Windows 98, Windows2000
Introduction:
-------------
This document describes the procedure to install Windows 98
and Windows 2000 driver for 10/100M PCI Fast Ethernet Adapter.
Location of Driver: \W98_2000\R8139N5.SYS
Installing driver procedure on Microsoft Win98/windows2000 :
-----------------------------------------------------
Before you start with the installation process, make sure that your
adapter should be properly installed in your PCI bus slot.
Executing Win98/Windows2000, it will auto-detect your system
configuration and find the adapter hardware. ( If Win98/windows2000
does not prompt that it detects the PCI Ethernet adapter,there must
be something wrong with the 10/100M PCI Fast Ethernet Adapter or your
system enviroment.)
1. Ask you to select which driver you want to install, select "Driver
from disk provided by hardware manufacturer".
2. Insert the 10/100M PCI Fast Ethernet driver disk into drive A and
specify the setup file pathname A:\W98_2000.
3. Win98/Windows2000 will appear some messages to insert Win98/win2000
system disk to complete setup step.
4. Win98/Windows2000 will finish the other installation procedure
automatically, then you restart the system.
-- Vincent Cheng --
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.