;- This file gives examples of load and bind statements to ;- add to your AUTOEXEC.NCF and STARTUP.NCF files to set up ;- Network Fault Tolerance on the Compaq 10/100 controller or ;- the NC3121 Fast Ethernet NIC. ;- Setting up Network Fault Tolerance ;- ================================== ;- Copy the load statements below into the appropriate ;- files and customize them for your server. Parameters for ;- these statements are defined in your user documentation ;- and in the NFT readme files. ;- Copy these load statements into your ;- AUTOEXEC.NCF file, and customize them for your server: ;- Load Network Fault Tolerance load nft ;- Load LAN driver on 1st Controller load n100 slot=7 frame=ethernet_802.2 name=pri_802.2 load n100 slot=7 frame=ethernet_802.3 name=pri_802.3 load n100 slot=7 frame=ethernet_snap name=pri_snap load n100 slot=7 frame=ethernet_ii name=pri_ii ;- Load LAN driver on 2nd Controller load n100 slot=8 frame=ethernet_802.2 name=sec_802.2 load n100 slot=8 frame=ethernet_802.3 name=sec_802.3 load n100 slot=8 frame=ethernet_snap name=sec_snap load n100 slot=8 frame=ethernet_ii name=sec_ii ;- Bind ipx to 1st controller bind ipx pri_802.2 net=2 bind ipx pri_802.3 net=3 bind ipx pri_snap net=5 bind ipx pri_ii net=11 ;- Set the 2nd controller to be an Network Fault Tolerance ;- partner to the first controller nft bind 7 8 ;- Note: No protocols should be bound to the secondary ;- controller. All protocol bindings to the primary controller ;- will be transferred to the secondary if the primary link ;- fails.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.