7 Workstation: Windows NT with NetWare Client Services
v1.1
Windows* NT* 4.0 and Novell NetWare Client Services driver installation
notes for Compaq 10 and 10/100 Controllers and the NC3121 Fast Ethernet NIC
===========================================================================
Location of driver: \NWSERVER\N100.LAN
\NWSERVER\OEMSETUP.INF
General instructions for Novell NetWare* Client Services under Windows NT
using the ODI server driver.
=========================================================================
1 Install the Novell NetWare Client Services per the instructions
provided by Novell.
Note: If the NDIS driver for the Compaq 10 or 10/100 controller is
installed and you want to use the NetWare 32 ODI LAN driver, remove
the NDIS driver from NT before going to step 2. Novell NetWare Client
service can be run with the NDIS 3 driver.
2 Start Windows NT and log in as ADMINISTRATOR (or another valid user
name).
3 Double-click the "Network" icon in the Control Panel. The "Network
Settings" screen appears.
4 Select the Adapter tab.
5 Click the "Add" button.
6 Click the Have Disk button.
7 Insert the Compaq Configuration and Drivers Disk into your floppy drive
and type A:\nwserver. Click OK to continue.
8 When "ODI Compaq 10/100 Controller for NetWare" or
"ODI Compaq 10 controller" or "Compaq NC3121 Fast Ethernet NIC"
appears, click OK.
9 After the files are copied, the default driver settings will be
displayed (they'll be displayed with their defaults which in most
cases is OK). Click OK when correct.
NOTE: Do not click on Advanced Settings. See the section titled
Advanced Setting below.
Speed: Specifies the line speed of the controller (Compaq 10/100
controller only).
0 = Auto detect (default)
10 = 10 Mbps
100 = 100 Mbps
ForceDuplex:
0 = auto-negotiate (default)
1 = half duplex
2 = full duplex
Note: If the controller is set to half or full duplex, set the SPEED
parameter to either 10 or 100. (see SPEED)
10 You will have to restart Windows NT to complete the installation.
Advanced Settings
=================
Only select Advanced Settings if you want to use local Administration of
Addressing or use multiple Compaq 10 or 10/100 controllers. Entering
Advanced Setting requires that you know the slot number the controller is
using.
1 To get to Advanced Setting from the Network Dialog box selected the
Adapters tab and highlight the ODI Compaq controller
and click Configure.
2 Click Advanced.
3 There are 2 advanced options, Node Address Override and Slot.
NODE ADDRESS OVERRIDE: Use this option to provide your own unique node
address for the controller. The node address is a 12-digit hexadecimal
number; the second digit must be one of the following digits: 2, 6, A,
E.
SLOT: Select the slot number the controller is in. Only necessary if
multiple Compaq controller cards are being used. Before
clicking OK, you must enter a valid slot number. To exit without
saving a slot number, click Cancel.
* Third-party trademarks are the property of their respective owners.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.