2 Server: NetWare 3.12 & 4.10 servers
v1.1
NetWare* 3.12 and 4.10 Server Driver Installation Notes for Compaq
10 and 10/100 Controllers and the Compaq NC3121 Fast Ethernet NIC
==================================================================
Location of driver: \NWSERVER\N100.LAN (ODI Assembly Specification
version 3.3)
Location of NLMs: Novell's automated services (LANDR9.EXE or greater)
NOTE: LANDRx.EXE is a Novell archive that contains the latest
server NLMs and support files. The x in LANDRx.EXE is subject
to change with each new release of the archive.
These instructions are for use with the ODI Assembly Specification v3.30
NLMs. The \NWSERVER\N100.LAN driver on this disk is written to this
specification. To load the driver on NetWare 4.1x or 3.12 requires
updated ETHERTSM, MSM and the new NBI.NLM. Obtain these files from
Novell's automated services.
For NetWare 4.10:
NBI.NLM (ver 1.49, 08/30/96 or newer)
MSM.NLM (ver 3.18, 08/22/96 or newer)
ETHERTSM.NLM (ver 3.11, 07/03/96 or newer)
For NetWare 3.12:
NBI31X.NLM (ver 1.49, 08/30/96 or newer)
MSM31X.NLM (ver 3.18, 08/22/96 or newer)
ETHERTSM.NLM (ver 3.11, 07/03/96 or newer)
Note: NBI.NLM (or NBI31X.NLM) must be loaded before MSM and ETHERTSM.
NetWare 3.12 needs MSM31X.NLM renamed to MSM.NLM.
Sample load commands
====================
LOAD C:<PATH>\N100 SLOT=n FRAME=ETHERNET_802.2
BIND IPX TO N100 NET=xxxxxxxx
General Instructions
====================
1 Install NetWare 3.12 or 4.1x according to the NetWare instructions.
2 Copy the Compaq server driver (\NWSERVER\N100.LAN) and
any updated NLMs, to the NetWare server's hard drive.
If you can't log in to the server (before starting the server) copy
the N100.LAN driver from the \NWSERVER directory on the Compaq
Configuration and Drivers disk to the root directory of the server's
hard drive.
If you can log into the server, copy the driver to the SYSTEM
subdirectory. If you do this, you won't need to specify a path on the
load line. If you copy it to another directory, make sure the LOAD
statement includes the correct path.
3 Start the server. At the server console, load NBI, MSM and ETHERTSM
(for NetWare 3.12 load NBI31X, MSM31X and ETHERTSM) in this order.
Next, load and bind the server driver as follows:
LOAD C:<PATH>\N100 SLOT=x FRAME=ETHERNET_802.2
BIND IPX TO N100 NET=xxxxxxxx
Where:
SLOT=x Specifies the NBI (NetWare Bus Interface) slot number.
Substitute x with the valid value for the controller. You will be
prompted with the slot number(s) of installed Compaq 10/100
Controllers. The NBI numbers are different from the slot number
indicated in the Compaq SETUP.EXE utility.
NET=xxxxxxxx is the unique network address for that LAN segment.
The default frame type is 802.2. If your workstation needs to use the
802.3 frame type, see the section later in this document about using
multiple frame types on one controller.
4 Add the load and bind statements you need to the server's AUTOEXEC.NCF
file so the Compaq driver loads automatically
each time the server starts.
Hints and tips
==============
1 If the error message MSGetPhysical is encountered:
Upgrade the ETHERTSM.NLM and MSM31x.NLM and be sure to rename
MSM31x.NLM to MSM.NLM
2 Installing multiple controllers:
If you have multiple controllers in a single server, each controller must
have a different NET number and SLOT number. Also, you may want to
name each controller. For example:
LOAD C:\N100 SLOT=3 NAME=LAN_A
BIND IPX TO LAN_A NET=222
LOAD C:\N100 SLOT=4 NAME=LAN_B
BIND IPX TO LAN_B NET=333
3 If you have problems loading the driver on multiple controllers and the
initialization fails due to "Insufficient RCBs," increase the number
of buffers allocated to the server. Add the following to STARTUP.NCF:
SET MINIMUM PACKET RECEIVE BUFFERS = 100 (or larger)
SET MAXIMUM PACKET RECEIVE BUFFERS = 500 (or larger)
The MINIMUM value you specify must be at least 30 times the number of
Compaq controllers in the computer.
Recommended settings:
1-3 controllers: 100
4 controllers: 150
The MAXIMUM you can specify depends on the amount of memory in the
server, but it must be greater than the MINIMUM.
4 Installing one controller with multiple frame types:
When binding multiple frame types to one controller, enter a LOAD and
BIND statement for each frame type. Each LOAD statement uses the same
SLOT number, but each BIND statement needs a unique network number.
You must also include a name on each load line to avoid being prompted
for the controller to bind IPX to.
Example:
LOAD C:\N100 SLOT=3 FRAME=ETHERNET_802.3 NAME=LAN8023
BIND IPX TO LAN8023 NET=77777
LOAD C:\N100 SLOT=3 FRAME=ETHERNET_802.2 NAME=LAN8022
BIND IPX TO LAN8022 NET=88888
5 Optional LOAD line parameters.
See readme NWPARAM.TXT titled NetWare Server Parameters for
additional information.
6 On NetWare 3.12 servers, if you have not updated LOADER.EXE
and SERVER.EXE, you will experience two problems:
a. After loading NBI31X.NLM, the following warning is displayed,
"This version of NetWare does not support protected mode BIOS
accesses. Without a loader patch, some PCI drivers may fail."
b. N100.LAN will fail to load and the program will report an error
stating that the controller in slot x has been disabled because
the hardware is not responding.
LOADER.EXE and SERVER.EXE need to be updated manually after applying
the latest Novell patches. There are two methods: either load
LSWAP.NLM from the console or run LSWAP.EXE from a DOS prompt.
Consult the README.TXT in Novell's latest patch files.
* Third-party trademarks are the property of their respective owners.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.