+++++++++++++++++++++++++++++++++ + BIOS FLASHING INSTRUCTIONS + +++++++++++++++++++++++++++++++++ ================================================================ The following instructions explain how to flash the system BIOS of your PC from a floppy diskette. These instructions apply to the HP flash program called PHLASH. ================================================================ CONTENTS 1. Creating the BIOS installation diskette 2. Flashing the BIOS 2.1 Safe flash process. 2.2 Crisis recovery mode. 2.3 Standard flash process. 3. Parameters 4. Error messages and warnings. 5. Making the diskette's label 6. Glossary 1. CREATING THE BIOS INSTALLATION DISKETTE ------------------------------------------ a. Create a system diskette b. Copy the contents of this directory onto this diskette: copy *.* A: (Assuming that your diskette drive is A:) 2. FLASHING THE BIOS -------------------- 2.1 Safe flash process (Bootblock not flashed). ----------------------------------------------- Use this one preferably if you are upgrading from HN.02.xx, HN.01.09 or HN.01.06 -------------------------------------------------------------------------------- a. Insert the BIOS installation diskette into the A: (B:) drive b. Boot the PC from the diskette to ensure a clean boot. c. Launch the flashing command by typing from A: (B:) the following command: flash 2.2 Crisis recovery flash process. ---------------------------------- To be used if your bios is corrupted and you can't boot normally ---------------------------------------------------------------- Download from HP web site the Crisis recovery package available in VL8 Bios section, and follow instructions. 2.3 Standard flash process (Bootblock flashed). ----------------------------------------------- Use this one if the bios version that you upgrade is lower than HN.01.06 ------------------------------------------------------------------------ a. Insert the BIOS installation diskette into the A: (B:) drive b. Boot the PC from the diskette to ensure a clean boot. c. Launch the flashing command by typing from A: (B:) the following command: phlash /V /mode=3 /pf=b /b=platform.bin hn0204us.ful 3. PARAMETERS (FOR ADVANCED USERS ONLY) --------------------------------------- The following parameters can be used behind the phlash.exe program. /H displays the help screen with all parameters available /B Binary file to be loaded as platform.bin /V Compare BIOS image file and flash EEPROM after flashing /C BIOS will automatically load CMOS default at following boot /P Production mode: no screen ouptuts, no beeps, auto reboot /S Silent: no beeps /EXIT Exit to DOS instead of rebooting /pf=b Standard flash process. The Bootblock is flashed. /MODE=3 Updates DMI strings. Ex: phlash.exe /B=platform.bin /C /V /pf=b 4. ERRORS MESSAGES AND WARNINGS ------------------------------- If you get the flash error messages described below, follow the instructions as given: CANNOT FLASH USING USER PASSWORD, USE ADMIN PWD it is because you have enabled password on boot and booted as a user. User boot doesn't allow flashing BIOS. ==> Reboot with your ADMIN password. Warning: -------- - Power button is not protected in Safe flashing mode. However, since the Bootblock is not flashed, shutting down during the flash update is not critical. - Flashing in crisis mode is blind (no video), except if you plug an external ISA video card. - Since the Bootblock part is not flashed in Safe or Crisis mode, the Bootblock will still be the one of the old bios. 5. MAKING THE DISKETTE'S LABEL ------------------------------ Texts to be written on diskette's label are given in the attached "disk.txt" file in the following fields: * Title * Subtitle * Version * Copyright 1 * Copyright 2 Example : * Title=HP Vectra VL 6/xxx Series 8 * SubTitle=DMI Flashable BIOS * Version=HN.02.04 * Copyright1=Copyright (c) Hewlett-Packard Co. 1997 * Copyright2=Copyright (c) Phoenix Technologies Ltd, 1995 ------------------------- | | | \ | | | | | | | | | |____________| | | | | --------------------- | | | Title | | | | | | | | Subtitle Version | | | | | | | |Copyright 1 | | | |Copyright 2 | | | | | | | --------------------- | --------------------------- 6. GLOSSARY ----------- Bootblock: ---------- this is a part of the Bios EEPROM which contains enough code to allow the PC to boot on a floppy drive, and then flash the bios. If the bios is corrupted but the bootblock is OK, the user can still re-flash his bios (he forces the PC to boot on the floppy by closing switch 9). Standard flash process : ------------------------ this is the flashing process which updates the entire Bios ROM. If a main power loss occurs during the flashing process, the bios can be corrupted and the motherboard may need to be changed. Safe flashing mode : -------------------- this is the flashing process which preserves the Bootblock. This is the one that HP recommends to use. If a power loss occurs during flashing process, the PC can still recover using Crisis Recovery flashing process. Crisis recovery flash process : ------------------------------- this is the same as Safe flashing except that the user forces the boot on the floppy by closing switch 9. The bootblock is not flashed. The video is blank during flash process.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.