[TITLE] MAINTITLE=Philips PCA70PS Setup README=README.TXT [MSGSTATUS] STATUS=NOTE: Read the message carefully. [STATUS] MSGBOX=NOTE: Read the message carefully. README=<UP>,<DOWN>,<PGUP>,<PGDN>:Scroll; <ESC>:Leave TITLE=Press any key... HWSETTING=<UP>,<DOWN>:Choose; <ENTER>:Change; <ESC>:Cancel; <F3>:Exit HWSETTINGWIN=<UP>,<DOWN>:Choose; <ENTER>:Change; <B>:Back; <ESC>:Cancel; <F3>:Exit LISTBOX=<UP>,<DOWN>:Move selection; <ENTER>:Choose; <ESC>:Cancel GETSTR=<EDIT KEYS>:Move cursor; <ESC>:Cancel; <ENTER>:Accept CHOOSE1=<UP>,<DOWN>,<TAB>:Move selection; <Enter>:Choose; <F3>:Exit; <ESC>:Cancel COPYFILE=Copying necessary files to your hard disk... CONFIRMPATH=<UP>,<DOWN>,<TAB>:Move selection; <Enter>:Make change; <ESC>:Cancel MODIFY=Modifying system files...... [FAILUNINSTALL] CAP=Uninstallation Fail MSG=Fail to uninstall PCA70PS software. [NOTINSTALLED] CAP=Not Installed MSG=You have not installed PCA70PS software before. Or MSG=PCA70PS data files in your destination directory MSG=have been corrupted. You should install PCA70PS MSG=software all over again. [IRQCONFLICT] CAP=Interrupt Conflict MSG=Interrupt for MPU-401 cannot be the same as MSG=Digital Audio Interrupt. Please change the MSG=settings accordingly. [DMACONFLICT] CAP=DMA Channel Conflict MSG=If you select "Full Duplex" or "Enhanced Full Duplex" MSG=mode, the Digital Audio Recording DMA Channel cannot MSG=be the same as the Digital Audio Main DMA Channel. MSG=Please change the settings accordingly. [HWSNOTCOMPLETE] CAP=Exit Setup MSG=Hardware Settings of PCA70PS card is not completed. MSG=Are you sure you want to exit setup now? [WAITING] WAITHW=Reading data, please wait... WAITCP=Reading data, please wait... WRITE=Writing data, please wait... MODIFY=Reading data, please wait... CONFIGURE=Reading data, please wait... [HWSERROR] CAP=Hardware Configuration Error MSG=Error occured during the process of MSG=hardware configuration. [SETUPEXIT] CAP=Exit PCA70PS Setup MSG=If you have not yet completed the installation of MSG=PCA70PS software, the sound card cannot work properly. MSG=Are you sure you want to exit Setup now? [SETUPCOMPLETE] CAP=Setup Completed MSG=The setup of PCA70PS card is completed. MSG=The original profiles: MSG= MSG= <&1> MSG= <&2> MSG= MSG=are copied to MSG= MSG= <&3> MSG= <&4> MSG= MSG=in the directory: <&5>. [REBOOT] MSG=******************************************* MSG=* You should REBOOT your system for the * MSG=* settings to take effect. * MSG=* * MSG=* Please press CTRL-ALT-DEL now... * MSG=******************************************* [UNINSTALLCOMPLETE] CAP=Uninstall Completed MSG=Uninstallation process of PCA70PS software is completed. MSG=The original system profiles before uninstallation: MSG= MSG=<&1> MSG=<&2> MSG= MSG=are copied to MSG= MSG=<&3> MSG=<&4> MSG= MSG=in the directory: <&5>. [UNINSTALLABORT] CAP=Uninstallation Aborted MSG=Uninstallation process of PCA70PS card is aborted. [CONFIGCOMPLETE] CAP=Hardware Configuration Completed MSG=Hardware settings for your PCA70PS card MSG=have been successfully modified. MSG MSG=You should reboot your system for MSG=the settings to take effect. [INVALIDPATH] CAP=Invalid Path MSG=<&1> is not a valid path. [INVALIDSETUP] CAP=Invalid Setup Path MSG=Cannot find SETUP.EXE. MSG=<&1> is not a valid setup path. [PATHEXIST] CAP=Path Already Exists MSG=The path "<&1>" already exists. MSG=Do you want to install the software into MSG=the specified path? [CANNOTCREATE] CAP=Fail Create Path MSG=Unable to create the directory: <&1>. [NOSETUPINF] CAP=No SETUP.INF MSG=Cannot find SETUP.INF in this path. [PATHNOTEXIST] CAP=Path Not Exist MSG=The path <&1> doest not exist. [NOTWINPATH] CAP=Incorrect Windows Directory MSG=The path <&1> is not a correct Windows directory. [ASKWIN] CAP=Install Windows Utilities and Drivers MSG=Do you want to install PCA70PS Windows utilities and drivers? [CONFIRMPATH1] CAP=Confirm Paths MSG=Source Path: <&1> MSG=Destination Path: <&2> MSG=Windows Path: <&3> MSG MSG=Are these paths correct? [CONFIRMPATH2] CAP=Confirm Paths MSG=Source Path: <&1> MSG=Destination Path: <&2> MSG=Are these paths correct? [HDNOTENOUGH] CAP=Insufficient Space MSG=The free space of the specified hard disk MSG=is insufficient. MSG=Please retry with another path. [CANTBACKUP] CAP=Fail Backup Profiles MSG=Fail to backup system profiles. [INSTDOSERR] CAP=Fail Install DOS Drivers MSG=Some error occurred during installing DOS drivers. MSG=Please retry the installation procedure. [INSTWINERR] CAP=Fail Install Windows Drivers MSG=Some error occurred during installing Windows MSG=drivers and utilities. MSG=Please retry the installation procedure. [CANTLOG] CAP=Fail Write Installation Log MSG=Cannot write the installation log file. MSG=Please retry the installation procedure. [CANTWRITEPAR] CAP=Fail Write SETUP.INF MSG=Cannot write information to SETUP.INF. [CANTMDFDOS] CAP=Fail Modify Profiles MSG=Cannot modify DOS profiles. [CANTMDFWIN] CAP=Fail Modify Profiles MSG=Cannot modify Windows profiles. [HWSERR] CAP=Hardware Configuration Error MSG=Some error occurred during the process of MSG=hardware configuration. MSG=Please retry the installation procedure. [FAILESSENTIAL] CAP=Fail Copy Essential Files MSG=Fail to copy essential files to the MSG=destination directory. [FAILCOPY] CAP=Fail Copy Files MSG=Error occurred during copying files. [OVERWRITE] CAP=Destination File Exists MSG=Replace File: <&1> MSG= <&2> MSG= <&3> bytes MSG= MSG=With File : <&4> MSG= <&5> MSG= <&6> bytes MSG= MSG=Do you want to overwrite the original file? [INPUTBOX] SOURCEDIR=Source directory DESTDIR=Destination directory WINDIR=Windows directory [REQUIRESETUPINF] CAP=SETUP.INF Required MSG=Cannot find SETUP.INF. MSG=Please input the location of SETUP.INF. [PROMPTDISK] CAP=Copy Files MSG= MSG=Please insert the diskette: MSG=<&1> MSG=for the file <&2>. Or input the path MSG=where the file is located. [CANTFINDFILE] CAP=File Not Found MSG=Cannot find <&1> in the directory: MSG=<&2> [MSGBOXPROMPT] PROM=OK PROM=Cancel PROM=OK PROM=Abort PROM=Retry PROM=Ignore PROM=Yes PROM=No [CONFIRMINSTALL] MSG=CONFIG.SYS and AUTOEXEC.BAT will be modified during MSG=the installation process. MSG= MSG=If you choose to install Windows utilities and drivers, MSG=then SYSTEM.INI and WIN.INI will be modified too. MSG= MSG=Setup program will backup those files in the destination MSG=directory and rename them with the extension ".###". MSG=For example, CONFIG.SYS will be renamed as CONFIG.###. MSG= MSG=Do you want to proceed the installation ? [CONFIRMUNINSTALL] CAP=Confirm Uninstallation MSG=Setup program is going to remove all entries in system MSG=files which invoke PCA70PS card software and drivers. After MSG=the uninstallation procedure those software and drivers MSG=will be no longer valid. MSG=Are you sure you want to proceed? [REMOVEFILE] CAP=Remove Files MSG=Do you want to delete the files of the MSG=PCA70PS card software and drivers? [UNINSTFAILBACKUP] CAP=Fail Backup Profiles MSG=The current profiles of your system cannot be safely MSG=backup. You may want to backup them before starting MSG=the uninstallation process. MSG=Do you want to proceed anyway? [CANTCD] CAP=Fail Change Directory MSG=Cannot change to the directory: <&1>. [BACKUPERR] CAP=Fail Backup Profiles MSG=Unable to backup profile: <&1> MSG=You may need to backup the file manually MSG=before running setup. [QUERYREBOOT] CAP=Reboot System MSG=Do you want to reboot the system now? [REMOVEDISK] CAP=Remove Diskette MSG=Please remove the diskette in the floppy drive. [NOREADME] CAP=README.TXT Not Found MSG=Cannot find README.TXT in the source directory. [PARSEERR] CAP=SETUP.INF Parse Error MSG=Parse error in SETUP.INF. MSG=<&1> [EXTRAQUOTE] CAP=Extract Parameter Error MSG=Extra or missing quote. [NOVARS] CAP=Cannot Find VARS MSG=Can't find variable <&1> in <&2>. [RESTOREERR] CAP=Fail Restore Profiles MSG=Unable to restore the profile: <&1> MSG=You should manually restore it from: <&2> [FAILMDFPROFILE] CAP=Fail Modify Profiles MSG=Fail to modify system profiles. [PROGRESSMSG] PROGMSG=Setup is modifying [NOTVALIDSETUPDIR] CAP=Invalid Source Directory MSG=Cannot find nessary files in the directory: MSG=<&1>. It is not a valid source directory. MSG=Please enter the correct path again. [COPYFILE] MSG= Setup is copying files... MSG= MSG= From : MSG= To : [WINTOBEINSTALLED] CAP=Install Windows Drivers & Utilities MSG=Setup has detected that you have Philips PCA70PS Windows MSG=drivers and utilities installed in the previous MSG=installation procedure. Setup is going to install the MSG=same software to your Windows directory: MSG=<&1>. MSG= MSG=Select OK to proceed, CANCEL to abort the currect MSG=installation procedure. [PNPINSTALLED] CAP=Plug and Play Detected MSG=The Plug and Play Configuration Manager is MSG=detected on your system. The hardware settings MSG=will be automatically configured by the MSG=Configuration Manager on the next starting up of MSG=your system. [BORDER] TL=218 TR=191 BL=192 BR=217 VER=179 HOR=196 CL=180 CR=195 [BORDERJ] TL=1 TR=2 BL=3 BR=4 VER=5 HOR=6 CL=23 CR=50 [SHADOW] SL=220 SB=223 [SHADOWJ] SL=0 SB=0 [COPYINDICATOR] FILL=219 [COPYINDICATORJ] FILL=20 [MJ20CHECK] PRODUCT=PCA70PSDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.