================================================================== BIOS FLASHING INSTRUCTIONS (Using a bootable 3.5" System Diskette) The following instructions explain how to flash the system BIOS of your PC. These instructions apply to the HP DOS flasher called PHLASH. Use these instructions if your PC runs with : - DOS 5.0 or above - Windows 3.1 or Windows For Workgroup If your PC runs under Windows NT or Windows 95, please refer to the directory named 'TopTools'. ================================================================== CONTENTS A1. Creating the BIOS installation diskette A2. Flashing the BIOS A3. Switches A4. Localization A5. Error messages A6. Making the diskette's label ================================================================== A1. CREATING THE BIOS INSTALLATION DISKETTE a. Create a bootable system diskette To flash a non-US BIOS, go to § A4, else go to step b. b. Copy the contents of this directory onto this diskette: 'copy *.* A:' (Assuming that your diskette drive is A:) ================================================================== A2. FLASHING THE BIOS a. Insert the BIOS installation diskette into the A: drive b. Boot the PC from the diskette to ensure a clean boot. c. Launch the flashing command by typing from A: the following command: 'Flash' ================================================================== A3. SWITCHES (FOR ADVANCED USERS ONLY) The following switches have to be used behind the phlash.exe program. Ex: phlash.exe /B=PLATFORM.BIN /CS /V /mode=3 /B Binary file to be loaded as platform.bin /CS Check BIOS image file checksum before flashing /V Compare BIOS image file and flash EEPROM after flashing /C BIOS will automatically load CMOS default at following boot /P Production mode: no screen outputs, no beeps, auto reboot /S Silent: no beeps /EXIT Exit to DOS instead of rebooting ================================================================== A4. LOCALIZATION To flash a localized BIOS. a. Make sure a version of 'pkunzip.exe' is on your 'Path=' b. Go to the directory c:\bios\...\<Version Name> and launch the 'Language.bat' file with the localization you wish. This will copy the localized bios file in the 'SystDisk' and 'TopTools' directories. The letters for each language could be: DA: Danish DU: Dutch FI: Finnish FR: French GR: German IT: Italian NO: Norwegian PO: Portuguese SP: Spanish SW: Swedish US: US English For example: French bios, type 'Language FR' The main package contains an US English BIOS, US English BIOS file is HA0704US.FUL French BIOS file will be HA0704FR.FUL c. Return back to the 'SystDisk' directory and copy its content into this diskette: 'copy *.* A:' (Assuming that your diskette drive is A:) d. Insert the BIOS installation diskette into the A: drive e. Boot the PC from the diskette to ensure a clean boot. f. Launch the flashing command by typing from A: the following command: 'Flash FR' ================================================================== A5. ERRORS MESSAGES If you get the flash error messages describe below, follow the instructions as given: CANNOT FLASH USING USER PASSWORD, USE ADMIN PWD it is because you have enabled password on boot and booted as a user. User boot doesn't allow flashing BIOS. ==> Reboot with your ADMIN password. OPEN FAILED ON BIOS ROM IMAGE FILE you probably tried to flash protect switch SW1-1 ON ==> Switch it to OFF to enable BIOS flash. ================================================================== A6. MAKING THE DISKETTE'S LABEL Texts to be written on diskette's label are given in the attached "disk.txt" file in the following fields: * Title * Subtitle * Version * Copyright 1 * Copyright 2 Example : * Title=HP VL4 5/xx (S3 Trio 765 64V+) * SubTitle=OS/2 Warp video driver,disk 1/2 * Version=1.573 * Copyright1=Copyright (c) Hewlett-Packard Co. 1996 * Copyright2=Copyright (c) S3,Incorporated 1995 ------------------------- | | | \ | | | | | | | | | |____________| | | | | --------------------- | | | Title | | | | | | | | Subtitle Version | | | | | | | |Copyright 1 | | | |Copyright 2 | | | | | | | --------------------- | --------------------------- ==================================================================Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.