SiS6326 Windows 2000 Driver Installation Procedure (V1.31e)
¡° SiS6326 driver has been include in Windows 2000 system. There is
one default 6326 driver "6326/530" VGA driver you will find it in
Windows 2000 device driver list. Usually, Windows 2000 will auto completely
install 6326 driver when system is built up. User can select 6326 driver
from windows 2000 device library too. If you change your windows 2000 system
from other VGA card to 6326. Please reference windows 2000 user manual to
setup your system. Below here are some information about 6326 VGA driver
installation, these information is useful for SiS6326 users without windows 2000
manual.
¡° Windows 2000 supports Plug and Play function so a SiS6326 card will be detected
automatically by a Windows 2000 system if it is installed at the first time.
A "Found New Hardware Wizard" will appear to guide users to locate the driver.
Here is the driver installation procedure.
1. Press "Next" in "Found New Hardware Wizard" to continue.
2. The wizard will show the found device as "Video Controller (VGA compatible)" and
ask what to do next. Select "Display a list of the known drivers for this device
so that I can choose a specific driver" then press "Next".
3. Select "Display Adapters" as the hardware type then press "Next".
4. The wizard will give a list of display devices and ask to select a device driver.
Press "Have Disk".
5. A "Install From Disk" will pop out. Press "Browse¡K" to assign the driver path.
6. In the "Locate File" window, find out the file "Sisv6326.inf" then press "Open".
7. After go back to "Install From Disk" window, press "OK".
8. After go back to "Select a device driver" window (step 4), a "SiS 6326" message will
appear as "Models". Press "Next".
9. Press "Next" under window "Start Device Driver Installation" to proceed the installation.
10. After the installation is complete, the wizard will inform users the completeness.
Press "Finish".
11. Restart the computer.
¡° If the "Found New Hardware Wizard" does not pop out itself, users are able to start it up
by the following steps.
1. Open "My Computer".
2. Open "Control Panel".
3. Open "Add/Remove Hardware".
4. The "Add/Remove Hardware Wizard" will appear. Press "Next".
5. Select "Add/troubleshoot a device" as hardware task then press "Next".
6. Select "SiS6326" or "None of the following devices" then press "Next".
7. This will guide users to the above step 2. Now, users are able to follow up the
procedure to finish the installation.
¡° If SiS6326 driver has ever been installed and a user would like to update its driver,
he/she can follow up the below steps to do it.
1. Open "My Computer".
2. Open "Control Panel".
3. Open "System".
4. Select "Device Manager" under the tab "Hardware" in "System Properties".
5. Double click on "SiS 6326".
6. Open "Driver" under "SiS 6326 Properties".
7. Press "Update Driver".
8. The "Upgrade Device Driver Wizard" will guide users to finish the procedure.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.