MSLANMAN.TXT Driver File Contents (

   LAN Manager Workstation/Server

   This document describes the procedure to setup LAN  Manager 2.1
   Workstation/Server driver for 10/100M PCI Fast Ethernet Adapter.


   Sample Configuration Files:
      CONFIG.SYS (for DOS will contain):


      CONFIG.SYS (for OS/2 will contain):


          PROTOCOL.INI (will contain):

         EtherID=@52544C111111  ;This  keyword is used to desinate a 
                                ;adapter by assigning its ethernet ID
                                ;when more than one adapters exist on one
                                ; system.

         BusNo=@00          ;This  keyword is used to desinate a 
                            ;adapter by assigning it's PCI bus number
                            ;when more than one adapters exist on one
                            ; system.(must be used with 'DeviceNo' keyword)

         DeviceNo=@0A       ;This  keyword is used to desinate a 
                            ;adapter by assigning it's PCI Device number
                            ;when more than one adapters exist on one
                            ; system.(must be used with 'BusNo' keyword)

         Medium Type=_AUTO    ;This keyword is used to force the adapter
                     _10HALF  ;to medium 10M Half Duplex, 10M Full Duplex
                     _10FULL  ;100M Half Duplex,100M Full Dulpex or
                     _100HALF ;Autonigotiation mode

   Setup driver procedures on LAN Manager workstation/server :
      Before you start with the installation process, make sure that the
      adapter  is properly  installed  and  configured. Make  sure  your
      Microsoft LAN Manager is properly installed.

      1. Run the appropriate Microsoft Lan Manager SETUP for computer you
         are setting up.(DOS, OS/2 or OS/2 Server). Select "Configuration"
         item ,(the 10/100M driver isn't included on the Lan Manager disk)
         and insert the 10/100M PCI Fast Ethernet driver disk, select the
         10/100M driver and follow the directions.

      2. When completed, reboot your computer.

       Installing Multiple LAN Adapters:

          To Follow Setup driver Procedure and add two adapter,

          Under  DOS  mode, you can modify the EtherID or BusNo+DeviceNo
            Keyword field in file C:\LANMAN\PROTOCOL.INI.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 2.82