pkginfo -l e1008g'.)
4. Install the new driver using 'pkgadd'. For example:
# pkgadd -d /tmp/e1008g.pkg
5. Run 'netcfg' to add and configure the NICs.
6. Reboot the system.
If you are looking for the support of Gigabit Network Controllers,
download the hp ProLiant EFS for SCO UnixWare 7.1.X and Open Server 6.0.0.
Please refer to EFS documentation for more details.
EFS Download
============
The latest hp ProLiant EFS for UnixWare 7.1.X and Openserver6, version 7.70A can be
downloaded from HP support web site:
http://h18023.www1.hp.com/support/files/server/us/download/23643.html
NOTE: If you require Hot Plug PCI capabilities, the DDI 8 e1008g driver must
be used. For more information about Hot Plug PCI capabilities please
refer to SCO UnixWare 7 & OpenServer 6.0.0 documentation.
Note: 802.3 Flow - Control should only be enabled when the adapter is
connected to a peer which fully supports 802.3 flow control.
Copyright 2003-2006, Hewlett-Packard Development Company, L.P.
* Third-party trademarks are the property of their respective owners.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.