Hardware specifications v1.1 Specifications for Compaq 10 and 10/100 Controllers and the NC3121 Fast Ethernet NIC =================================================== System compatibility -------------------- PCI systems Media (Cable) connectors and wiring ----------------------------------- RJ45 Use Category 5 cabling for 100 Mbps networks. Use Category 3, 4, or 5 cabling for 10 Mbps networks. Supports 10Base-T Ethernet standard, IEEE 802.3 and 100BASE TX Fast Ethernet standard, IEEE 802.3u Data Rate mode -------------- 10 or 100 Mbps Interrupt levels ---------------- PCI: INTA SRAM Transmit/Receive Buffer ---------------------------- 6 Kbytes Power requirements ------------------ 2.5 Watts @ +5 VDC Isolation voltage ----------------- 200V RMS Operating temperature --------------------- 0 - 55 degrees C Humidity -------- 10% - 90% non-condensing Diagnostic LED -------------- Activity and Link at 10 Mbps Activity, Link, and Speed at 100 Mbps Diagnostic software ------------------- On-board On-network Responder * Third-party trademarks are the property of their respective owners.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.